display MERCEDES-BENZ CLA COUPE 2021 Owner's Guide

Displa
Displa
ying v
ying vehicle data
ehicle data Multimedia system:
4 © 5
Info #
Select Vehicle.
The vehicle data is displ ayed. Displa
Displa
ying engine data
ying engine data Multimedia system:
4 © 5
Info #
Select Engine.
The engine data is displa yed.
% The actual (maximum) values that can be ach-
ie ve dfo r engine output and engine torque
may deviate from the certi/ed values within
th e count ry-speci/c guidelines for permissible
to lerances (basis: UN-ECE No. 85 or count ry-
speci/c guidelines).
In0uencing variables that can in0uence this
are, forex ample:
R Sea le vel
R Fuelqu ality R
Outside temp erature
R Operating temp erature of the engine
% The values displa yed ser veonly as orienta-
tion. The values for engine output and engine
to rque shown on the media display may devi-
ate from the actual values. Calling up t
Calling up t
he fuel consump
he fuel consump tion indicat
tion indicator
or Multimedia system:
4 © 5
Info #
Select Consumption.
The cur rent and average fuel consum ption is
displa yed. Manual tr
Manual tr
ansmission
ansmission Oper
Oper
ating t
ating t he
heg
gear
ear shiT
shiT lev
lever
er &
W
WARNING
ARNING Risk of accident and inju rydue
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c.
R operate vehicle equipment and become
trapped, forex ample.
In addition, thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unattended in the
ve hicle. Driving and parking
175
175

Use
the DIRECT SELECT le verto switch the trans-
mission position. The cur rent transmission posi-
tion is displa yed in the inst rument displa y. j
Park position
k Reversege ar
i Neutral
h Drive position Eng
Eng
aging rev
aging rever
erse g
se g ear R
ear R #
Depress the brake pedal and push the DIRECT
SELECT le ver upwards past the /r stpoint of
re sis tance.
Eng
Eng aging neutr
aging neutr al N
al N #
Dep ress the brake pedal and push the DIRECT
SELECT le ver up or down tothe /rst point of
re sis tance.
% ToshiT into neutral iwith theve hicle
switched on, push the selector le ver up or
down for se veral seconds tothe /rst point of
re sis tance.
Subsequently releasing the brake pedal will allow
yo uto mo vetheve hicle freel y,e.g. topush it or
to w it away.
Pr
Pr oceed as f
oceed as f ollow
ollow s if y
s if you w
ou w ant t
ant the aut
he aut omatic
omatic
tr
tr ansmission t
ansmission t o r
o remain in neutr
emain in neutr al
ali
i ev
even if t
en if t he
he
v
v ehicle is switc
ehicle is switc hed
hedo.
o.or t
or t he dr
he dr iv
iver's door is
er's door is
opened:
opened: #
Depress the brake pedal and engage neutral
i when the car is stationar y. #
Release the brake pedal. #
Switch o. theve hicle. %
Ifyo uth en exitth eve hicle leaving theke y in
th eve hicle, the automatic transmission
re mains in neut rali.
Eng
Eng aging par
aging par k position P
k position P #
Obser vethe no tes on parking theve hicle
(/ page 205). #
Depress the brake pedal until theve hicle
comes toa standstill. #
When theve hicle is at a standstill, press but-
to nj.
When the transmission position display sho ws
j ,th e park position is engaged. If no trans-
mission position display jappears, secure
th eve hicle toprev ent it from rolling away.
% Depending on the situation, it may take a
short time until jis engaged. Therefore,
alw ays pay attention tothe transmission posi-
tion displa y.
Pa rk position jis engaged automatically if one
of thefo llowing conditions is met:
R You switch the stationary vehicle o. in trans-
mission position hork. 178
178
Driving and parking

