navigation MERCEDES-BENZ CL600 2008 C216 Owner's Manual

Contents
Setting the language and
audio format ................................ 135
Subtitles and camera angles ........ 136
Interactive content ....................... 136
COMAND telephone* ........................ 137
Safety precautions ....................... 137
General notes............................... 137
Switching telephone on or off ...... 139
Activating telephone mode .......... 140
Telephone keypad ........................ 140
“911” emergency call................... 141
Entering the PIN ........................... 142
Entering the PIN2 ......................... 143
Entering the PUK/PUK2............... 143
Entering the unlock code ............. 143
Telephone submenu overview ...... 144
Main telephone menu .................. 145
Mailbox ........................................ 145
Call lists ....................................... 146
Incoming call ................................ 148
Making an outgoing call ............... 149
Functions during a single-call
connection ................................... 151
Transferring a call ........................ 153
COMAND phone book .................. 154
COMAND address book ............... 163Bluetooth
® settings....................... 176
SMS messages
(Short Message Service) ............... 178
COMAND navigation ........................... 182
Safety precautions ........................ 182
COMAND navigation (introduction) .... 183
Map software ................................ 183
Updating the map software........... 183
Updating process .......................... 183
Loading a DVD into the
DVD changer................................. 184
Updating ....................................... 185
General notes ............................... 187
Input restrictions .......................... 188
Navigation system
menu overview.............................. 189
Calling up the map display and
switching to navigation mode ....... 190
Basic settings ............................... 193
COMAND navigation system
(entering a destination) ...................... 198
Entering a destination
by the address .............................. 198
Entering a destination from the
destination memory ...................... 219Entering a destination from the
list of last destinations.................. 221
Entering a destination
from the map ................................ 221
Entering a stopover....................... 222
COMAND navigation system
(Point of interest entry) ...................... 225
Entering a POI in the
surrounding area .......................... 225
Entering a POI in the
surroundings of a given city .......... 225
Entering a POI in
a different region .......................... 225
Designating a POI category........... 226
Entering a POI from the map ........ 232
COMAND navigation system
(route guidance) ................................. 233
Route guidance ............................. 233
Examples of displays and
announcements for
a driving maneuver ....................... 233
Example of a display
without driving maneuvers............ 235
Destination or
destination area reached .............. 235
Partially digitized areas ................. 236

Contents
Off-road and off-map .................... 237
Navigation announcements .......... 239
COMAND navigation system
(during route guidance)...................... 240
Cancel route guidance ................. 240
Continuing cancelled
route guidance ............................. 240
Route browser .............................. 240
Displaying info .............................. 241
Displaying route information ........ 242
Detour function ............................ 242
COMAND navigation system
(real-time traffic) ................................ 244
Real-time traffic notifications
in the map .................................... 244
Displaying real-time
traffic reports ............................... 245
Example message ........................ 246
COMAND navigation system
(destination memory) ......................... 247
Saving a destination in the
destination memory ..................... 247
Deleting a destination from the
destination memory ..................... 249
Own address ................................ 250COMAND navigation system
(last destinations) .............................. 254
Saving a destination permanently
in the destination memory ........... 254
Saving the vehicle position in the
list of last destinations ................. 254
Saving the crosshair position in
the list of last destinations ........... 254
Deleting one of the
last destinations........................... 254
COMAND system settings ................. 255
Systems settings menu overview . 255
Display settings............................ 255
Time settings................................ 255
Voice Control settings .................. 257
Setting the system language ........ 258
Assigning the favorite button ....... 259
Reset............................................ 259
COMAND vehicle menu ..................... 260
Setting night security illumination 260
Locator lighting on/off ................. 261
Exterior mirror
convenience settings ................... 262
Automatic locking on/off ............. 263
Activating easy-entry/exit feature 264
Setting interior ambient lighting... 265Setting interior lighting delayed
switch-off ..................................... 266
Extending or retracting
rear window sunshade ................. 267
Trunk opening-height
restriction* on/off ....................... 268
COMAND automatic climate control . 269
Setting temperature ..................... 270
Adjusting air distribution .............. 271
Adjusting air volume .................... 271
Central climate control menu
via COMAND ................................ 272
COMAND seats ................................. 276
Operating seats via COMAND ...... 276
Lumbar support (CL 550) ............. 277
Drive-dynamic
multicontour seats* ..................... 278
Instrument cluster control system..... 282
Multifunction display.................... 282
Multifunction steering wheel........ 283
Menus .......................................... 284
Trip menu ..................................... 286
Navi menu .................................... 287
Audio menu.................................. 289
AMG menu ................................... 291
Telephone menu* ........................ 294

