display MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual

47 Audio
Audio operation

If an audio submenu is displayed, press
the
Back
soft key until the Audio menu
is displayed.
or
Press A again.

In the Audio menu, press the soft key
for the desired audio source.
Switching On
Press J.The system mutes the active audio
source and the
ß symbol is displayed in
the status bar. The soft keys on the left
side are greyed out in some submenus.
Switching off
Press J again.
iThe
CD
or the
MP3
soft key is
available, depending on the medium
inserted in the CD AUDIO slot.The
CD
soft key is available if a CD
changer is connected to the COMAND.
Selecting an audio sourceMuting
iCOMAND will also deactivate if you
Press A, B, g
, h

Change the volume at COMAND or
the multifunction steering wheel

Operate the joystick

Press any keypad button except
#

Press j or k at the
multifunction steering wheel if the
audio menu is selected

Press any soft key.
209_MY09_A_US.book Seite 47 Montag, 26. Mai 2008 6:12 18

48 AudioRadio operation

Radio operation

In the Audio menu, press the
Radio
soft
key.
The Radio main menu will appear. The
station last tuned to will begin to play.
Radio main menu1Soft key assignment2Main area3Status barSwitching back to the Audio menu
Press the
Back
soft key.
You can select between FM-, AM- and WB-
Band.AM Band
In the FM Radio main menu, press the FM/AM
soft key until “AM” is displayed in
the status bar.
The AM station last tuned to will begin to
play. The frequency will appear in the
display.Switching back to FM band
Press the
FM/AM
soft key.
The station last tuned to will begin to
play.
Switching to radio operation
iThe
Sound
soft key is available if
COMAND is equipped with a sound
amplifier.
Changing the Radio band
Frequency band
Frequency range
FMAM
87.7 - 107.9 MHz530 - 1710 kHz
209_MY09_A_US.book Seite 48 Montag, 26. Mai 2008 6:12 18

49 Audio
Radio operation
Weather Band WB
In the FM or AM Radio main menu,
press the
WB soft key.
An automatic scan is starting and the

COMAND plays and displays the
channel of the first strong WB station.
Switching back to FM or AM band
Press the
FM/AM
soft key.
or
Press the
WB soft key
The station last tuned to will begin to
play.
Switching back to the Audio menu
Press the
Back
soft key.
The Weather Band WB station will con
-
tinue to play.
You can use the following functions:
Automatic seek tuning
( page
49)

Manual tuning
( page
50)

Station selection via direct frequency
entry (FM, AM)
( page
50)

Preset station selection via number
keypad
( page
51)

Automatic station scan (FM, AM) ( page
51)

Station selection from the FM/AM
preset menu
( page
54)

Station selection from the FM/AM
Autostore presets
( page
54)
Automatic seek tuningVia memory presetsFM and AM bands
Press g or h.
or
Push the joystick to g
or G.
The radio will tune to the frequency
assigned to the next memory location.
If none has been set by you, the radio
will not change the station.
iWith the number keys 1 - 7 it is pos
-
sible to choose a channel.The message
No channel
will appear if
the system could not detect a channel.
Selecting a station
iMemory
must be activated in the Audio
search function menu, which appears
in the multifunction display.
Access this menu from the Settings...
menu via the Vehicle
submenu
( page
30)
. For additional
information refer to separate
Operator’s Manual instructions.
209_MY09_A_US.book Seite 49 Montag, 26. Mai 2008 6:12 18

50 AudioRadio operationVia frequency
Press g or h.
or
Push the joystick to g
or G.
The radio will tune to the next
receivable station (FM, AM) or channel
(WB) of descending/ascending
frequency depending on the direction
of seek.
WB direct channel selection
Press a number key 1 through 7.
Manual tuning (FM, AM)
Activate the desired wave band ( page
48)
.

Press g or h longer than 2 se
-
conds.The function rapidly scans the
frequencies.

Press g or h repeatedly to
change the frequency step by step.
or
Push the joystick to H or h.Each
push of the joystick
will change
the frequency by one step.
FM BandThe frequency displayed will change in in
-
crements of 0.2 MHz.
AM BandTuning will take place in increments of
10
kHz.
Station selection via direct frequency
entry (FM, AM)E.g.: 102.7 MHz in the FM band
Activate the desired wave band ( page
48)
.

Press *.An input line will appear.

Enter the desired frequency with the
number keys within 8 seconds, e.g.
1027 for 102.7 MHz.
iFrequenc.
must be activated in the
Audio search function menu, which
appears in the multifunction display.
Access this menu from the Settings...
menu via the Vehicle
submenu
( page
30)
. For additional
information refer to separate
Operator’s Manual instructions.
iThe selected channel is not shown in
the status line.
209_MY09_A_US.book Seite 50 Montag, 26. Mai 2008 6:12 18

56 AudioCD operation
Avoid touching the CD surface with
your fingers.

Clean the CD with a dry, lint-free cloth.
Wipe them from the inside to the outer
edge. Never wipe the CD in a circular
motion.

Do not use rubbing alcohol or solvents
to clean the CDs.

Do not expose the CDs to heat or direct
sunlight.

Do not write or put stickers on CD.
Loading a CD into the CD drive
Tips on caring for your CDs
Loading a CDWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
iThere are two l buttons. One is on
the display unit. The other is located
left of the CD AUDIO slot behind the
display, see next page. iThe CD drive can acommodate either
audio or MP3 CDs
( page
70)
.
209_MY09_A_US.book Seite 56 Montag, 26. Mai 2008 6:12 18

58 AudioCD operation1Ejecting audio CD2Opening/closing the display unit3Warning message
Press EJECT to
close

With the COMAND switched on, press
l.The display unit moves forward and
then tilts down. The CD AUDIO slot is
visible.

