phone MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual

28 At a glanceMultifunction steering wheel

Multifunction steering wheel
Function
Page
1
Multifunction display
2
Volume settingç Volume downæ Volume up
3434
3
Making calls:s

Accepting calls,RedialingtEnding or rejecting calls
103105103
4
Multifunction display
menu change:è forwardÿ back
29
5
Radio mode:j Next stationk Previous station
4949
Single CD and CD changer
mode:j Next trackk Previous track
6464
MP3 CD mode:j Next trackk Previous track
7878
Satellite radio modej Next stationk Previous station
8787
Telephone modej Next list entryk Previous list entry
112112
Function
Page
209_MY09_A_US.book Seite 28 Montag, 26. Mai 2008 6:12 18

29 At a glance
Multifunction steering wheel

Switch the multifunction display to the
respective system if you wish to
operate the system using the buttons
on the multifunction steering wheel.

On the multifunction steering wheel,
press è or ÿ repeatedly until
one of the following, Radio, Single CD
or MP3 CD, CD changer, Satellite radio
or Telephone display appears in the
multifunction display of the instrument
cluster.
Radio operation1Waveband2Station frequency
Single CD/ CD changer operation1Current CD2Current trackMP3 CD operation1MP3 mode2Current MP3 track
Satellite radio operation1SAT mode and preset channel number2Setting for station selection using
memory3Channel name or number
Selecting the multifunction display
209_MY09_A_US.book Seite 29 Montag, 26. Mai 2008 6:12 18

30 At a glanceMultifunction steering wheelTelephone operationList with a phone book entryOn display will appear either:
the main display with the
READY

message

a list with either a phone book entry or
one of the last 10 outgoing calls

In order to close the list display,

press t.This switches to the telephone main
display.
This allows you to choose whether the
radio automatic seek tuning function
selects stations via frequency or memory
preset
( page
49)
.

Frequnc
.
The radio will tune by frequency

Memory

The radio will tune by preset stations.

On the multifunction steering wheel,
press è or ÿ repeatedly until
the
Settings...
menu appears in the
multifunction display of the instrument
cluster.

Pressj.A collection of submenus appears in
the multifunction display.

Press ç repeatedly to select the Vehicle
submenu.

Press j and select
Audio search
function
.

Select
Frequenc.
or
memory
by pressing
æ or ç.
Audio search function
iMemory
is set as factory setting.
209_MY09_A_US.book Seite 30 Montag, 26. Mai 2008 6:12 18

31 At a glance
Menu system


Menu system
The menu system allows for easy
operation of COMAND. Main menus are provided for the following
main functions:
Audio (AM/FM radio, CD, CD changer,
MP3 CD, AUX)

Satellite radio

Telephone

Navigation

Service
Calling up main menus
Menu displayA display may consist of three areas.Example: FM menu1Soft keys area2Main area3Status barThe functions currently assigned to the
soft keys are displayed in the soft key
sections 1.
Main function
Activating main
menu
Audio ( page
46)

Press A.
Satellite radio ( page
86)

Press B.
Telephone ( page
102)

Press a.
Navigation ( page
118)

Press b.
System ( page
40)

Press
.
209_MY09_A_US.book Seite 31 Montag, 26. Mai 2008 6:12 18

32 At a glanceMenu systemThe main area 2 shows messages and
settings.You can change the settings by operating
the system.The status bar 3 is divided into three
areas.Left side: The current operating mode is indicated. In
this example: Radio
Center:The status of the current operating mode
or other selectable functions are indicated.In this example:
FM = current waveband

1 = memory location of station,

e.g. “1”
Right side:General status information is indicated
independent of the operating mode.In this example:
= Reception strength of the
mobile phone

Time
Menu functions and submenusUsing the soft keys, functions can be
switched ON or OFF, or submenus can be
called up.E.g. the radio menu:
The
FM/AM
soft key switches between
FM and AM band.