When
the automatic transmission is shiTed to
position h,you can manually shiT it with the
stee ring wheel gearshiT paddle. If permitted, the
automatic transmission shiTs toa higher or lo wer
ge ar depending on the steering wheel gearshiT
paddle being pulled.
Yo u ha vetwo options tomanually shiT the auto-
matic transmission:
R Temp orary setting
R Perm anent setting
The gears shiT automatically when manual shiTing
is deactivated.
T
T em em por
por ar
ary se
y se tting:
tting: #
T
To activ
o activ at
ate:
e: Pull steering wheel gearshiT pad-
dle 1 or2.
Manual shiTing is activated for a short time.
The transmission position display sho wsp
and the cur rent gear.
% How long the manual shiTing st ays activated
is dependant on various factors. Manual shiTing can be automatical
lydeactiva-
te d in thefo llowing cases:
R Changing the drive prog ram
R Restarting theve hicle
R When the transmission position his
engaged again
R Driving style #
T
T o
o shiT
shiT up:
up:Pull steering wheel gearshiT pad-
dle 2. #
T
T o
o shiT
shiT do
down:
wn: Pull steering wheel gearshiT
paddle 1.
If yo u pull and hold the steering wheel gear-
shiT paddle 1,the transmission shiTs tothe
lo we st possible gear. #
T
T o deactiv
o deactiv at
ate:
e: Pull steering wheel gearshiT
paddle 2and hold it in place.
The transmission position displ aysho wsh.
P
P er
er manent se
manent se tting:
tting: #
Change todrive prog ram =(/ page 173). #
Select drive setting p(/ page 174). Gear
Gear
shiT
shiT r
recommendation
ecommendation The
gearshiT recommendation assists you in
adopting an economical driving style. #
Ifth ege arshiT recommendation 1appears
next tothe transmission position displa y,shiT
to there commended gear. Using kic
Using kic
kdo
kdown
wn #
Maximum acceler Maximum acceler ation:
ation:depress the accelera-
to r pedal be yond the pressure point. 180 180
Driving and parking

To
protect against engine overrev ,th e automatic
transmission shiTs up tothe next gear when maxi-
mum engine speed has been reached. Glide mode function
Glide mode function
*
N
NO OTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. Wi
th an anticipatory driving st yle, Glide mode
helps youto reduce fuel consum ption.
Glide mode is characterised bythefo llowing:
R The combustion engine is disconnected from
th e driv etra in and continues torun in neutral.
R The transmission position display his sh own
in green.
Glide mode is activated if thefo llowing conditions
are met:
R Drive prog ram ; is selected.
R The speed is within a suitable range. R
The road's course is suitable, e.g. no steep
uphill or downhill inclines or tight bends.
R There is no trailer hitched up tothe trailer
hitch, and no bicycle rack Fitted.
R You do not depress the accelerator or brake
pedal (e xcept for light brake applications).
% Glide mode can also be activated if you ha ve
selected the "Eco" setting forth e drive in the
drive prog ram =.
Glide mode is deactivated again if one of the con-
ditions is no longer met.
V
V ehicles wit ehicles wit h A
h Activ
ctiv e Dist
e Dist ance Assis
ance Assist DIS t DISTR
TRONIC:
ONIC:
when Active Distance Assist DISTRONIC is acti ve,
th e glide mode function is not available.
Glide mode can also be pr evented bythefo llowing
parame ters:
R Incline
R Downhill gradient
R Temp erature
R Height
R Speed
R Operating status of the engine R
Tra1c situation
% Glide mode can be ended bypressing a steer-
ing wheel gearshiT paddle (/ page 179). F
F
unction of t
unction of t he 4MA
he 4MATIC
TIC
4MATIC ensu resth at all four wheels are driven.
To get her with ESP ®
and 4ETS, 4MATIC impr oves
th e traction of your vehicle whene ver a driven
wheel spins due toinsu1cient traction.
If yo ufa ilto adapt your driving style, 4MATIC can
neither reduce therisk of an accident nor override
th e la wsof ph ysics. 4MATIC cannot take account
of road, weather and tra1c conditions. 4MATIC is
only an aid. You are responsible especially for
maintaining a safe distance from theve hicle in
front, forve hicle speed, for braking in good time
and for st aying in lane.
% In wintry road conditions, the maximum e.ect
of 4MATIC can be achie ved only if you use
winter tyres (M+S tyres), with snow chains if
necessar y. Driving and parking
181
181

