language MERCEDES-BENZ CLK350 2006 C209 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2006, Model line: CLK350, Model: MERCEDES-BENZ CLK350 2006 C209Pages: 514
Page 140 of 514
139 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1 or as soon as the
KEYLESS-GO* start/stop button is in
position1. The control system enables you
to
call up information about your vehicle
change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
The control system relays information to
the multifunction display.
iThe displays for the audio systems
(radio, CD player etc.) will appear in En-
glish, regardless of the language se-
lected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his /her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions
permit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approxi-
mately 14 m) every second.
Page 151 of 514
150 Controls in detailControl systemThe table below shows what settings can
be changed within the various menus. Detailed instructions on making individual
settings can be found on the following
pages.INSTRUMENT CLUSTER
TIME/DATE
LIGHTING
VEHICLE
CONVENIENCE
Selecting speedometer
display mode
Setting time (hours)
Setting daytime running
lamp mode (USA only)
Setting automatic lock-
ing
Activate easy-entry/exit
feature
Selecting language
Setting time (minutes)
Setting locator lighting
Setting parking position for
exterior rear view mirror
Selecting display (speed
display or outside
temperature) for the
status line
Setting the date (month)
Exterior lamps delayed
shut-off
Selecting display (speed
display or outside tem-
perature) for standard
display
Setting the date (day)
Interior lighting delayed
shut-off
Setting the date (year)
Page 152 of 514
151 Controls in detail
Control system
Instrument cluster submenu
Access the
Instr. cluster
submenu via
the
Settings
menu. Use the
Instr. clus-
ter
submenu to change the instrument
cluster display settings.
The following functions are available:Selecting speedometer display mode
Move the selection marker with
buttonæ orç to the Instr. cluster
submenu.
Press buttonj ork repeatedly
until the message
Display unit
Speed-/odometer appears in the multi-
function display.
The selection marker is on the current
setting.
Press buttonæ or ç to set
speedometer unit to
km or
miles
.Selecting language
Move the selection marker with
buttonæ orç to the Instr. cluster
submenu.
Press buttonj ork repeatedly
until the message
Language
appears in
the multifunction display.
The selection marker is on the current
setting.
Function
Page
Selecting speedometer display
mode
151
Selecting language
151
Selecting display (speed display
or outside temperature) for the
status line
152
Selecting display (speed display
or outside temperature) for
standard display
152
Page 153 of 514
152 Controls in detailControl system
Press buttonæ orç to select
the language to be used for the
multifunction display messages.
Available languages:
German (
Deutsch
)
English (
English
)
French (
francais
)
Italian (
italiano
)
Spanish (
Español
)
Dutch (
Nederlands
)
Danish (
Dansk
)
Swedish (
Svenska
)
Portuguese (
Português
)
Turkish (
Türkçe
)Selecting display (speed display or out-
side temperature) for the status line
Move the selection marker with
buttonæ orç to the Instr. cluster
submenu.
Press buttonj ork repeatedly
until the message
Status line dis-
play
appears in the multifunction
display.
The selection marker is on the current
setting.
Press buttonæ orç to select
the desired setting
.
Selecting display (speed display or out-
side temperature) for standard display
Move the selection marker with
buttonæ orç to the Instr. cluster
submenu.
Press buttonj ork repeatedly
until the message
Basic display
appears in the multifunction display.
The selection marker is on the current
setting.
Press buttonæ orç to select
the display mode shown in the basic
display.
iYou will see the status line when you
have called up a different display from
the standard display.
Page 503 of 514
502 Index
Fuel reserve 25, 379
High beam headlamp 25
Instrument cluster 374–380
Low beam headlamp 25
Maintenance service 361
Parktronic system*
warning indicators 271
Roll bar 379
Seat belt telltale 25, 71, 379
Seat belts 379
SRS 25, 63, 380
Turn signals 25
Language, Setting 151
LATCH-type child seat anchors see
Children in the vehicle
License plate lamps
Messages in display 405
Replacing bulbs 439, 443
Light alloy wheels, cleaning 370
Light sensor see Lamp sensor
Lighter see Cigarette lighter
Lighting, Exterior and interior 127
Limp Home Mode 180
Loading
Ski sack* (Canada only) 273
Loading see Vehicle loadingLoading the vehicle 333
Locator lighting 129, 157
Lock buttons
Door handle (KEYLESS-GO*) 60, 104
Trunk lid (KEYLESS-GO*) 106
Lock knob 489
Locking 60
Loss of keys 100, 106
Loss of Service and
Warranty Information Booklet 467
Low beam headlamps
Indicator lamp 25
Messages in display 406
Replacing bulbs (Bi-Xenon*) 438
Replacing bulbs (Halogen) 438, 440
Switching on 52
Lubricants 479
Luggage cover 262
Folding back 273
M
Maintenance 12, 361
Calling up service indicator 362
Clearing service indicator 362
FSS (Canada vehicles) 361
Maintenance System
(U.S. vehicles) 361Resetting service indicator 363
Service indicator 361
Service term exceeded 362
Maintenance system
(U.S. vehicles) 361, 489
Manual headlamp mode see Headlamps
Manual shift program 178
MAXCOOL maximum cooling 202
Maximum load rating, Tires 356
Maximum loaded vehicle weight,
Tire inflation pressure 356
Maximum tire inflation pressure 356
Mechanical key 419
Memory function see Seats, Power
Menus see Control system menus
Microphone, Hands-free 29
Minispare wheel see Spare wheel
Mirrors
Adjusting 43
Antiglare position 181
Auto-dimming 182
Exterior rear view mirrors 43
Parking position 126, 161, 183
Interior rear view mirror 43
MOE see MOExtended
MOE tires see MOExtended system*
Page 504 of 514
503 Index
MOExtended490
MOExtended system* 452
MON 319, 489
Motor Octane Number see MON
Multicontour seat* see
Seats, Multicontour*
Multifunction display 140, 490
Changing settings see
Control system menus and
Control system submenus
Displaying gear range 171
Selecting language 151
Symbol messages 395–412
Text messages 385–393
Multifunction display messages 383
ABS 385
Battery 395
Brake fluid 396
Brake lamp 404
Brake pads 396
Check engine 397
Coolant 397–399
Display 400
Doors 400
Engine 397
Engine coolant 397–399Engine oil 323, 401
ESP
®
387, 388
Fog lamps 405
Front passenger
front air bag 389–392
Fuel cap 400
Fuel reserve tank 403
Gear selector lever 393
Headlamps 404–408
Hood 403
Key, SmartKey 403
KEYLESS-GO* 403
Lamp sensor 405
Lamps 404
Lamps, exterior 404–408
License plate lamp 405
Parking brake 396
Parking lamps 406
Roll bars 408
Seat belts 409
Soft top 410
SRS 409
Steering gear oil 410
Tele Aid 409
Telephone* 411
Trunk 412Turn signals 407
Windshield washer fluid 412
Multifunction
steering wheel 26, 140, 490
Button operation 140
N
Navigation system* 146
See separate
COMAND* operating instructions
Net, Parcel 280
Neutral gear position 168
New vehicle break-in 306
Night security illumination 129
Normal occupant weight 356
Number, vehicle identification (VIN) 468