clock MERCEDES-BENZ CL600 2006 C215 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2006, Model line: CL600, Model: MERCEDES-BENZ CL600 2006 C215Pages: 456
Page 5 of 456
ContentsSafety and Security........................... 61
Occupant safety................................... 62
Air bags .......................................... 63
Seat belts ....................................... 68
Children in the vehicle .................... 72
Blocking of rear side windows
operation ........................................ 78
Panic alarm .......................................... 79
Activating ....................................... 79
Deactivating ................................... 79
Driving safety systems ......................... 80
ABS ................................................ 80
BAS ................................................ 81
ESP
®............................................... 82
Anti-theft systems................................ 85
Immobilizer..................................... 85
Anti-theft alarm system .................. 85
Tow-away alarm ............................. 87
Controls in detail............................... 89
Locking and unlocking ......................... 90
SmartKey ....................................... 90
SmartKey with KEYLESS-GO* ........ 94
Opening the doors from the
inside ........................................... 100
Opening the trunk ........................ 101
Closing the trunk.......................... 103
Trunk emergency release ............. 109
Power closing assist for doors
and trunk lid ................................. 110
Automatic central locking ............ 110
Locking and unlocking from
the inside ..................................... 111
Seats ................................................. 112
Easy-entry/exit feature ................ 112
Removing and installing front
seat head restraints ..................... 114
Rear seat head restraints ............. 115
Lumbar support............................ 117
Multicontour seats* ..................... 117
Seat heating ................................. 119
Seat ventilation* .......................... 121Memory function ............................... 122
Storing positions into memory ..... 123
Recalling positions from memory. 123
Storing exterior rear view
mirror parking position ................ 124
Lighting ............................................. 125
Exterior lamp switch .................... 125
Combination switch ..................... 129
Hazard warning flasher ................ 130
Interior lighting ............................ 131
Courtesy lighting .......................... 133
Door entry lamps ......................... 133
Trunk lighting ............................... 133
Instrument cluster ............................. 134
Instrument cluster illumination .... 134
Coolant temperature gauge ......... 135
Trip odometer .............................. 135
Tachometer.................................. 136
Outside temperature indicator ..... 136
Clock............................................ 136
Page 26 of 456
25 At a glance
Instrument cluster
Item
Page
1
Coolant temperature gauge
135
2
Fuel gauge with fuel tank
reserve warning lamp
331
3
LLeft turn signal
indicator lamp
53
KRight turn signal
indicator lamp
53
4
Speedometer with:vElectronic Stability
Program (ESP
®)
warning lamp
333
lDistance warning
lamp
Vehicles without Distronic*:
Warning lamp without func-
tion. It illuminates when the
ignition is on. It should go out
when the engine is running.
332
5
Tachometer
136
Item
Page
6
Right display with:
AHigh beam headlamp
indicator lamp
52
-Antilock Brake
System (ABS)
indicator lamp
328
7
JReset button
134
8
Display with:
Gear selector lever
position
166
Program mode
166
Digital clock
(see COMAND operating
instructions)
9
Multifunction display with:
Trip odometer
137
Main odometer
137
Item
Page
a
Outside temperature
indicator
136
b
Left display with:1Supplemental
Restraint System
(SRS) indicator lamp
335
;Brake warning lamp,
USA only
329
3Brake warning lamp,
Canada only
329
?Engine malfunction in-
dicator lamp,
USA only
330
±Engine malfunction in-
dicator lamp, Canada
only
330
HTire inflation pressure
warning lamp
334
c
Knob for instrument cluster il-
lumination
134
Page 135 of 456
134 Controls in detailInstrument clusterA full view illustration of the instrument
cluster can be found in the “At a glance”
section of this manual (
page 24).
1Reset buttonJ
The instrument cluster is activated when
you:
open a door
switch on the ignition (
page 34)
press reset buttonJ1
switch on the exterior lamps
You can change the instrument cluster set-
tings in the instrument cluster submenu of
the control system (
page 157).
Instrument cluster illumination
1Knob for adjusting instrument cluster
illumination
Use knob1 to adjust the illumination
brightness for the instrument cluster.
Press knob1.
