light MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual

90 Satellite radioSatellite radio operationYou will see the Satellite radio main menu
automatically after 8 seconds

if you press s.
Selecting a station on the memory list
In the Satellite radio main menu, press
the
Presets
soft key.
The Satellite preset memory ( page
89)
will appear.

Push the joystick to g
or G to high
-
light a memory preset.

Press E.The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.

In the Satellite radio main menu, press
the
Info
soft key.
The information display will appear.You will see (if available)
the full station name

additional program information
Switching back to the Satellite radio main
menu
Press the
Back
soft key.
or
Press the
Info
soft key again.
iAn existing entry is overwritten in the
memory list when a new input is given.If the message
Updating station list

appears the presets may be overwrit-
ten.
Displaying information
209_MY09_A_US.book Seite 90 Montag, 26. Mai 2008 6:12 18

103 Telephone
Telephone operation
The system detects an incoming call, the
phone rings.Incoming calls are indicated in a window in
any system (e.g. radio).The window shows:
the caller’s number if it is transmitted
or

the caller’s name if her or his name and
number are saved in the phone book or

Unknown
.
Accepting a call 
Press k.
or
Press E to confirm
accept
.
The display will change to the
call
menu
( page
108)
. In the status
bar, the off-hook symbol will appear.
An active audio source will be muted.
You talk over the hands-free set.
Rejecting a call 
Press K.
or
Push the joystick to H to highlight
re-
ject
and than press E.
Setting the volume for hands-free ope
-
rationRaising the volume
Turn the rotary control on the e but
-
ton to the right.
Lowering the volume
Turn the rotary control on the e but
-
ton to the left.
Ending a call 
Press K.
or
Press the
End
soft key.
Incoming call
209_MY09_A_US.book Seite 103 Montag, 26. Mai 2008 6:12 18

105 Telephone
Telephone operation
Begin dialingWhen you have entered the telephone
number
Press E.
or
Press k.
or
In the Telephone menu, press the
Send

soft key.
Dialing will begin. If a name is associated
with the phone number saved in the phone
book, the name appears on the screen. In
the status bar, the off-hook symbol will ap
-
pear.COMAND will mute an active audio source.
If the person called answers the call, the
call is active. You talk over the hands-free
set.The message
Call failed
may

appear if you place an outgoing call.

Try again later.Subsequent dialingTransmitting other dial tones:
During a call you can press the number
keys 1 through 0, # and *.
Ending a call 
Press K.
or
Press the
End
soft key.
Redial 
Press k.
or
Press the
Dialed#
soft key.
The Dialed numbers list will appear.
The most recently dialed number is
highlighted.

Push the joystick g or G to select
the desired entry.
To dial the selected number:
Press E.
or
Press k.
or
Press the
Send
soft key.
209_MY09_A_US.book Seite 105 Montag, 26. Mai 2008 6:12 18

106 TelephoneTelephone operationSelecting an entry from the Received
calls listThe COMAND automatically generates a
list of the last 10 calls received. The list is
sorted chronologically with the most
recently received call at the top of the list.Displaying the list
In the Telephone menu
( page
102)
,
press the
Recvd#
soft key.
The list is displayed and the most
recently received call is highlighted.
Received calls listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone number
You can select the following functions:
Changing the list display

Selecting an entry and begin dialing

Ending a call
( page
105)
Changing the list display 
Press the
123
soft key.
The display changes to numbers.
or
Press the
ABC
soft key.
The display changes to names.
Selecting an entry and begin dialing
Push the joystick to g or G to
select the desired entry.

Press E.
or
Press k.
or
Press the
Send
soft key.
The telephone dials the number.
209_MY09_A_US.book Seite 106 Montag, 26. Mai 2008 6:12 18

107 Telephone
Telephone operation
Selecting an entry from the Dialed num
-
bers listThe COMAND automatically generates a
list of the last 10 numbers dialed. The list
is sorted chronologically with the most
recently dialed number at the top of the
list.Displaying the list
In the Telephone menu
( page
102)
,
press the
Dialed#
soft key.
The list is displayed and the most
recently dialed number is highlighted.
Dialed numbers listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone number
You can select the following functions:
Changing the list display
( page
106)

Selecting an entry and begin dialing ( page
106)

Ending a call
( page
105)
Toggling between lists
Push the joystick to H or h to
select the desired list.
Missed callsIf there are one or more missed calls avai
-
lable on the mobile phone, a correspon
-
ding message will appear.
Press the
Back
soft key or press E to
return to the Telephone menu.
209_MY09_A_US.book Seite 107 Montag, 26. Mai 2008 6:12 18

