light MERCEDES-BENZ CLA 2018 Service Manual

Interior lighting control
General notes In order to preven tt he vehicle's battery from
discharging ,t he interio rl ighting function sa re
automatically deactivated after som et im e
except when th eS ma rtKey is in position H in
th ei gnition lock.
The color and brightness for th ea mbien tl ighting
may be set via th em ultimedia system; see th e
separat eo perating instructions.
Automati ci nterior lighting controlX
To switch on: set th es witch to center posi-
tion

X
Insert the new bul bi nto bul bh older D .X
Insert bul bh older D and turn it clockwise.X
Press on housing cover C and turn it to the
right. X
Replace the cover in the front wheel housing
( Y
page 105).
High-beam headlamps/daytime run-
ning lamps/parking lamps and stand-
ing lamps (halogen headlamps) X
Switch off the lights. X
Open the hood. X
Turn housing cover C counter-clockwise and
remove it. X
Turn bul bh older D counter-clockwise and
pul lo ut.X
Insert the new bul ba nd engage it to the stop.X
Press on housing cover C and turn it to the
right.
Turn signals (halogen headlamps)
X
Switch off the lights. X
Open the hood. X
Turn bul bh older C counter-clockwise and
pul lo ut. X
Turn the bul bc ounter-clockwise and pul li t
out of bul bh older C .X
Insert the new bul bi nto bul bh older C .X
Insert bul bh older C and turn it clockwise
until it engages.
Replacing rear bulbs
Openin ga nd closing the side trim pan-
els
View of right-hand side trim panel
You must open the side trim panel in the trunk
before you can replace the bulbs in the tail
lamps. X
To open: release right or left side trim
panel C at the top and fold it down in the
direction of the arrow. X
To close: insert side panel C .
Tail lamps X
Switch off the lights. X
Open the trunk. X
Open the side trim panel ( Y
page 106).106
Replacing bulbs
Lights and windshield wipers

Problems with the "Cooling with air dehumidification" function Problem
Possible causes/consequences and P Solutions
The indicator lamp in the
Z button flashes
three times or remains
off. The "Cooling with air
dehumidification" func-
tion cannot be switched
on. Cooling with air dehumidification has been deactivated due to am al-
function. X
Visit aq ualified specialist workshop.
Setting climate control to automatic
General notes The automatic climate control function is only
available in conjunction with dual-zone auto-
matic climate control.
In automatic mode, the set temperature is main-
tained automatically at ac onstant level. The
system automatically regulates the temperature
of the dispensed air, the airflow and the air dis-
tribution.
The "Cooling with air dehumidification" function
is activated automatically in automatic mode.
Setting climate control to automatic X
Turn the SmartKey to position 2 in the ignition
lock ( Y
page 122).X
Set the desired temperature. X
To activate: press the X button.
The indicator lamp in the X button lights
up. Automatic air distribution and airflow are
activated. X
To switch to manua lm ode: press the O
or J button.
or X
Press the

If the battery voltage is too low, the rear window
defroster may switch off.
Activating/deactivating X
Turn the SmartKey to position H in the igni-
tion lock ( Y
page 122). X
Press the l button.
The indicator lamp in the l button lights
up or goes out.
Problems with the rear window defroster Problem
Possible causes/consequences and P Solutions
The rear window
defroster has deactiva-
ted prematurely or can-
not be activated. The battery has not been sufficiently charged. X
Switch off any consumers that are not required, e.g. reading lamps,
interior lighting or the seat heating.
When the battery is sufficiently charged, the rear window defroster
can be activated again.
Switching air-recirculatio nm ode
on/off
General notes You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle from
outside. The air already inside the vehicle will
then be recirculated.
If you switch on air-recirculation mode, the win-
dows can fog up more quickly, in particular at
low temperatures. Only use air-recirculation
mode briefl ytop revent the window sf rom fog-
ging up.
The operation of air-recirculation mode is the
same for all control panels.
Activating/deactivating X
Turn the SmartKey to position H in the igni-
tion lock ( Y
page 122).X
To activate: press the