ity
for high-voltage charging of your vehi-
cle. Pur chase these parts at a Mercedes-
Benz Service Centre and obtain advice
th ere. #
Check the setting of the maximum
ch arge cur rent using thech arging capa-
city shown in the Instrument Displa y.Before
charging at a mains soc ket, ha vethe maxi-
mum permissible charging cur rent forth ere leva nt
mains soc ket or the building inspected byaqu ali-
/ed elect rician. The charging cable supplied is set
to a countr y-speci/c maximum charging cur rent
va lue. When charging abroad, the maximum value
may exceed the permitted value forth at countr y.
When abroad, obser vethe count ry-speci/c la ws
when charging. If you ha vequestions concerning
setting thech arging cur rent or if there is a mal-
function, please contact a quali/ed specialist
wo rkshop. #
Set the maximum permissible charging cur-
re nt in the multimedia system menu
(/ page 292). If
th eex act value of the maximum permissible
ch arging cur rent cannot be set, select the next
smaller adjustable value.
% Ifth eve hicle requ ires more time than usual to
ch arge the high-voltage batter y,ch eck the
maximum charging cur rent settings in the
multimedia system menu. Ov Ov
er
ervie
vie w of t
w of t he c
he char
harging cable contr
ging cable contr ol panel
ol panel The
charging cable cont rol panel sho ws the cur-
re nt status of thech arging process. 1
Supply voltage indicator
2 Charging process indicator 3
Temp erature monitor indicator
4 Safety sy stem indicator
Suppl
Suppl y v
y volt
oltag
age indicat
e indicat or
or1
1 Display
Display
Meaning
Meaning
Lights up whit eThe supplyvoltage is
connected. Char
Char
ging pr
ging pr ocess indicat
ocess indicat or
or2
2 Display Display
Meaning Meaning
Flashes green The high-voltage bat-
tery isch arging. 194
194
Driving and parking

T
T
em
em per
per atur
atur e contr
e contr ol indicat
ol indicat or
or3
3 Display
Display
Meaning
Meaning
Lights up redT hegreen LED 0ashes
simultaneousl y:ove r-
te mp erature – the
ch arging per form ance
is reduced.
The green LED does
not 0ash: overtemper-
ature – thech arging
process is stopped.
Flashes redO vertemperature at
th e mains plug – the
ch arging process is
stopped. Safe
Safe
ty syst
ty syst em indicat
em indicat or
or4
4 Displ
ay
Display Meaning
Meaning
Flashes redC harging cable mal-
function – cann ot
car ryout thech arging
process, reset the
ch arging cable operat-
ing unit.
Lights up redW hite LED is o.:
po we r supply malfunc-
tion – cannot car ry
out thech arging proc-
ess, replace the mains
soc ket.
White LED is on: vehi-
cle malfunction – can-
not car ryout the
ch arging process,
re set thech arging
cable operating unit. When all
four displa yslight up, thech arging cable
operating unit per form s a self-test. If
te mp erature monitor 3indicates a malfunc-
tion, it may help toprotect thech arging cable
from direct sunlight.
T T o r
o r ese
ese t t
t the c
he c har
harging cable oper
ging cable oper ating unit:
ating unit:if
saf ety sy stem 4indicates a charging cable mal-
function or a vehicle malfunction, /rst reset the
ch arging cable operating unit. Todo this, discon-
nect thech arging cable from theve hicle and from
th e mains soc ket and waitfor appr oximately /ve
seconds. If the malfunction persists aTer the
ch arging cable is reconnected, charging at the
mains soc ket is not possible. The charging cable
must be replaced or theve hicle plug must be
ch ecked at a quali/ed specialist workshop,
depending on the indicator. F
F
unctions of t
unctions of t he indicat
he indicator lam
or lamps on t
ps on t he v
he vehicle
ehicle
soc ket
soc ket %
Depending on the national version, your vehi-
cle is equipped with one of thefo llowing vehi-
cle soc kets.
The soc ket 0ap is centrally loc ked and unloc ked
to get her with theve hicle. Driving and parking
195
195

Combo 1
vehicle soc ket
1 Socket lamp
2 Charging process indicator lamp
3 Locking status indicator lamp Combo 2
vehicle soc ket
1 Socket lamp
2 Charging process indicator lamp
3 Locking status indicator lamp
Soc ket lamp 10ashes or lights up as with indi-
cator lamps 2and 3. Ov
Ov
er
ervie
vie w of t
w of t he loc
he loc king st
king st atus
atus Loc
Loc
king st
king st a-
a-
tus
tus 3
3 Display
Display
Meaning
Meaning
% Lights up
white Ve
hicle
soc ket
unloc ked,
insert or
re mo vecharg-
ing cable
% Flashes whiteMalfunction
during locking
or unlocking Ov Ov
er
ervie
vie w of t
w of t he c
he char
harging pr
ging pr ocess st
ocess st atus
atus S
S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Displ
ay
Display Meaning
Meaning
# Flashes
orangeConnection is
being estab-
lished
# Flashesgreen Active energy
0ow 196 196
Driving and parking