The knob will pop out.
To brighten illumination
Turn knob1 in the instrument cluster
clockwise.
The instrument cluster illumination will
brighten.
To dim illumination
Turn knob1 in the instrument cluster
counterclockwise.
The instrument cluster illumination will
dim.
iThe instrument cluster illumination is
dimmed or brightened automatically to
suit ambient light conditions.
The instrument cluster illumination will
also be adjusted automatically when
you switch on the vehicle’s exterior
lamps.
Page 137 of 456
136 Controls in detailInstrument clusterTachometer
The red marking on the tachometer de-
notes excessive engine speed.
To help protect the engine, the fuel supply
is interrupted if the engine is operated
within the red marking.
CL 55 AMG and CL 65 AMG
The tachometer of the CL 55 AMG and
CL 65 AMG does not have a red marking
denoting excessive engine speed.
To help protect the engine, the fuel supply
is interrupted if the engine is operated at
an excessive engine speed.
Outside temperature indicator
The outside temperature is displayed in
the instrument cluster (
page 24). For in-
formation on how to select the unit of the
displayed temperature, i.e. degrees
Celsius (°C) or degrees Fahrenheit (°F),
see “Selecting temperature display mode”
(
page 157).
The temperature sensor is located in the
front bumper area. Due to its location, the
sensor can be affected by road or engine
heat during idling or slow driving. There-
fore, the accuracy of the displayed temper-ature can only be verified by comparison to
a thermometer placed next to the sensor,
not by comparison to external displays
(e.g. bank signs, etc.).
When moving the vehicle into colder ambi-
ent temperatures (e.g. when leaving your
garage), you will notice a delay before the
lower temperature is displayed.
A delay also occurs when ambient temper-
atures rise. This prevents inaccurate tem-
perature indications caused by heat
radiated from the engine during idling or
slow driving.
Clock
The time is indicated in the instrument
cluster in the tachometer display.
You can adjust the clock using the
COMAND system. Refer to separate
COMAND operating instructions.
!Avoid driving at excessive engine
speeds, as it may result in serious en-
gine damage that is not covered by the
Mercedes-Benz Limited Warranty.
Warning!
G
The outside temperature indicator is not de-
signed to serve as an ice-warning device and
is therefore unsuitable for that purpose.
Indicated temperatures just above the freez-
ing point do not guarantee that the road sur-
face is free of ice. The road may still be icy,
especially in wooded areas or on bridges.
Page 272 of 456
271 Operation
At the gas station
Replace fuel cap by turning it clockwise
until it audibly engages.
Close the fuel filler flap.
Check regularly and before a long trip
1Windshield washer and headlamp
cleaning system
2Brake fluid
3Coolant level
Warning!
G
Overfilling of the fuel tank may create pres-
sure in the system which could cause a gas
discharge. This could cause the gas to spray
back out when removing the fuel pump noz-
zle, which could cause personal injury.
iOnly use premium unleaded gasoline
with a minimum Posted Octane Rating
of 91 (average of 96 RON/86 MON).
Information on gasoline quality can
normally be found on the fuel pump.
More information on gasoline can be
found in the Factory Approved Service
Products pamphlet.iLeaving the engine running and the fuel
cap open can cause the yellow engine
malfunction indicator lamp ?
(USA only),
±
(Canada only)
to illuminate.
For more information, see “Practical
hints” (
page 331).
iOpening the hood, see (
page 273).
Page 371 of 456
370 Practical hintsWhere will I find ...?Vehicle jack, vehicle tool kit, luggage bowl, spare wheel
The spare wheel, the vehicle tool kit and
the luggage bowl are stored in the com-
partment underneath the trunk floor.
1Vehicle jack
2Vehicle tool kit
3Luggage bowl
4Spare wheel
Lift up trunk floor cover and engage
trunk floor handle in upper edge of
trunk.
You can now remove the tools and ac-
cessories.The vehicle tool kit includes:
One interchangeable slot/Phillips
screwdriver
One towing eye bolt
One wheel bolt wrench with socket
wrench
One alignment bolt
One pair of gloves
One fuse extractor
One fuse chart for the main fuse box
Spare fusesVehicle jack
To prepare the vehicle jack for use
Remove the vehicle jack from the spare
wheel well under the trunk floor.