i If you activate the residual heat function at
high temperatures, only the ventilation wil lb e
activated. The blower runs at mediu ms peed.
i You cannot use the ventilation to cool the
vehicle interior to at emperature lowe rt han
the outsid et emperature.
Activating/deactivating X
Turn the SmartKey to position Z in the igni-
tion lock or remove it ( Y
page 122).X
Press the K button.
The indicator lamp in the K button lights
up or goes out.
The indicator lamp in the button indicates that
the respective function is activated.
i Residua lh eat is deactivated automatically:R
after approximately 30 minutes R
when the ignition is switched on R
if the battery voltage drops
Air vents
Important safety notes
G WARNING
Very hot or very cold air can flow from the air
vents. This could resul tinb urns or frostbite in
the immediate vicinity of the air vents. There
is ar isk of injury.
Make sure that all vehicle occupants always
maintain as ufficient distance to the air out-
lets. If necessary ,r edirect the airflow to
another area of the vehicle interior.
In order to ensure the direct flow of fresh air
through the air vents into the vehicle interior,
please observe the following notes: R
keep the air inlet between the windshield and
the hood free of blockages, such as ice, snow
or leaves. R
never cover the air vents or air intake grilles in
the vehicle interior.
i For optimal climate control in the vehicle,
open the air vents completely and set the
adjusters to the central position. Setting the air vents
C
Side window defroster vent D
Side air vent X
To open as ide air vent: turn the adjuster in
side air vent D to the left. X
To close as ide air vent: turn the adjuster in
side air vent D clockwise as far as it wil lg o.
i The center and rear air vents are adjusted in
the same way.120
Ai rv ents
Climate control

operates independently of the ECO start/stop
automatic engine switch-off function.
Key positions with the Start/Stop button
C
Start/Stop buttonD
Ignition lock
As soon as the ignition is switched on, all the
indicator lamps in the instrument cluster light
up.
For further information on situations in which an
indicator lamp either fails to go out after the
engine is started or lights up while driving,
please refer to "Warning and indicator lamps in
the instrument cluster" ( Y
page 219).
If Start/Stop button C has not yet been
pressed, this is the same as the SmartKey being
removed from the ignition. X
To switch on the power supply: press
Start/Stop button C once.
The power supply is switched on. You can now
activate the windshield wipers, for example.
The power supply is switched off again if: R
the driver's door is opened and R
you press Start/Stop button C twice when in
this position X
To switch on the ignition: press Start/Stop
button C twice.
The ignition is switched on.
If you press Start/Stop button C once when
in this position, the ignition is switched off
again.
Removing the Start/Stop button
You can remove the Start/Stop button from the
ignition lock and start the vehicle as normal
using the SmartKey.
You can only switch between Start/Stop button
mode and SmartKey operation when the vehicle
is stationary. You must also engage park position ] .X
Remove Start/Stop button C from ignition
lock D .
You do not have to remove the Start/Stop but-
ton from the ignition lock when you leave the
vehicle. You should, however, alway st ake the
SmartKey with you when leaving the vehicle. As
long as the SmartKey is in the vehicle: R
the vehicle can be started using the Start/
Stop button R
the electrically powered equipment can be
operated
Starting the engine
Important safety notes
G WARNING
If children are left unsupervised in the vehicle,
they could: R
open the doors, thus endangering other
people or road users. R
get out and disrupt traffic. R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they: R
release the parking brake. R
shifting the automatic transmission out of
park position P R
Start the engine.
There is ar isk of an accident and injury.
When leaving the vehicle, alway st ake the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
G WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is ar isk of fatal injury. Therefore never leave
the engine runnin gine nclosed spaces with-
out sufficient ventilation. Driving 123
Driving and parking Z