111 Telephone
Telephone operation
The phone book contains all entries
of the internal memory of the mobile
phone (TDMA, CDMA and GSM mobile
phone)

of the SIM card (GSM mobile phone)
Displaying the phone book 
In the Telephone menu
( page
102)
,
press the
Z
soft key.
The phone book will appear.
The first entry found is at the top of the list
and highlighted.
Entries marked with symbols have been
imported into the phone book from the in
-
ternal memory of the mobile phone. Usable phone number categories:
Symbol
: Cell number

Symbol
: Home number

Symbol
: Work number
And additional categories:
Symbol
: Fax number

Symbol
: Pager number

Symbol
: Main number
Phone book
Phone book
entry
Status bar shows
A phone number
Unknown
A name for a
phone number
The phone number
Several numbers
Several numbers
209_MY09_A_US.book Seite 111 Montag, 26. Mai 2008 6:12 18

114 NavigationImportant notes

Important
notes
Warning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving. Do not watch display screen or operate but
-
tons while the vehicle is in motion - let voice
instructions guide you. Stop at a safe locati
-
on before using buttons or making correc
-
tions.Traffic regulations always have priority over
any route recommendations given.Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is co
-
vering a distance of 44 feet (approximately
14 m) every second.
The route calculated by COMAND is a re
-
commendation on how to best reach your
selected destination.During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care
-
fully and always obey traffic laws and road
signs even if they contradict COMAND in
-
structions.
Warning
G
The Navigation DVD module contains a
Class 1 laser product. There is a danger of
invisible laser radiation if the cover is ope
-
ned or damaged.Do not remove the cover. The Navigation
DVD module does not contain any parts ser
-
viceable by the user. For safety reasons,
have any necessary service work performed
by qualified personnel. The display unit can cause injury if contac-
ted when open. Return the display unit after
inserting a Navigation DVD to its closed
position
( page
174)
.
209_MY09_A_US.book Seite 114 Montag, 26. Mai 2008 6:12 18

124 NavigationDestination inputEntering a street
In the Enter street menu
( page
122)

push the joystick to h, H, g or
G to select the characters. After each
selection, press E.

Push the joystick to F or f to
select characters diagonally.
or
Press one of the number keys 1 to
9 and 0 to enter digits.

Press the
Delete
soft key if
necessary.
The character last entered by the
system is deleted.
Back to the previous menu
Press the
Back
soft key.
Confirming a street (menu)
Press E longer than 2 seconds.
or
Select the ( symbol. Push the
joystick to h, H, g or G to do
so.

Press E.
Entering destination addressiIf you enter the first character, the State
and
City
soft keys disappear.
The status bar shows the number of
current matches.
iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the streets stored on the
navigation DVD. The character
selected appears magnified.Greyed out characters are not available
and cannot be selected.
iIf there is only one match for the
entered street name, the ( symbol is
highlighted automatically.
209_MY09_A_US.book Seite 124 Montag, 26. Mai 2008 6:12 18

126 NavigationDestination inputYou can use the following functions
entering the house number

entering any house number by pressing
the
Any #
soft key

selecting an intersection to that street ( page
128)
.

Press the appropriate number keys
0, 1 to 9.
or
Push the joystick to h, H, g or
G to select the numbers. After each
selection, press E.

Push the joystick to F or f to
select numbers diagonally.
or
Press the
Any #
soft key to select the
available address range of the chosen
street.
Confirming a house number
Press E longer than 2 seconds.
or
Select the ( symbol. Push the
joystick to h, H, g or G to do
so.

Press E.The Select city list (
 page
127) will
appear.or
iFor quicker input, COMAND offers
available numbers from the number

set based on your selections and the
house numbers stored on the
navigation DVD. The number

selected appears magnified.Greyed out numbers are not available
and cannot be selected.
iEach option is possible as long as the
entered house number is available
from the information stored on the
DVD. iIf there is only one match for the
entered house number, the ( symbol
is highlighted automatically.
209_MY09_A_US.book Seite 126 Montag, 26. Mai 2008 6:12 18

130 NavigationDestination input
In the Enter city menu push the joystick
to h, H, g or G to select the
characters. After each selection, press
E.

Push the joystick to F or f to
select characters diagonally.
or
Press one of the number keys 1 to
9 and 0.

Press the
Delete
soft key if
necessary.
The character last entered is deleted.
Back to the previous menu
Press the
Back
soft key.
Confirming a city (menu)
Press E longer than 2 seconds.
or
Select the ( symbol. Push the
joystick to h, H, g or G to do
so.

Press E.
iIf you enter the first character, the
Map

and
State
soft keys and a city name
already available disappear.
The status bar shows the number of
current matches.
iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the cities stored on the
navigation DVD. The character
selected appears magnified.Greyed out characters are not available
and cannot be selected.
iIf there is only one match for the
entered city name, the ( symbol is
highlighted automatically.
209_MY09_A_US.book Seite 130 Montag, 26. Mai 2008 6:12 18