display MERCEDES-BENZ CL COUPE 2006 Repair Manual

189
COM
AND
COM ANDad dress book
Sear chingus ing thelist
6 Ifne cess ary, sw itchf rom the smart
spel ler to the list (
=pa ge 188).
6 Turn ym zor slide qm run til th ede-
si red entry is highlighted in the list.
6 Sear chfor th edes ired en try
( = page 18 7).
6 Select "Options" "Delete".
A de letion prom ptappears.
6 Select "Yes"or "No".
Th e entry willei the rbedeleted or not,
de pe nd ing onyour select ion.
i Deleting anentry in the phon e book on the
mo bile phone delet esthe entry in the address
book as well as theon ein the phone boo kon the
mobil ephone. This de letion func tion is not sup-
por ted by all mobil ephones. Searchin
gfor the desi redentry
6 Sear chforan address book entry
( = page 187).
or 6
Select an address book entry in th ead-
dr es sbook bas icme nu (
=page 187).
6 Press n.
Th edeta iledview appears.
Illu stra tion: de tailed displ ayforho me de-
tails
1 To go bac kto the prev ious menu
2 Toswitch to busi ness det ails
3 Select eddata field
4 Icon forho me detai ls
5 Tocall up options Swi
tching be tween home and bu sine ss det
ails
6 Select icon 2.
The display switch es tohome orbusi-
nes sde tails, depending on the pre vi-
ou s sta tus. Se
lecti ng a differ entdata field
6 Turn ymz orslide qm r. Display
ingabbreviated content in full
6 Select "Options" "Detail" .
Th edis play is shown infull.
6 Toclos e the entir edispl ay: slide
o m por pr essn. Clo
sing the detai led disp lay
6 Select "Back". Deleting
anentry Displaying details
about an ad dress
boo kentry P6
8.20-5040 -31 216_R
E_2006-12a.book Seit e189 Montag, 2. Oktob er2006 12:06 12

190 COM
AND
COMAND addres sbook Se
arch ingfor the desire den try
6 Sear ch fo ran en tryinthephone book
on the mobilephone (
=pa ge 187).
or 6 Select an entry from the phone book on
the mobile phonein the address bo ok
ba sic me nu (
=page 187).
6 Press n.
The detailed view appear s.
1 Togo ba ck to the previou sme nu
2 Disp lay forp hone book on the mobi le
phone
3 To cal l upoptions Clo
sing the detai led display
6 Select "Back" .
Editi ngan ent ryin the phone book on the
mobile phone
i This func tion is not supported by all mobile
ph on es.
6 Sear chforan entry inthephone book
on the mobilephone (
=page 187).
or 6 Disp layt he deta ilsf rom an entry in the
phone book on the mobi lephone
( = page 189).
6 Select "Options" "Edit".
Th einput menu appe ars with the data
fiel ds.
6 Proc eed with the operat ingstep "To
cha ngeth edata fiel d" in the "Cr eating
an ew address book entry "se ction
( = page 186). Chan
ging anaddress book ent ry
6 Sear ch fo r the address book entry
( = page 187).
6 Select "Options" "Edit". or
6 Displ aydetails about anaddress book
entry (= page 189).
6 Select "Options" "Edit content" .
Th einput menuappe ars with the data
fiel ds.
6 Proc eed as ofthe step "Switchi ngbe-
twee nho me and busine ss details" in
th e"C reat ing a new ad dressbook en-
try "se ction (
=page 186).
Chan ging the des cription of
atel epho ne number data field
i Thisfun ctioni sn ot pos sibl ef or entrie sf rom
th e phon ebook on themobile phone.
6 Displ aythedeta ilsa bout anentry and
highl ight the telep hone num berdata
fiel d (
=page 189).
6 Select "Option s"  "Cha ngeca tego ry".
6 Select anu mb ercatego ry,e .g. "Hom e".
6 Select ate leph one catego ry,e. g.
"Landline telephone nu mber". Display
ingdetails from an entr yin
the phone bo okon them obile phone Cha
nging anentry 216_R
E_2006-12a.book Seit e190 Montag, 2. Oktob er2006 12:06 12

