language MERCEDES-BENZ CLK COUPE 2006 C209 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2006, Model line: CLK COUPE, Model: MERCEDES-BENZ CLK COUPE 2006 C209Pages: 489
Page 144 of 489
143 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1 or as soon as the
KEYLESS-GO* start/stop button is in
position1. The control system enables you
to
call up information about your vehicle
change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
The control system relays information to
the multifunction display.
iThe displays for the audio systems (ra-
dio, CD player etc.) will appear in En-
glish, regardless of the language
selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his /her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions
permit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approxi-
mately 14 m) every second.
Page 155 of 489
154 Controls in detailControl systemThe table below shows what settings can
be changed within the various menus. Detailed instructions on making individual
settings can be found on the following
pages.INSTRUMENT CLUSTER
TIME/Date
LIGHTING
VEHICLE
CONVENIENCE
Selecting speedometer
display mode
Setting time (hours)
Setting daytime running
lamp mode (USA only)
Setting automatic lock-
ing
Activate easy-entry/exit
feature
Selecting language
Setting time (minutes)
Setting locator lighting
Setting parking position for
exterior rear view mirror
Selecting display (speed
display or outside
temperature) for status
indicator
Setting the date (month)
Exterior lamps delayed
shut-off
Selecting display (speed
display or outside tem-
perature) for standard
display
Setting the date (day)
Interior lighting delayed
shut-off
Setting the date (year)
Page 156 of 489
155 Controls in detail
Control system
Instrument cluster submenu
Access the
Instr. cluster
submenu via
the
Settings
menu. Use the
Instr. clus-
ter
submenu to change the instrument
cluster display settings.
The following functions are available:Selecting speedometer display mode
Move the selection marker with
buttonæ orç to the Instr. cluster
submenu.
Press buttonj ork repeatedly
until the message
Display unit
Speed-/odometer appears in the
multifunction display.
The selection marker is on the current
setting.
Press buttonæ or ç to set
speedometer unit to
km or
miles
.Selecting language
Move the selection marker with
buttonæ orç to the Instr. cluster
submenu.
Press buttonj ork repeatedly
until the message
Language
appears in
the multifunction display.
The selection marker is on the current
setting.
Function
Page
Selecting speedometer display
mode
155
Selecting language
155
Selecting display (speed display
or outside temperature) for
status line
156
Selecting display (speed display
or outside temperature) for
standard display
156
Page 157 of 489
156 Controls in detailControl system
Press buttonæ orç to select
the language to be used for the
multifunction display messages.
Available languages:
German (
Deutsch
)
English (
English
)
French (
francais
)
Italian (
italiano
)
Spanish (
Español
)
Dutch (
Nederlands
)
Danish (
Dansk
)
Swedish (
Svenska
)
Portuguese (
Português
)
Turkish (
Türkçe
)Selecting display (speed display or out-
side temperature) for status line
Move the selection marker with
buttonæ orç to the Instr. cluster
submenu.
Press buttonj ork repeatedly
until the message
Status line dis-
play
appears in the multifunction
display.
The selection marker is on the current
setting.
Press buttonæ orç to select
the desired setting.Selecting display (speed display or out-
side temperature) for standard display
Move the selection marker with
buttonæ orç to the Instr. cluster
submenu.
Press buttonj ork repeatedly
until the message
Basic display
appears in the multifunction display.
The selection marker is on the current
setting.
Press buttonæ orç to select
the display mode shown in the basic
display.
iYou will see the status line when you
have called up a different display from
the standard display.
Page 477 of 489
476 IndexKey, SmartKey with KEYLESS-GO*
Changing batteries 411
KEYLESS-GO* 103, 463
Batteries in SmartKey 108
Battery check lamp, SmartKey 107
Factory setting 106, 108
Ignition 36
Important notes 104
Lock button 60
Locking/unlocking 33, 60, 103
Locking/unlocking,
Global setting 106
Locking/unlocking, Global
with lock button on trunk lid 109
Locking/unlocking,
Selective setting 107
Loss of key 110
Messages in display 390
Remote control 103
Start / stop button 35
Starting the engine 49
Turning off the engine 58
Unlocking/opening trunk lid 109
Kickdown 174, 463
Kilopascal 343L
Labels 442
Certification 442
Emission control information 442
Vacuum line routing diagram 442
Lamp sensor see Light sensor
Lamps, exterior 412
Light sensor 392
Messages in display 391–395
Lamps, indicator and warning
ABS 25, 360
Battery (SmartKey) 101, 107
Brakes 25, 361
Center console 368–369
CHECK ENGINE 362, 363
Coolant 364
Coolant temperature 25, 141
Distance warning 25
Engine diagnostics 362, 363
Engine malfunction 25, 362, 363
ESP
®
25, 365
Fog lamps 134
Front passenger front air bag off 68
Front passenger front
air bag off indicator lamp 368
Fuel reserve 25, 365High beam headlamp 25
Instrument cluster 360–367
Low beam headlamps 25
Parktronic system* warning
indicators (Canada only) 260
Seat belt telltale 25, 71, 366
SRS 25, 63, 367
Turn signals 25
Language, Setting 155
LATCH-type child seat anchors see
Children in the vehicle
License plate lamps
Messages in display 392
Replacing bulbs 413, 417
Light alloy wheels, cleaning 356
Light sensor
Messages in display 392
Lighter see Cigarette lighter
Lighting, Exterior and interior 131
Limp-Home Mode 179
Loading
Ski sack* (Canada only) 263
Loading see Vehicle loading
Loading the vehicle 320
Locator lighting 133, 161
Page 478 of 489
477 Index
Lock buttons
Door handle (KEYLESS-GO*) 60, 107
Trunk lid (KEYLESS-GO*) 109
Lock knob 463
Loss of keys 102, 110
Loss of Service and
Warranty Information Booklet 441
Low beam headlamps
Indicator lamp 25
Messages in display 393
Replacing bulbs (Bi-Xenon*) 412
Replacing bulbs (Halogen) 412, 414
Switching on 25, 52
Lubricants 452M
Maintenance 12, 348
Calling up service indicator 349
Clearing service indicator 349
FSS (Canada vehicles) 348
Maintenance System
(U.S. vehicles) 348
Resetting service indicator 350
Service indicator 348
Service term exceeded 349
Maintenance system
(U.S. vehicles) 348, 463
Manual headlamp mode see Headlamps
MAXCOOL maximum cooling 202
Maximum load rating, Tires 343
Maximum loaded vehicle weight,
Tire inflation pressure 343
Maximum tire inflation pressure 343
Mechanical key 404
Memory function see Seats, Power
Menus see Control system menus
Microphone, Hands-free 29
Minispare wheel see Spare wheelMirrors
Adjusting 43
Antiglare position 180
Auto-dimming 181
Exterior rear view mirror,
Parking position 130, 164, 182
Exterior rear view mirrors 43
Interior rear view mirror 43
MOE see MOExtended
MOE tires see MOExtended system*
MOExtended463
MOExtended system* 425
MON 306, 463
Motor Octane Number see MON
Multicontour seat* see
Seats, Multicontour*
Multifunction display 144, 464
Changing settings see
Control system menus and
Control system submenus
Displaying gear range 175
Selecting language 155
Symbol messages 382–397
Text messages 372–380