MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual

170 NavigationPOIs (Points of Interest)Dialing the POI phone number
Press the
Call
soft key in the Route
guidance menu.
Dialing will begin. In the status bar, the
off-hook symbol will appear. If the
person called answers the call, the call
is active. You talk over the hands-free
set.

Press K to end the call.iThe
Call
soft key is visible if vehicle is
equipped for phone operation and
Mercedes-Benz specified mobile
telephone is inserted in phone cradle.
209_MY09_A_US.book Seite 170 Montag, 26. Mai 2008 6:12 18

171 Navigation
Today’s plan


Today’s plan
The today’s plan memory can be used to
save destinations for which routes can be
calculated one after the other.

The memory can save a maximum of 18
destinations.You can add a destination to today’s plan
from the Route guidance menu

from the Last destinations memory and

from the Destination memory.

Press the
Plan
soft key in the
corresponding menu.
The message
The

172 NavigationToday’s planAvailable soft keys
Bestway
soft key:
Sortes entries to obtain the most
efficient route through all the
destinations
( page
172)
.

Rnd trip
soft key:
Sortes entries to obtain a route that
circles through all the destinations and
eventually ends at the starting position ( page
172)
.

Del. all
soft key:
Deletes all entries.

Save
soft key:
Saves an entry to the destination
memory.

Details
soft key:
Shows the entry in full.

Page
V and
Page
v soft keys (if
available):
Use the
Page
V and
Page
v soft keys
to display the next or previous page.

Delete
soft key:
Deletes the selected entry.

Back
soft key:
Returns you to the previous menu.
Best way
Press the
Bestway
soft key in the
today’s plan memory.
The today’s plan memory is sorted to
obtain the most efficient route through
all the destinations.
Round trip
Press the
Rnd trip
soft key in the
today’s plan memory.
The today’s plan memory is sorted to
obtain a route that circles through all
the destinations. The current vehicle location is placed
at the bottom of today’s plan as Starting position
entry.
iThe Starting position can be represen-
ted by e.g. a parking lot or an off road
location.
209_MY09_A_US.book Seite 172 Montag, 26. Mai 2008 6:12 18

173 Navigation
Today’s plan
Display details for starting position
Push the joystick to G to select Starting position
.

Press the
Details
soft key.
The address information will appear.
Selecting a destination from the
today’s plan
Activate the today’s plan.

Push the joystick to G or g to
select an entry.

Use the
Page
soft keys to scroll page-
wise through the list (if available).

Press E.The Start route guidance menu will
appear
( page
137)
.
Saving a today’s plan entry in the
destination memory 
Activate the today’s plan.

Press the
Save
soft key.
The Destination memory input menu
will appear
( page
162)
.
Deleting a today’s plan entry
Activate the today’s plan.

Push the joystick to G or g to
select an entry.

Press the
Delete
soft key.
A prompt message will appear.

Push the joystick to H to select
Yes
.
If you do not want to delete the entry:
Press E to confirm
No
.

Press E.The system deletes the destination in
the today’s plan. The entries below the
destination deleted move up by one
position.
Deleting all the today’s plan entries
Activate the today’s plan.

Press the
Del.
all
soft key.
A prompt message will appear.

Push the joystick to H to select
Yes
.
If you do not want to delete the entries:
Press E to confirm
No
.

Press E.The system deletes all the destination
entries in the today’s plan.
iWhen you reach the destination, route
guidance ends and the system deletes
the today’s plan entry.
209_MY09_A_US.book Seite 173 Montag, 26. Mai 2008 6:12 18

174 NavigationSoftware Updates

Software Updates
209_MY09_A_US.book Seite 174 Montag, 26. Mai 2008 6:12 18

175 Navigation
Software Updates
1Ejecting DVD2Opening/closing the display unit3Warning message
Press EJECT to
close
You can update the system with a new
navigation DVD. The new DVD may include
new map/road information.
Starting an updateDVDs are loaded and ejected at the
navigation module.
Switch the COMAND on
( page
34)
.
Ejecting
Press l.The display unit moves forward and
then tilts down. The DVD NAVIGATION
slot is visible.

Press the l button left of the

DVD NAVIGATION slot.The navigation module ejects the DVD.The message
No DVD in drive.
Please insert Navigation DVD.

will appear.

Remove the DVD from the slot.
Warning
G
The display unit can cause injury if
contacted when open. Please close after
inserting a navigation DVD. !Do not place anything on the lowered
display panel
(i.e. do not use as a shelf)
.
Placing objects on the lowered display
panel may result in damage to the
display or COMAND

unit which is not covered by the
Mercedes-Benz Limited Warranty.
iUpdating may take several minutes.
During updating, the operation of
COMAND is restricted. You cannot
switch off the system.iThe navigation module is located
behind the display unit of the COMAND ( page
174)
.
iThere are two l buttons. One is on
the display unit 2. The other is located
left of the DVD NAVIGATION slot 1
behind the display.
209_MY09_A_US.book Seite 175 Montag, 26. Mai 2008 6:12 18

176 NavigationSoftware UpdatesLoading
Insert the new navigation DVD into the
DVD slot with the label side up.The message
Navigation is
initializing. Please wait.
will
appear.

Press l on the display unit to return
the display unit to its closed position.The display unit tilts up and then moves
to the rear.
After that, the COMAND loads the
software on the DVD.Shortly after that, the progress bar
appears. After some time, the progress
bar reaches 100%.The update is completed. You can now
operate the navigation system again.iInserting a second DVD with another
DVD still loaded will cause damage to
the DVD drive which is not covered by
the Mercedes-Benz Limited Warranty.
iThe message
Press EJECT to close
will
appear. If l on the display unit is
not pressed within 20 seconds, eight
successive series of two beep tones
will sound to remind you to return the
display to its closed position by
pressing l on the display unit. After
the beep tones COMAND returns the
display unit to its closed position.
209_MY09_A_US.book Seite 176 Montag, 26. Mai 2008 6:12 18

177
Service
SMS

Tele Aid
209_MY09_A_US.book Seite 177 Montag, 26. Mai 2008 6:12 18

178 ServiceGeneral Notes

General NotesVehicle EquipmentiThis Operator’s manual describes all
features, standard or optional,
potentially available for your vehicle at
the time of purchase. Please be aware
that your vehicle might not be
equipped with all features described in
this manual.
209_MY09_A_US.book Seite 178 Montag, 26. Mai 2008 6:12 18

179 ServiceSMS


SMS
With the SMS Received list, you can
receive SMS messages provided that SMS
messaging is available from your mobile
phone service provider.

Activate the System main menu ( page
40)
.

Press the
SMS
soft key.
The Received list will appear.
The status bar shows date and time of
the message.One line is provided for each message.Symbol = = Message unreadSymbol z = SMS message
iThe functions described here apply if
your vehicle is equipped with mobile
phone cradle and a Mercedes-Benz
specified mobile phone.iIf you have received new SMS
messages, n is displayed on the
status bar. Additionally, a message
received tone is played.
iIf another system is active (e.g. radio),
a window with the message
Received a
new SMS
appears when SMS message is
coming in.
SMS Received listiIf there is no SMS message, the
SMS

soft key appears greyed out.
209_MY09_A_US.book Seite 179 Montag, 26. Mai 2008 6:12 18