The
Scan
soft key starts/stops the
channel scan.
iA maximum of five soft keys may be
displayed on each side of the main area
2.
209_MY09_A_US.book Seite 32 Montag, 26. Mai 2008 6:12 18

33 At a glance
Menu system
In some situations, soft keys may not have
any function and are not operational. A
soft key without function appears shaded
out.E.g.: Soft keys on the left and right sideExiting from submenusUse the
Back
soft key 1 to exit a
submenu. The display switches to the next
higher menu level.
The system does not accept setting
modifications which have not been stored.
There are exceptions where pressing the Back
soft key will also store new settings.
These exceptions, whenever applicable,
are referenced on the following pages.
Permanent time display The system permanently shows the actual
time in the status bar.Time display with ignition on and phone
option installed1Actual time2Indication of the current field strength
of the mobile phone signal
Time display with ignition on and no phone
option installed1Actual time shown with large
characters
iThe time only appears in the status bar
when the ignition is switched on.If there is no phone connected, the
field strength indicator is not shown.
209_MY09_A_US.book Seite 33 Montag, 26. Mai 2008 6:12 18

34 At a glanceQuick reference COMAND

Quick
reference
COMAND

Switching on
Turn the key in the starter switch to
position 1 or 2 if the COMAND was
switched off by turning the key in the
starter switch to position 0 and
removing it.
or
Press e.In both cases, the system will activate
the operating mode which was active
when the system was switched off.
Switching off
Turn the key in the starter switch to
position 0 and pull the key out.
or
Press e.
When the audio is playing, the volume
knob will adjust the audio volume, and also
the volume for telephone and navigation.During a telephone call (talking or ringing),
the volume knob will adjust the telephone
voice and ringer volume.The volume for the navigation announce-
ments can only be changed while an
announcement is being made.When you adjust the volume, the system
will automatically store the setting for the
current operating mode.
iYou have the following options to
control the system:
at the COMAND

at the multifunction steering wheel
(refer to vehicle Operator’s Manual)
This Operator’s Manual describes the
control at the COMAND.Unless otherwise indicated, the
descriptions and illustrations refer to
the COMAND.
Switching the COMAND control unit
on and offiFor an explanation of starter switch
positions, refer to vehicle Operator’s
Manual.iIf the key is not in the starter switch in
position 1 or 2, the system will automa-
tically stop after around 30 minutes.
Volume
209_MY09_A_US.book Seite 34 Montag, 26. Mai 2008 6:12 18

85 Satellite radio
Subscribing


Subscribing

Press B to switch to satellite radio
operation.The Satellite radio main menu will ap
-
pear and displays the
Weather
channel.
You cannnot select any other station.

Press the
Service
soft key to display
the Service information display.
The Service information display will ap
-
pear.
Service information display1Phone number of the provider,

(SIRIUS) or “Call Service Provider”
2The Electronic Serial Number (ESN) of
your satellite receiver
Contact satellite radio service provider
at the telephone number displayed in
the screen.
After the connection is made:
Follow the instructions given by the
operator.The activation process may take up to
10 minutes. If it is successful, you will
see the display with the message

Acquiring Signal...
( page
86)
follo
-
wed by the Satellite radio main menu ( page
86)
.
Subscribing to satellite radio
iDepending on subscription status, soft
keys may or may not appear on the left
and right side of the service information
display.
iIt is also possible to activate the satelli
-
te service online. To do so please visit
SIRIUS Satellite Radio’s website at
www.sirius.com (USA) or

www.siriuscanada.com (Canada)iIf a subscription is not included with
system purchase, credit card informati
-
on is required to activate your account.If a satellite receiver is not installed or
not properly installed:The message
No Satellite Radio
will
appear.
209_MY09_A_US.book Seite 85 Montag, 26. Mai 2008 6:12 18

91 Satellite radio
Satellite radio operation
You can call the provider service center for
questions or releases, whenever you need.
Press the
Service
soft key.
The Service information display will ap
-
pear.
1Phone number of the provider,

(SIRIUS) or “Call Service Provider”
2The Electronical Serial Number (ESN)
of your satellite receiver

Press the
Back
soft key to switch back
to the Satellite radio main menu.
While receiving a new channel list the mes
-
sage
Updating station list
will appear.
The station last tuned will be muted until
the update is completed. You cannot ope
-
rate the satellite radio.After completion of the update, the

Satellite radio main menu will appear.

The station last tuned to will begin to play.
Refer to chapter “At a glance” on how to
adjust sound settings.
Volume
( page
34)

Balance control and fader
( page
36)

Bass and treble control
( page
37)

Sound functions
( page
37)
Displaying service information
Station list updates
Sound settings
209_MY09_A_US.book Seite 91 Montag, 26. Mai 2008 6:12 18

93
Telephone
Important
notes
Telephone
operation
209_MY09_A_US.book Seite 93 Montag, 26. Mai 2008 6:12 18