Push the crank handle up.
Turn the crank handle clockwise until it
engages (operational position).
!To prevent damage, always disengage
trunk floor handle from trunk edge and
lower trunk floor before closing the
trunk.
Page 372 of 456
371 Practical hints
Where will I find ...?
Storing the vehicle jack in the trunk
Retract the vehicle jack arm to the
base of the vehicle jack.
Push the crank handle up.
Turn the crank handle counterclock-
wise to the end of the stop (storage po-
sition).Spare wheel
Removing the spare wheel
Take out vehicle tool kit tray 2.
Turn the luggage bowl 3 counter-
clockwise.
Remove the spare wheel 4.
Storing the spare wheel
Place spare wheel 4 in wheel well and
secure it with luggage bowl 3.
Turn the luggage bowl 3 clockwise to
its stop.
Place vehicle tool kit tray 2 in luggage
bowl 3.
Warning!
G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on level surface. Make sure the jack arm is
fully seated in the jack take-up bracket. Al-
ways lower the vehicle onto sufficient ca-
pacity jackstands before working under the
vehicle.
Page 373 of 456
372 Practical hintsUnlocking/locking in an emergencyUnlocking the vehicle
If you are unable to unlock the vehicle with
the SmartKey or KEYLESS-GO*, open the
driver’s door and the trunk using the me-
chanical key. Removing the mechanical key
1Mechanical key locking tab
2Mechanical key
Move locking tab1 in the direction of
arrow.
Slide the mechanical key2 out of the
housing.Unlocking the driver’s door
1Unlocking
Insert the mechanical key into the driv-
er’s door lock until it stops.
Turn the mechanical key counterclock-
wise to position1.
The driver’s door is unlocked.
iUnlocking and opening the driver’s
door and/or the trunk with the me-
chanical key will trigger the anti-theft
alarm system.
To cancel the alarm, insert the
SmartKey or SmartKey with
KEYLESS-GO* in the starter switch.
Page 374 of 456
373 Practical hints
Unlocking/locking in an emergency
Unlocking the trunk
A minimum height clearance of 6.3 ft
(1.90 m) is required to open the trunk lid.
The trunk lid lock is located next to the
handle above the rear license plate recess.
1Unlocking and opening
2Trunk lid lock
Insert the mechanical key into the
trunk lid lock until it stops.
Turn the mechanical key counterclock-
wise to position1.
The trunk opens.
Turn the mechanical key back and re-
move it from the trunk lid lock.
Locking the vehicle
If you cannot lock the vehicle with the
SmartKey or the SmartKey with
KEYLESS-GO*, do the following:
Close the passenger door and the
trunk.
Press the central locking switch in the
center console (
page 111).
Check to see whether the locking knob
on the passenger door has moved
down.
If necessary, push it down manually.
Except for the driver’s door, the vehicle
should now be locked.
1Locking
Remove the mechanical key out of the
SmartKey (
page 372).
Insert the mechanical key into the driv-
er’s door lock until it stops.
Turn the mechanical key clockwise to
position1.
The driver’s door is locked.
!The trunk lid swings open upwards au-
tomatically. Always make sure that
there is sufficient overhead clearance.
Page 376 of 456
375 Practical hints
Opening/closing in an emergency
Opening/closing in an emergency
Tilt/sliding sunroof
You can open or close the tilt/sliding sun-
roof manually should an electrical malfunc-
tion occur.
The tilt/sliding sunroof drive is located be-
hind the lens of the interior overhead light.
1Lens
Pry off lens1 using a flat blade screw-
driver (
page 370).
Switch on the ignition (
page 34).
Take the crank from the operator’s
manual pouch.
2Crank
Insert crank2 through hole.
Turn crank2 clockwise to:
slide sunroof closed
raise roof at the rear
Turn crank2 counterclockwise to:
slide sunroof open
lower roof at the rear
iTurn crank2 slowly and smoothly.
The tilt/sliding sunroof must be syn-
chronized after being operated manual-
ly (
page 204).