191
COM
AND
COM ANDad dress book
6 Select "Save".
COMAND stores the data ifthere are
fe we rth an fou rnumb ersassi gned to
th eentry you ares earching for in the
select ednumber catego ry.
Othe rwise, you wil lsee aprompt ask-
in g whe ther one of the existing num-
be rs shoul dbe ov erwritten.
6 Select "Yes"or "No".
After select ing"Ye s",a sele ction list
appear swit hthe fo urexis ting num-
be rs.
6 Select the num ber to be ov erwritten.
CO MA ND overwri testh eselec ted
nu mb er with th enew data.
Ad ding to a teleph onenu mb er data fi
eld
i Each addr ess bookentry may contai nupto
fo ur data fields for privat etelephone numbers
and four dat afields for business telephone num-
be rs.
This func tion is not pos sible for entri esfrom the
phone book on themo bile phone.
6 Display the details about anentry and
highlig htthe tel ephone nu mberdata
fiel d (
=page 189). 6
Select "Options" "Add tel. no." .
6 Select anum berca tego ry,e. g. "Home" .
6 Select atel ephone categ ory, e.g.
"Landline teleph one nu mber".
6 Select "Save".
COMA ND addsthe data field to the entry if
there arefe we r than four numb ers as-
si gne dto the entry inthe selected numb er
ca tegory. You can now enter anu mb erinto
the data field.
6 Proce edas of thestep "To enterd ata
in to a fi eld" inthe"Cre ating anew ad-
dr es sbook entry "section
( = page 186).
If fo ur numbers are already st ored for the
entr y in the selected number catego ry,a
prom ptwillap pear asking whe ther one of
the data fields shoul dbe ove rwritten.
6 Select "Yes"or"No".
If you select "Yes" ,asele ction list will
appear containing the four data fi elds.
6 Select the field to be overwritten.
CO MA ND deletes the nu mber of the se-
le ct ed field .Yo uca n now enter a new
nu mb erinthe data fiel d. 6
Proce edas of th estep "To enterd ata
into afield" inthe "Creating anew ad-
dress book entry" section
( = page 186).
i To do this,COMA ND must be equipped with
a te leph one*.Th e mobile phone must be ins ert-
ed in tothe brac ke t.
6 Disp laythe deta ilsabout anentry and
hi gh light the telephone numbe rdata
fiel d (
=page 189).
6 Press nands elect "Call".
The teleph one*mak esthe call. Th e
COMA NDdisplay sh owsteleph one
mod e.
i IfCOMA NDis not equipped with the text
me ssa ge functi on,th ete lephon e*star ts dialli ng
as soon as nis pr essed. Callin
ganum berstored inan entry 216_R
E_2006-12a.book Seit e191 Montag, 2. Oktob er2006 12:06 12

192 COM
AND
COMAND addres sbook i
The" Call" me nu item is only av ailable if
COMA NDisequi ppedwith th ete xt me ssage
fu nc tion.
or
6 Select "Options" "Call" .
The teleph one*mak esthe call. Th e
COMA NDdisplay sh owstelepho ne
mod e.
i To do this,COMA ND must be equipped with
a te leph one* and thetext message func tion*.
The mobile phone must be inserted into the
bracket .Text mes sage functio nsare not sup-
ported by all mobile phones.
6 Displ aythe deta ilsabout anentry and
hig hlight the telephone num ber data
fiel d (
=page 189).
6 Press nands elect "Write SMS" .
or 6 Select "Options" "Write SM S".
6 Enter the text of the message
( = page 127). i
To do this, COMA NDmust be equipped with
a na viga tion system*.
6 Search for an addr essbo ok ent ry
( = page 187).
6 Displ aythe deta ilsa bout anentry and
highl ight the address data field
(= page 189).
6 Press n.
i Pressi ngn only works if the address data
fi eld contains complete dat a.
Su bseq uent op eration wi llde pe nd on how
co mplete the address data item sare and
whether th eyagree with the da tain the
digital mapint he na vigation syste m.They
do not correspond, fore xamp le, if they are
not writte nin th e sa meway asthe desti na-
tion entry.
Ad dres sdata comp leteand matche s the
digital map data
Th ena viga tion syst embegin srout eca lcu-
latio naf ter yo uselect "Navigate". Add
ress data inc omplete or does not corr
espo nd with the digital map data
i The navigation system can only perform the
route calculation process when theco unt ry,the
to wn or pos tcode, the road na meand, if appro-
priat e,theho use number are entered correc tly.
The entries forthe town and road nam emustbe
ident ical with th e destination entry.
Th eco un try ca nbe written asfollow s:
! Inthe language of theco untry concerned
! In th elan guagese tas thesys tem language
! Asan int erna tional coun tryco de for vehicles
(e.g. Dfor Germ any,Efor Spain, Ffor
Fr an ce,I for Italy ,et c.)
Af ter"N avigat e"is selec ted, ame ssage
appears st ating th atthe address is inco m-
ple te.
6 Toclose the message: select "OK".
De pend ing on wh ichdata ismissin gor
does not correspond wit hthe digita lma p
data, youmu stnow:
! select aco un try
! enter atown
! enter a road
! enter aho usen um ber Wr
itin ga text message toan entry St
arti ngrout eg uidan cetoan entry 216_R
E_2006-12a.book Seit e192 Montag, 2. Oktob er2006 12:06 12