Deactivating or activating th eE CO
start/stop function X
To deactivate : press EC Ob utto n C .
Indicator lamp D goe so ut .X
To activate : press EC Ob utto n C .
Indicator lamp D lights up.
If indicator lamp D is off, th eE CO start/sto p
function has bee nd eactivated manually or as
th er esult of am alfunction .T he engin ew ill then
no tbes witched of fa utomatically when th ev ehi-
cl es to ps . AMG Performance exhaust syste m
(Mercedes-AMG vehicles )You can choos eb etween differen tA MG Per -
formanc ee xh aus ts ystem volume su sin gt he
position of th ee xh aus tf lap .
Each time you start th ee ng in ew it ht he Smart -
Key or th eS ta rt/Sto pb utton, th eq uietest set -
ting is activated.
Settin gt he volume : X
Press butto n C .
If you selec tt he loudest setting ,i nd icator
lamp D lights up.
Problem sw it ht he engin eProblem
Possible causes/consequences an d P Solutions
The engin ed oe sn ot
start . The HOLD function or Distanc eP ilo tD ISTR ONIC is activated.X
Deactivat et he HOLD function ( Y
page 157) or Distanc eP ilo t
DISTRONIC ( Y
page 155).X
Tr yt os ta rt th ee ng in ea gain .
The engin ed oe sn ot
start .T he starter moto r
can be heard. R
There is am alfunction in th ee ng in ee lectronics.R
There is am alfunction in th ef ue ls upply.
Before attemptin gtos ta rt th ee ng in ea gain :X
Tur nt he SmartKey bac ktop osition Z in th ei gnition lock.
or X
Press th eS ta rt/Sto pb utto nr epeatedly until all indicator lamp si n
th ei nstrument cluster go out .X
Tr yt os ta rt th ee ng in ea gain .A vo id excessivel yl on ga nd frequent
attempt stos ta rt th ee ng in east he se will drain th eb attery.
If th ee ng in ed oe sn ot start after severa la ttempts:X
Consult aq ualified specialis tw orkshop .Driving 127
Driving an dp ark in g Z

Problem
Possible causes/consequences and P Solutions
The engine does not
start. You cannot hear
the starter motor. The on-board voltage is too low because the battery is too weak or
discharged. X
Jump-start the vehicle ( Y
page 278).
If the engine does not start despite attempt stoj ump-start it:X
Consult aq ualified specialist workshop.
The starter motor was exposed to at hermal load that was too high.X
Allow the starter motor to cool down for approximately two minutes. X
Try to start the engine again.
If the engine still does not start: X
Consult aq ualified specialist workshop.
The engine is not running
smoothly and is misfir-
ing. There is am alfunction in the engine electronics or in am echanical
componen toft he engine management system.X
Only depress the accelerator pedal slightly.
Otherwise, non-combusted fuel may get into the catalytic converter
and damage it. X
Have the cause rectified immediately at aq ualified specialist work-
shop.
The coolant temperature
gauge shows av alue
above 248 ‡( 120 †).
The coolant warning
lamp may also be on and
aw arning tone may
sound. The coolant level is too low. The coolant is too hot and the engine is no
longer being cooled sufficiently. X
Stop as soon as possible and allow the engine and the coolant to
cool down. X
Check the coolant level ( Y
page 260). Observe the warning notes
as you do so and add coolant if necessary.
DYNAMIC SELEC Tb utton (all vehicles
except Mercedes-AMG vehicles) Use the DYNAMIC SELECT button to change the
drive program. Depending on the drive program
selected the following vehicle characteristics
will change: R
the drive (engine and transmission manage-
ment) R
the suspension (vehicles with damping sys-
tem or AMG adaptive sport suspension sys-
tem) R
the steering R
the availability of the ECO start/stop function R
the climate control:
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program C is
activated. For further information about starting
the engine, see ( Y
page 125). X
Press DYNAMIC SELECT button C as many
times as necessary until the desired drive
program is selected.
The selected drive program appears in the
multifunction display .A fter five seconds the
display goes out and the status icon of the
selected drive program appears.128
DYNAMIC SELECT button (all vehicles except Mercedes-AMG vehicles)
Driving and parking