Contents
Assistance menu* ........................ 298
Service menu ............................... 299
Settings menu .............................. 301
Voice Control..................................... 303
Operating safety........................... 303
Voice Control introduction................. 304
Spelling ........................................ 305
Command types ........................... 305
Active System .............................. 305
Controls ....................................... 306
Symbols ....................................... 307
Voice Control telephone .................... 308
Telephone operation .................... 308
Telephone commands .................. 309
Voice Control navigation.................... 315
Important notes ........................... 315
Navigation operation .................... 316
Navigation commands.................. 316
Dialog for entering a
complete address ........................ 317
Commands for entering parts of
an address ................................... 322
Voice Control address book .............. 325
COMAND address book overview 325Operation with address book
not open (global) ........................... 325
Operation with address book
open (local) ................................... 326
Operating and using address book 326
Available commands with the
address book not open ................. 326
Available commands with the
address book open ....................... 328
Voice Control radio............................. 329
Radio operation ............................ 329
Radio commands .......................... 329
Voice Control CD/
DVD changer/MP3 ............................. 333
Operation ...................................... 333
Commands.................................... 334
Voice Control command list ............... 335
Command list................................ 335
Voice Control troubleshooting ............ 347
Help function ................................ 347
Help commands ............................ 347
Help window ................................. 347
Entering digits and spelling ........... 347
What to do if ... ............................. 348
Voice Control individualization ........... 350
Controls in detail............................. 351
Locking and unlocking ....................... 352
SmartKey ...................................... 352
SmartKey with KEYLESS-GO* ....... 356
Checking batteries in the
SmartKey or SmartKey with
KEYLESS-GO* ............................... 361
Loss of the SmartKey or
SmartKey with KEYLESS-GO* ....... 361
Opening doors from the inside ..... 362
Power closing assist for doors
and trunk lid ................................. 363
Automatic central locking ............. 363
Locking and unlocking
from the inside ............................. 364
Starter switch positions ..................... 365
SmartKey ...................................... 365
SmartKey with KEYLESS-GO* ....... 366
Seats .................................................. 368
Seat adjustment ........................... 368
Folding front seat backrest
forward ......................................... 371
Easy-entry/exit feature................. 373
Seat heating* ............................... 375

33 At a glance
Control systems
Item
Page
1
Lto cancel Voice
Control
back
306
283
2
$to scroll up
%to scroll down
&to scroll to the right
(to scroll to the left
#to confirm selection
3
Multifunction display
282
4
sto take a call
to dial
to redial
tto end a call
to reject an incoming
call
æto increase volume
çto decrease volume
Fto mute
148,
294
148,
297
Item
Page
5
!to activate Voice
Control
to accept a call
306
148
6
Instrument cluster
illumination
434
7
Swivel COMAND display
85
8
COMAND display illumination
85
9
COMAND display
84
a
CD/DVD changer
116
b
PCMCIA card slot
117
c
Favorite button
259
d
Rear head restraints retract
button
378
e
Program mode selector
switch for:

automatic transmission
shift program


suspension tuning of ABC
427
461
Item
Page
f
Shortcut button for:

CD/DVD


radio
120
99
g
Back button
92
h
Hazard warning flasher
397
j
Seat menu
276
k
Shortcut button for:

telephone*


navigation
137
190
l
COMAND on/off button
84
m
Volume control
94
n
Mute button
94
o
Telephone keypad
140
p
COMAND controller
86

81 Control systems
COMAND operating safety
COMAND introduction
COMAND FM/AM radio
COMAND satellite radio
COMAND
audio CD/audio DVD/MP3
COMAND AUX
COMAND video DVD
COMAND telephone*
COMAND navigation
COMAND system settings
COMAND vehicle menu
COMAND automatic climate control
COMAND seats
Instrument cluster control system
Voice Control

82 Control systemsCOMAND operating safetyWarning!
G
Any alteration of electronic components or
software can cause malfunctions.
Radio, satellite radio, amplifier, CD/DVD
changer, navigation module, telephone and
Voice Control systems* are interconnected.
Therefore, if one of the components is not
operational, or has not been removed/ re-
placed properly, the function of other com-
ponents could be impaired.
Such conditions might seriously impair the
operating safety of your vehicle.
We recommend to have any service work on
electronic components carried out by an au-
thorized Mercedes-Benz Center.
Warning!
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings while the vehicle is at a
standstill, and operate the system only
when permitted by road, weather and traffic
conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/ h), your car covers a
distance of 44 feet (approximately 14 m) ev-
ery second.
COMAND supplies you with information to
help you select your route more easily and
guide you conveniently and safely to your-
destination. For safety reasons, we encour-
age the driver to stop the vehicle in a safe
place before answering or placing a call, or
consulting the COMAND screen to read nav-
igational maps, instructions, or downloaded
information.
Warning!
G
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, especially
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. Their ob-
servance always remains in the driver’s per-
sonal responsibility. DVD maps do not cover
all areas nor all routes within an area.