196 COM
AND
CO MA ND system settings Sw
itch ingthe disp layon oroff
6 Toswitch off:select "Vehicle" "Dis-
play off" .
6 Toswitchback on:turn ym z,sl ide
q m r,sl ide om por press n. Setting
day/ nigh tde sign
6 Select "Vehicle" "System settings"
 "Display" .
6 Select "Day design" or"Night de sign" or
"Au tom atic" .
i Inthe"A utomatic" set ting, COMA ND analy-
ses theautoma tic vehicl elig ht senso r and
sw itche sbet ween thed isplay de sign sau tomati-
ca lly. Setting
thetime
i Theco rrec t time must be setfor the follow-
ing naviga tion sys tem* func tions tooperate cor-
rec tly:
! Route guidanc eon rou tesw ith ti me -depend-
en t tr affic gu idance
! Calcul atio nof expec tedtime ofarrival
6 Select "Veh icle" "System settings"
 "Time" "Tim e".
6 Toselect hour orminute( s):slide
o m p.
6 Tosetthe value: turnym zor slide
q m r.
6 Tostore the setting: pressn. i
Theincrement value for se tting the mi nutes
depends on the situation. Itis 30 minute sif yo ur
vehicle is equipped wit ha navigation sys tem*
and GPS re ception isavailable. It is oneminut eif
th ere is no GPS signal or if your ve hicle is not
eq uipped with a navigation system*. CO
MAND syst emsettin gs System
ssetting menu overview Display Time Te
xt read er Ling
ua-
tron ic* Language Favour
ites Services* Res
et Display design Time
settings Text re
ader
settings Li
ng uatr onic*
settings La
ng uage
settings As
sign
programm able
button Bl
ue tooth*
se ttings Res
et
COM AND
to factory
se ttings Display design Time
settings 216_R
E_2006-12a.book Seit e196 Montag, 2. Oktob er2006 12:06 12

199
COM
AND
COMAND system settings
6 Select "Yes"or "No".
If yo us elect "No", th evoi cetra inin g wi ll
be cancelled. Thedata from the first
part is stored autom atical ly.
If you se lect "Ye s",the seco ndpart will
be gin.
Vo icet raining is co mpleted atthe end of
th e seco ndpart. Youwillsee a messa ge to
th is effect. Thedata from the se cond pa rt
is sto redau tomat ical ly.
Exit ing du ring thefirs tor second part of
vo ice training
6 Select "Cancel" .
A pr om pt appears as king wh ether you
re ally do wish to exit.
6 Select "Yes"or "No".
If you se lect "Ye s",th evoi ce trainin g
wi llbe canc elled. The data from the
part atwh ich yo ue xite d is notstor ed.
If yo us elect "No", thepart atwh ichyo u
st opped begi nsagain. De
leting ex isting vo icet rainin gdata
6 Select "Vehicle" "Sys tem settings"
 "Ling uatron ic" "Delete individ uali-
sation" .
A prompt appe arsasking whet her you
re ally do wish todelete.
6 Select "Yes"or"No".
Th e voice tr aini ng data will eithe rbe
de lete dor no t, depend ing onyour se-
lect ion.
6 Select "Vehicle" "Sys tem settings"
 "Language" .
Th e la nguage list appears. TheRdot
in dicates thecu rre ntsetting.
6 Tocha nge the settin g:select thede-
si red langu age.
Th e la nguage is set. 1
Prog rammable bu tton
Yo uca nassi gn the following predefined
fu nctions to the Pprog ramma bleb ut-
ton:
! "Rearwind ow blind" *
Yo uca nuse the programmab lebu tton
to extend or ret ract the re arwindow
blind.
! "Display off"
Yo uca nuse the programmab lebu tton
to sw itch the CO MAND disp lay on or
off. Se
tting the system language Assigning
thepr og ramm ablebu tton
(fav ourites)
P68.20-3558-31 216_R
E_2006-12a.book Seit e199 Montag, 2. Oktob er2006 12:06 12