In addition, the current drive program settings
are displaye db riefl yint he multimedia system
display.
i In af ew countries, the ECO start/stop func-
tion is deactivated at the factory due to the
available fuel grade .Int his case, the ECO
start/stop function is not available in any
drive program, regardless of the display in the
multimedia system display.
Available drive programs:
C Comfort Comfortable and economi-
cal driving characteristics
S Sport Sporty driving characteris-
tics
I Individual Individual settings
E Economy Particularly economical
driving characteristics
Additional information for drive programs
( Y
page 134).
You can also change gear yourself using the
steering wheel paddle shifters. For further infor-
mation on the manua ld rive program
( Y
page 136).
DYNAMIC SELECT controller
(Mercedes-AMG vehicles) Use the DYNAMIC SELECT controller to change
the drive program. Depending on the drive pro-
gram selected the following vehicle character-
istics wil lc hange:R
the drive R
the transmission management R
ESP ®
R
the suspension (vehicles with AMG adaptive
sport suspension system) R
the availability of the ECO start/stop function R
the availability of gliding mode
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program C is
activated. For further information abou ts tarting
the engine, see ( Y
page 125). X
Turn DYNAMIC SELECT controller C as many
times as necessary until the desire dd rive
program is selected.
The selected drive program appears in the
multifunction display. After five seconds the
display goes out and the status icon of the
selected drive program appears.
The drive program indicator on DYNAMIC
SELECT controller C lights up in red.
Available drive programs:
I Individual Individual settings
C Comfort Comfort-oriented, opti-
mum-economy engine and
transmission settings
S Sport Sporty engine and trans-
missio ns ettings
S+ Sport Plus Particularly sporty trans-
missio ns ettings
Race
Maximu ms portiness and
engine and transmission
settings suitable for the
racetrack
Additional information for drive programs
( Y
page 134).
You can also change gear yourself using the
steering wheel paddle shifters. For further infor-
mation on the manua ld rive program
( Y
page 136).DYNAMIC SELEC Tc on trolle r( Mercedes-AMG vehicles) 129
Driving and parking Z

the SmartKe yf ro mt he ignition, the automatic
transmission shifts to ] automatically.
With the Start/Sto pb utton: if yo ut he no pe n
the driver's door or the front-passenge rd oo r,
the automatic transmission shifts to ] auto-
matically.
If yo uw an tt he automatic transmission to
remai ninn eutral \\ ,e .g .w he nh av in gt he vehi-
cle cleane dinana ut omatic car wash with a
towing system: X
Vehicle sw it ht he Start-Sto pb utton:
remove the Start-Stop button fro mt he igni-
tio nl oc k.X
Insert the SmartKe yi nto the ignition lock.X
Al lv eh icles: switch the ignition on.X
Depres st he brake peda la nd kee pi t
depressed. X
Engage neutral \\ .X
Releas et he brake pedal.X
Releas et he electri cp ar king brake.X
Switch off the ignition and leav et he SmartKey
in the ignition lock.
Electric parking brake
General notes
G WARNING
If yo ul eave children unsupervised in the vehi-
cle ,t he yc ould se titinm otion by ,f or example:R
release the parking brake. R
shift the automatic transmission ou toft he
parking position P .R
start the engine.
In addition, the ym ay operate vehicl ee quip-
ment and become trapped .T here is ar is ko f
an accident and injury.
When leaving the vehicle, always take the
SmartKe yw it hy ou and lock the vehicle. Never
leav ec hildren unsupervised in the vehicle. The functio noft he electric parking brake is
dependent on the on-board voltage. If the on-
boar dv oltag eisl ow or there is am al functio ni n
the system, it ma yn ot be possibl etoa pply the
release dp ar king brake. X
If thi sist he case, onl yp ar kt he vehicl eo n
level ground and secur eittop revent it rolling
away. X
Shift the automatic transmission to position
] .
It ma yn ot be possibl etor elease an applied
parking brake if the on-board voltag eisl ow or
there is am al functio nint he system. Contact a
qualified specialis tw or kshop.
The electric parking brake performs af un ction
tes tatr egular intervals whil et he engine is
switched off .T he sound st ha tc an be he ar dw hile
thi siso ccurring ar en ormal.
Applyin gorr eleasing manually
X
To engage: push handle C .
When the electric parking brake is applied,
the red I (USA only) or $ (Canada
only) indicator lamp lights up in the instru-
ment cluster.
Th ee le ctric parking brake can also be applied
when the SmartKe yisr emoved.X
To release: pull handle C .
The red I (USA only) or $ (Canada
only) indicator lamp in the instrument cluster
goes out.
Th ee le ctric parking brake can onl yb e
released: R
if the SmartKe yisinp osit ion G or H in
the ignition lock ( Y
page 122 )o rR
if the ignition wa ss wi tched on using the
Start/Stop button142
Parking
Driving an dp arking