Press the l button left of the

CD AUDIO slot to eject a CD already
loaded.

Remove the CD from the slot.

Insert a CD into the slot. The CD should
be inserted with the label side up.The COMAND pulls the CD in.

Press l on the display unit to return
the display unit to its closed position.The display unit tilts up and then moves
to the rear.Playback begins with track number
one.The message
CD error
will appear if
there is a media error.

Remove the CD or switch to
another operation.
Warning
G
The display unit can cause injury if
contacted when open. Please close after
inserting an audio CD. !Do not place anything on the lowered
display panel
(i.e. do not attempt to use
as a shelf)
. Placing objects on the
lowered display panel may result in
damage to the display or COMAND

unit which is not covered by the
Mercedes-Benz Limited Warranty.
iInserting a second CD with another CD
still loaded will cause damage to the
CD drive which is not covered by the
Mercedes-Benz Limited Warranty.
iThe message
Press EJECT to close
will
appear. If l on the display unit is
not pressed within 20 seconds, eight
successive series of two beep tones
will sound to remind you to return the
display to its closed position by
pressing l on the display unit. After
the beep tones COMAND returns the
display unit to its closed position.
209_MY09_A_US.book Seite 58 Montag, 26. Mai 2008 6:12 18

61 Audio
CD operation


CD operation
Playback locations for audio CDs are:
the CD drive in the COMAND

the CD changer.
CD driveCD changer
In the Audio menu
( page
46)
, press
the
CD
or the
CD
soft key.
CD changer main menu1CD number or name of the CD currently
playing2Track number or name of the track
currently playing 3CD
- CD changer
CD
- CD drive
Actual track number/max. track
number on CD and elapsed playback
time
4Symbol for inserted CD
Switching to CD operationiThe CD drive is located behind of the
display unit
( page
57)
.
iThe CD changer can accomodate up to
6 audio or MP3 CDs. The CD changer is
located in the glove box.If a CD changer is connected to the
COMAND, the
CD
soft key is
available.
iThe
Magaz.
soft key is only assigned
when the CD changer is active.
If the CD changer has already read the
magazine, the Magazine menu will
appear
( page
64)
when you press the
Magaz.
soft key.
Otherwise the message
Magazine scan
Please wait
will appear first.
209_MY09_A_US.book Seite 61 Montag, 26. Mai 2008 6:12 18

62 AudioCD operationCD drive
Activate the Audio menu
( page
46)
.

Press the
CD
soft key
.
The CD main menu is displayed. If no audio CD has been inserted, the
message
No CD inserted
will appear.

Load an audio CD into the CD drive ( page
56)
.
CD main menu
CD changer
Activate the Audio menu
( page
46)
.

Press the
CD
soft key
.
The CD changer main menu will
appear. The CD last played is played
back.
CD changer main menu

If the last played CD is not available, the
next available audio CD or MP3 CD is
played back.No CD in the magazine:The message
Magazine empty
will appear.

Load audio CDs into the CD changer ( page
59)
.
Switching on
iThe name of the CD and the name of
the track played are displayed if the
information is available.iThe
CD
soft key is available if a CD
changer is connected to the COMAND.
iThe name of the CD and the name of
the track played are displayed if the
information is available.
209_MY09_A_US.book Seite 62 Montag, 26. Mai 2008 6:12 18

63 Audio
CD operation
You can select an audio or MP3 CD:
in the CD list
( page
63)

with the number keypad
( page
63)

in the magazine menu
( page
64)
In the CD list
The CD list includes all loaded CDs. Only
one list entry is visible at a time.The entry is displayed above the track
indication. It shows the number of the CD
currently playing.

Push the joystick to H or h to
select another CD from the list.Loading CD
is displayed.
After the CD is loaded, playback
begins.
With the number keypad
Selecting a CD (CD changer only)iSelection is possible if the

CD changer has loaded the magazine
(COMAND knows the position of filled
and empty slots) and at least two audio
or MP3 CDs are loaded.
iThe number keys 1 - 6 can be used
for direct selection.Keys
1 - 6
magazine slots 1 to 6
of the CD changer
209_MY09_A_US.book Seite 63 Montag, 26. Mai 2008 6:12 18

64 AudioCD operation
Press a number key, e.g. 2 to select
the corresponding CD.Loading CD 2
is displayed.
The CD is changed. The selected CD is
played back.The message
No CD
will
appear if a selected slot is empty.
In the Magazine menu
Press the
Magaz.
soft key.
The Magazine menu is displayed. If the
magazine has not been read in, the
message
Magazine scan

Please wait
is displayed first.

Push the joystick to g or G to
select a CD.

Press E.
or
Press one of the number keys 1 to
6.The CD is changed. The message Loading CD
will appear.
You can select a track:
with g or h
( page
64)

with the joystick
( page
65)

with the number keypad
( page
65)

with CD track scan
( page
66)
With g or h
Activate the main CD menu ( page
61)
.
Next track
Press h.The next track is played.
iThe name of the CD instead of e.g.
CD1

is displayed if the information is
available.
Track select
209_MY09_A_US.book Seite 64 Montag, 26. Mai 2008 6:12 18