200 COM
AND
CO MA ND system settings
! "Tow-away protection" *
Yo uca nuse theprogram mable button
to prime or de activate tow-a waypr o-
te ction*.
! "Interior motion sensor" *
Yo uca nuse theprogram mable button
to prime or de activate the interior mo-
tion sensor*.
! "Tow-away protection /inte rior motion
sensor" *
Yo uca nuse theprogram mable button
to prime or de activate tow-a waypr o-
te ction an d the interior motion sensor.
! "Repeat na viga tion comman d"*
Yo uca nuse theprogram mable button
to re call the last recom mendation of
the nav igation system*.
6 Select "Vehicle" "System settings"
 "Favou rite" .
Th elist ofpredefin edfunc tio ns ap-
pe ars. The Rdot in front of the list en-
try ind icat es the cu rrent setting.
6 Tochange the setting: turnymz and
se lect thedesir edfuncti on.
6 Tostor ethe setting and exit the
me nu: press n. Ge
neral informa tionab ou tBl ue tooth
Bl uetooth technology is th estand ardfo r
sh ort-ra ngewi reless data tra nsmi ssio nof
up to approxim ately10 metres. Bluetooth
ca n be used to ex changevCards or make
calls using a headsetor hand set,for exam-
ple. Sw
itching Blu etooth on oroff
6 Select "Veh icle" "System settings"
 "Se rvice s"  "Deactivat e
Blu etooth" .
You have switch ed Blue tooth on or off.
A tick appears when Blue tooth is
switc hedof f. Con
necti ng Blueto othde vic es
i Toconne ctaBl uet oot hde vice, theBl ue-
to othfu nc tion mu stbe switch ed on inCOMA ND
and in thed evice concerned. Th eBluetoot hde-
vi ce must also be "visible" to COMAND in order
for COMA ND to fi ndand display it.Fo rthe set-
ti ng procedures ,please see theo perating in-
stru ctions forth eBl ue toothdev ice. It
is po ssible toestablish aBlueto othco n-
nectio n betwe enCOMAND and the fol low-
ing types of devic e:
! Mobile ph one(only fo rtra nsferri ng
vCards)
! Handset
! Headset
! Lapto p/PDA
Yo uca nco nne ctup to twe lve device sto
COMA ND.
Th e connection proce ss in cludes search-
ing for the devic ean d its sub sequ ent au-
thori sation.
Calling upthe Blue too thdevic elist and se
arch ingfor devic es
6 Tocallup the li st:select "Vehicle"
"Syste m settings" "Service s" 
"S ea rch for Blu etooth devic es".
Wh enyou call upthe list for the first
ti me aft ersw itching on COMA ND, the
sear chfor de vice sint he rec eption
range st arts au tom atical ly. You will see
a di sp lay to this effe ct.
Th edev ice listappears af ter a short
whi le. Blu
etooth* settin gs 216_R
E_2006-12a.book Seit e200 Montag, 2. Oktob er2006 12:06 12

201
COM
AND
COMAND system settings
6 Tocancel the search: select "Can-
ce l".
The secon dtime yo ucall upthe list , and
su bsequently, th edevi celist appears im-
med iate ly ifCO MA ND has not been
swi tche do ff and on again inthemeant ime.
6 Tostart the search ma nually:select
"Update" .
The device listcan contain the fol lowing
de vice s:
! All devic esdet ected, wh ethe rau thor-
ised or not.
! Allauthorised devi ces,wh ethe r det ect-
ed or not. 1
Authori sedan dde tected devic e,devi ce
an d padlock icon are th esam eco lour
2 Device which was not detected, but
wh ich ha sbeena utho rise d in the past,
de vic ea nd padlock icon aredifferen t
col ours(the device may beswi tched
of for not beintheve hicle, fo rexamp le)
3 Newly detect eddevice, not yet autho r-
ised (noicon)
i Ifth e de vice list already contains twelv eau-
th ori sed device s, yo umustre vo ke authorisat ion
for one of the au thori sed devic es.Then youmu st
swit chthis devic eoffand then restart the
search .Any newde vice s for which you wish to
searc hwill not othe rwise appear in thelist. Display
ingdetails abo uta Bl uetooth device
6
Call up the Blue tooth device list
(= page 200).
6 Sele ctthede sired de vice.
6 Select "Details" .
Th edetai led di splay for th isdevic eap-
pe ars.
6 Toclos e the det ailed di sp lay: turn
y mz orslide qm r. Authorising
aBluetooth device
6 Call up the Blue tooth device list
(= page 200).
6 Select the una uthori seddevice.
6 Select "Authorise" .
Th einput menufor the acce ss nu mber
ap pears.
i The ac cess numb er is an yone tosix-dig it
nu mb er which youca nset you rself .Yo umu sten-
te rth e same numb erinCOMA ND and also in the
de vice tobe author ised .
P8
2.86-5068 -31 216_R
E_2006-12a.book Seit e201 Montag, 2. Oktob er2006 12:06 12

