ESP MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual

152 NavigationDuring route guidanceThis function allows you to select an
intermediate destination while route
guidance is active. A stopover destination
may be a gas station or a restaurant or any
other place. When the route to the
stopover destination is calculated, the
system calculates the route from the
stopover destination to the main
destination.Entering a stopover destination
Activate the soft key display ( page
148)
.

Press the
Stopovr
soft key.
The map is displayed in full view.orThe Stopover still active menu will
appear
( page
154)
if a stopover
already exists.
Available soft keysAfter pressing a softkey on the left side, a
corresponding list
( page
153)
or, if a POI
is close by, the map will appear with one
POI spotlighted
( page
168)
.

soft key:
Shows a list of Mercedes-Benz Centers
near your location.

soft key:
Shows a list of filling stations or the
map with one filling station spotlighted.

soft key:
Shows a list of parking facilities or the
map with one parking facility
spotlighted.

soft key:
Shows a list of restaurants or the map
with one restaurant highlighted.

soft key:
Shows a list of hospitals or the map
with one hospital spotlighted.
If you press this soft key the following
warning message will appear:
Stopover function
209_MY09_A_US.book Seite 152 Montag, 26. Mai 2008 6:12 18

158 NavigationDuring route guidanceDisplay in Map
In the Settings menu
( page
155)
,
press the
Map
soft key.
The available options are displayed.
The symbol _ indicates the present
setting.
You can select the following map
information:
Time of Arrival/Dist. to
Dest.The status bar displays the estimated
time of arrival and the distance to
destination. If a stopover destination is
active, the corresponding stopover
time and distance information are
displayed.

GPS coordinatesThe status bar displays the following
data: 
your current position in the form of
coordinates

the number of satellites currently
received

the height above sea level

No displayThe status bar displays the road you
are currently driving on.

Use the joystick to g or G to select
the option with the symbol -.

Press button E.The selected option is activated.

Press the
Back
s o f t k e y t o c o n f i rm a nd
return to the map.
iIf the split screen is active the road
name will appear in the status bar.
209_MY09_A_US.book Seite 158 Montag, 26. Mai 2008 6:12 18

167 Navigation
POIs (Points of Interest)

Push the joystick to G or g to
select the desired POI.

Press E.The Start route guidance menu will
appear
( page
137)
.
Entering a city
In the Find menu, push the joystick to
G to select menu item
Within a
city
.

Press E.The Enter city menu will appear ( page
129)
.

Enter the city and press E to confirm.A list showing the available POIs within
the entered city will appear.

Select the desired POI from the list and
press E to confirm.The Start route guidance menu will
appear
( page
137)
.
Entering a POI by name
In the Select POI category menu, press
the
Name
softkey.
or
In the Find menu, push the joystick to
G to select menu item
By
name
.
The Enter POI menu will appear.
Enter POI menu

Enter the POI name and press E to
confirm.A list showing the entered POI name
will appear.

Press E.The Start route guidance menu will
appear
( page
137)
.
iIf menu item
By
name
is chosen, the
corresponding category symbol will
appear in first line.
209_MY09_A_US.book Seite 167 Montag, 26. Mai 2008 6:12 18

171 Navigation
Today’s plan


Today’s plan
The today’s plan memory can be used to
save destinations for which routes can be
calculated one after the other.

The memory can save a maximum of 18
destinations.You can add a destination to today’s plan
from the Route guidance menu

from the Last destinations memory and

from the Destination memory.

Press the
Plan
soft key in the
corresponding menu.
The message
The

181 Service
Tele Aid


Tele Aid
Tele Aid incorporates the following
functions:
Emergency call system

Roadside Assistance

Information
For certain emergency situations, the
system automatically triggers an
emergency call. An emergency call can
also be triggered manually by pressing the
corresponding button. Refer to your
vehicle Operator’s Manual for additional
information.
If the system initiates an emergency call, Connecting call
and the
ß symbol will
appear on the status bar. All active
connections are terminated.
During the emergency call,
Call
Connected

appears on the status bar. No operation
from COMAND is possible, so you cannot
disconnect the emergency call.
Roadside Asssistance will assist if
technical problems with your vehicle are
experienced. Roadside Assistance can be requested
manually by pressing the corresponding
button. Refer to your vehicle Operator’s
Manual for additional information. Upon request of Roadside Assistance, the
system initiates the call to the Assistance. Connecting call
and the
ß symbol will
appear on the status bar. All active
connections are terminated except
Emergency call.
Emergency call system
Roadside Assistance
209_MY09_A_US.book Seite 181 Montag, 26. Mai 2008 6:12 18

182 ServiceTele AidIf the connection is made, the message Call
Connected
appears on the status bar.
During activation of a Roadside Assistance
call
it is possible to switch to navigation

you can initiate an Emergency call.
Terminating the connection
Press K.COMAND reverts to the system last
active before Tele Aid was activated.
A call to the Response Center will be
initiated by pressing the corresponding
button. Information regarding the opera-
tion of your vehicle, the nearest authorized
Mercedes-Benz Center or Mercedes-Benz
USA products and services is available to
you. Refer to your vehicle Operator’s Man-
ual for additional information.When an information call is initiated, Connecting call
and the
ß symbol will
appear on the status bar. All active
connections are terminated except
Emergency call and Roadside Assistance
call.
When the connection is made, the
message
Call
Connected
appears on the
status bar.
During activation of an Information call
it is possible to switch to navigation

you can initiate an Emergency call or
Roadside Assistance call.
Terminating the connection
Press K.COMAND reverts to the system last
active before Tele Aid was activated.
Information
209_MY09_A_US.book Seite 182 Montag, 26. Mai 2008 6:12 18

186 GlossarySoft keys
Keys that activate different functions.
Function of key depends on the selec
-
ted operating mode.
Tele Aid
(Tele
matic
Alarm
Identification on
De-
mand)The Tele Aid system consists of three
types of response: automatic and ma
-
nual emergency, roadside assistance,
and information. Tele Aid is initially

activated by completing a subscriber
agreement and placing an acquain-
tance call.
Refer also to the vehicle

operating instructions.The Tele Aid system is operational pro
-
vided that the vehicle’s battery is char
-
ged, properly connected, not damaged,
and cellular and GPS coverage is avai
-
lable.
Unlock code
Your unlock code prevents unauthori
-
zed persons from using your telephone.

The unlock code is a number string
you must enter when switchingon the telephone if you have lockedthe phone before turning it off or if the
phone is set to lock automatically.
Voice output
During a trip, apart from visual informa
-
tions (symbol or map displays),
COMAND also provides all of the
necessary
spoken route information
via voice output.
WB
Weather Band
209_MY09_A_US.book Seite 186 Montag, 26. Mai 2008 6:12 18