S
S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Displ
ay
Display Meaning
Meaning
# Lights up
orangeInter
ruption in
ch arging
# Lights up
green Charging
process com-
ple
ted
# Flashesred
(for appr ox.
90 s) Ve
hicle mal-
function;
ch arging is
not possible S S
t
tar
ar ting t
ting t he alt
he alt er
ernating curr
nating curr ent c
ent char
harging pr
ging pr ocess
ocess
(mode 2/3)
(mode 2/3) &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage. If
th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. *
N
NOOTE
TE Damage due toove rheating of
ch arging cable and charging cable con-
nector During
thech arging process, thech arging
cable and charging cable connector can heat
up within their permissible limit values. The permissible limit
values are in0uenced by
th efo llowing factors:
R the po wer supply system and thech arging
cable are not damaged
R the inst ructions for handling thech arging
cable and the control element on the
ch arging cable ha vebeen obser ved #
Ifth ech arging cable or charging cable
connector becomes too hot, ha vethe
po we r supply system checked. *
N NOOTE TE Damaged or dirty vehicle soc ket
when the soc ket 0ap is open #
Alwayske ep the soc ket co ver and the
soc ket 0ap closed when there is no
ch arging cable connected. This pr otects
th eve hicle soc ket from dirt and damage. #
Make sure that the soc ket co ver is
closed proper lybefore closing the soc ket
0ap. This can otherwise result in damage
which may pr event the soc ket 0ap from
being opened again. Driving and parking
197
197

*
N
NO
OTE
TE Damage totheve hicle soc ket or the
ch arging cable connector due toincor rect
handling Do not use
excessive forc e (maximum 300 N)
to insert thech arging cable connector into the
ve hicle soc ketto the stop. You may otherwise
damage theve hicle soc ket,thech arging cable
connector or their contacts. #
Ifyo ufe el there is increased resis tance,
pull thech arging cable connector out of
th e soc ket and reinsert it. R
R
eq
eq uir
uir ements:
ements:
R The transmission is in position j.
R The vehicle is unloc ked or the distance
between theke y and theve hicle does not
ex ceed 1 m.
R The vehicle is switched o.. The õdisplay
in the Instrument Display is o..
R The charging cable is not taut. Depending on
theve hicle's equipment and on the
national version, your vehicle is equipped with one
of thefo llowing vehicle soc kets:
R Type 1 forch arging with alternating cur rent
(mode 2 or 3)
R Combo 1 forch arging with alternating cur rent
(mode 2 or 3) and charging with direct cur rent
(mode 4)
R Type 2 forch arging with alternating cur rent
(mode 2 or 3)
R Combo 2 forch arging with alternating cur rent
(mode 2 or 3) and charging with direct cur rent
(mode 4) Combo 1
vehicle soc ket 198
198
Driving and parking

Combo 2
vehicle soc ket #
Press the centre rear section of soc ket 0ap
1 and swing the soc ket 0ap forw ards and
open.
The % indicator lamp 2and status dis-
play 3light up white. %
When theve hicle is switched on (the õ
displ ayis lit in the Instrument Display), soc ket
0ap 1cannot be opened. #
Press cat ch7 tothe leT and fold open
soc ket co ver5.
% Vehicles with a vehicle soc ket combo requ ire
only connection 8forth ech arging cable
connector. Open only the upper part of soc ket
co ver5. #
Tocharge at a mains soc ket, insert the mains
plug into the mains soc ket of theex tern al
po we r source tothe stop and set the maxi-
mum charging cur rent if requ ired
(/ page 193). #
Insert thech arging cable connector into vehi-
cle soc ket connection 8tothe stop. If the
wa llbox/charging station is not equipped with
a ch arging cable, inse rtthe plug of theve hi-
cle's charging cable into thewa llbox/charging
station soc ketto the stop.
Make sure that thech arging cable is not taut
when inser ted. The
# indicator lamp 4and status dis-
play 30ash orange and, as soon as the high-
vo ltage battery is charge d, green.
When thech arging cable is connected totheve hi-
cle, theve hicle cann otbe star ted or mo ved.
At the start of thech arging process, thech arge
le ve l display is shown in the Instrument Display
with a charging prediction. The charging predic-
tion either refers to the predicted charge leve l at
th e set departure time, or the time at which the
high- voltage battery will be fully charge d.
% Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control). Driving and parking
199 199