202 COM
AND
CO MA ND system settings i
Ondevic eswhich do notha ve an input key-
pad (e.g. headse ts),th e access nu mberis prede-
te rm ined .In this ca se,it is not nec essary to
ent erthe number on thedevic eitself .You will
usually fi ndthea cce ss number in the opera ting
in struc tion sfor the dev ice.
6 To enter the ac cess num berinto
COMAN D:select th efo ur digit sone by
one.
6 Tocanc elthe entry into COMA ND:
se lect "Back" .
6 Toconfirm the entry into COMA ND:
se lect ? .
6 Ifne cessary ,enter the sa meaccess
num berin to the Bluetoot hde vice
( = the operat ing in structi onsfor the
devic e).
Th ede vice is auth orised. Re
vokin gauthorisati onfor a Blu etoo th de
vice
6 Callup theBlue toothde vice li st
( = page 200).
6 Select th eau thori sedd evice.
6 Select "De-authorise" .
A pro mptappears asking wh ether you
really wish to re voke auth orisat ion for
thi sdevi ce.
6 Select "Ye s"or "No" .
If yo uselect "Yes", the authori sation for
the devi cewill berevoked.
i Ifyo u revok eaut horisatio nfor a device
whic hha s bee nau thorised in thep astand which
is not det ected in thes earch, this de vice will no
longer be display edinthe devic elist.
De vice s whic h havebeen aut horised in the past
bu twhic hare not det ectedi nth ese arc hare ei-
th er not switch ed on or notin the vehicle. i
Youcanr eset COMA ND back toits factory
set ting s. This will dele teall per sonal data (e.g.
address book entri es,entries in the destin ation
memo ry and in thelist of previ ous destinatio nsin
th e navigat ionsystem).
6 Select "Vehicle" "System setting s"
 "Reset".
A pro mptappear sas king wh ether you
really wish to res et.
6 Select "Yes"or"No" .
If yo uselect "Yes", another prompt wi ll
appear asking wheth eryou really do
wis hto reset.
6 Select "Yes"or"No" .
If yo use lect "Yes", COMAND will be re-
se tan dr estarted. Reset216_
RE_2006-12a.book Seit e202 Montag, 2. Oktob er2006 12:06 12

216 COM
AND
CO MA ND seat adjustm ent
i Thecomp onent sand operating principles of
COMA NDcanbe foun d on (
=page 59).
Th elumbar supp ort in the backrest of the
fr ont seats can be adjuste dto provide op-
ti mum suppor tfor your back.
6 Press theO button.
Th emain area ofthe COMAN Ddispl ay
is ac tive .A sc ale appea rs.
6 To mov eto the lo wermenu li ne:
sl ide qm r
6 Toselect the seat: slide om por turn
y m z.
6 Toconfirm the selec tion: press n. i
When you press theO functionbut ton,
th e previousl ysetseat is active.
6 To adj ust the lumbar support: slide
o m por turn ym zun til the desired set-
ting isreac hed.
6 Toconfirm the select ion: press n.
i Thecomp onent sand operating principles of
COMAND canbe foun d on (= page 59).
Th eco ntour of the front seat back rests
ca nb eindi vidually adjusted to provide op-
tim um su pportfo r yo urback.T hisis
ac hiev edbycontro lling thepre ssu reinthe
air cha mbersin themulti -contour seat.
Th ead jus tment sar emad eusin gth e
COMA NDdisplay.
i When you adj ustthe mu lti-contour seat ,you
ma yhe ar theairbe ing pu mped in or relea sed.
Yo u ca nad just thefo llowing aircu shions:
! Seat cushion side bolsters
! Backrest side cushions
! Back restcurvat ur ein thelum barre-
gion
! Backrest curvature intheupp erback
region 6
Make sure the key isin position 2in the
ign itio n lock.
6 Press theO button. Sel
ecting the seat
Yo u mus tfirst select the seat forwh ich yo u
wi sh tomak ead justme nts.
6 Press theO button.
Th emain area is activ e.
6 To move to the lo wer me nu line:
slide qm r. COMA
ND seat adjustment Lumbar support
P82.86-5022-31 Multi-c
ontour seat*
P82.86-5637-31216_R
E_2006-12a.book Seit e216 Montag, 2. Oktob er2006 12:06 12