83 Control systems
COMAND introduction
COMAND introduction
COMAND (C
ockpit M
anagement and D
ata
System) is an information and operating
center for vehicle sound and communica-
tions systems, including the radio and nav-
igation system, as well as other optional
equipment (satellite radio, telephone*,
etc.).
Availability of functions while the vehi-
cle is in motion
For safety reasons, certain COMAND func-
tions are not available while the vehicle is
in motion or they are only available to a
limited extent. You will notice this, for ex-
ample, by the fact that certain menu items
cannot be selected or that the COMAND
display shows a corresponding message.
Switching COMAND on or off
Press the o shortcut button in the
center console (
page 84).
COMAND calls up the menu last select-
ed.
COMAND components
In your vehicle, COMAND can be used to
operate:

audio functions


the navigation system


the telephone* and communication
functions (SMS*)


external audio and video sources


video DVD


various vehicle settings
COMAND consists of the following:


COMAND shortcut buttons


COMAND display


telephone* keypad


COMAND controller
i
When you switch off COMAND, you also
switch off the currently playing audio source.
During a telephone call, you cannot switch off
COMAND.

84 Control systemsCOMAND introductionCOMAND shortcut buttons
Use the COMAND shortcut buttons to se-
lect main functions directly.
Example:

Switching directly to Radio or CD
menu: Press M once or twice.COMAND display
In the COMAND display, you will find the
function currently selected and the corre-
sponding menus. The COMAND display is
divided into several areas.
1Status line
2Main functions
3Main area
4Submenus
5Climate control settings
A white bar under the main functions 2 in-
dicates the active area.
Once you have selected a main
function2, the main area 3 is active.
i
During Rear View Camera* operation
(
page 477) it is not possible to operate the
COMAND shortcut buttons.
Function
Page
1
PFavorite button
259
2
MShortcut button for:

CD/DVD


radio
120
99
3
LBack button
92
4
OSeat menu
276
5
NShortcut button for:

telephone*


navigation
137
190
6
oCOMAND on/off
button
83
7
,Volume control
94
8
FMute button
94

87 Control systems
COMAND introduction
Symbol
How to use the COMAND controller
Function
n

Press briefly.


Select menu item.


Exit full-screen image with Navi.

Press and hold until the selected ac-
tion has been carried out.


Save a station.


Accept a destination for navigation.
ymz

Rotate.


Move through vertical or horizontal menus.


Move through text.


Program settings.
qmr

Slide.


Move through vertical menus.


Exit horizontal menus.

Slide and hold.


Move through a navigation map.
omp

Slide.


Move through horizontal menus.


Exit vertical menus.

Slide and hold.


Fast forward or reverse for audio CD or audio DVD playback.


Move through a navigation map.
wmx

Slide and hold.


Move through a navigation map.

91 Control systems
COMAND introduction
Entering charactersIllustration: entering a navigation destina-
tionSelecting characters
Slide omp or rotate ymz.

Confirming selection: Press n.
COMAND completes your entry as
soon as it can be clearly identified. In
this case, you do not need to switch to
the list.
Deleting individual characters

Select and press ) repeatedly in the
bottom line.Deleting entire words or numbers

Press and hold ) in the bottom line
until the word or number is deleted.
Exiting character entry

Select and press “Back” in the bottom
line.
or

Press back button L in the center
console (
page 84).
Switching to the list

Slide qm.
or

Select and press ? in the second line
from the bottom.

Exiting list: Slide om to select “Back”.
Accepting first entry

Press nuntil you exit the character
entry window.Selecting list item
Illustration: list of cities for navigation1Symbol for other selection options
(e.g. county)
Selecting a line: Slide rmq or
rotateymz.

Confirming selection: Press n.
Additional selection options are avail-
able for list entries featuring
symbol1. For example, cities marked
with symbol 1 indicate that the select-
ed country has more than one city fea-
turing that name. Confirming such a list
entry opens up another submenu.