Front seat lock MERCEDES-BENZ CLK550 2008 C209 Owner's Manual

Contents
Safety and Security........................... 63
Occupant safety................................... 64
Air bags .......................................... 65
Occupant Classification System ..... 72
Seat belts ....................................... 77
Active head restraints .................... 81
Roll bars (only CLK cabriolet) ......... 82
Children in the vehicle .................... 83
Blocking of rear
side window operation ................... 88
Panic alarm .......................................... 89
Activating ....................................... 89
Deactivating ................................... 89
Driving safety systems ......................... 90
ABS ................................................ 90
BAS ................................................ 92
ESP
®............................................... 92
Anti-theft systems................................ 97
Immobilizer..................................... 97
Anti-theft alarm system .................. 97
Controls in detail............................... 99
Locking and unlocking ....................... 100
SmartKey ..................................... 100
SmartKey with KEYLESS-GO* ...... 103
Checking the batteries in the
SmartKey or SmartKey with
KEYLESS-GO* .............................. 108
Loss of the SmartKey or
SmartKey with KEYLESS-GO* ...... 109
Opening the doors from the inside 109
Opening the trunk ........................ 110
Closing the trunk.......................... 112
Trunk emergency release ............. 117
Valet locking ................................ 118
Automatic central locking ............ 118
Locking and unlocking
from the inside ............................. 119
Seats ................................................. 120
Front seat active head restraints . 120
Rear seat head restraints
(CLK coupe) ................................. 120
Rear seat head restraints
(CLK cabriolet) ............................. 123
Multicontour seat* ....................... 124
Seat heating* ............................... 125Seat ventilation* .......................... 126
Memory function ............................... 127
Storing positions into memory ..... 128
Recalling positions from memory . 128
Lighting ............................................. 129
Exterior lamp switch .................... 129
Combination switch ..................... 133
Corner-illuminating
front fog lamps* (With Bi-Xenon*
headlamps only)........................... 133
Hazard warning flasher ................ 135
Interior lighting ............................ 136
Door entry lamps ......................... 137
Trunk lamp ................................... 137
Instrument cluster ............................. 138
Adjusting instrument cluster
illumination .................................. 138
Coolant temperature indicator ..... 139
Resetting trip odometer ............... 139
Tachometer .................................. 140
Clock............................................ 140
Outside temperature indicator ..... 140
Control system .................................. 141
Multifunction display.................... 141
Multifunction steering wheel........ 142
Menus .......................................... 144

31 At a glance
Center console
Center console
Upper part
CLK coupe
ItemPage
1Seat heater*, driver’s side
Seat ventilation*, driver’s
side125
126
2Parktronic system* deacti-
vation switch (Canada all
vehicles, USA only CLK 63
AMG cabriolet)274
3Rear window sunshade*
switch (CLK coupe Canada
only)188
4ESP® control switch92
5Hazard warning flasher
on/off switch135
6Central unlocking switch
Central locking switch119
119
7Switch for folding
(CLK coupe) or lowering
(CLK cabriolet) rear seat
head restraints121
ItemPage
8Anti-theft alarm system
indicator lamp97
9Seat heater*,
passenger side
Seat ventilation*,
passenger side125
126
aFront passenger front air
bag off indicator lamp 76,
390
bAudio system,
or
COMAND* (see separate
operating instructions)151
cClimate control
Automatic climate control
Rear window defroster 190
200
189

44 Getting started
Adjusting
Folding backrests back
Fold and press the backrest rearward
until it engages in driving position.
The head restraint returns to its previ-
ous position.
For information on additional convenience
features permitting easy entry and exit,
see “Easy-entry/exit feature” (
page 45).
Steering wheel
iIn addition to the front seat backrests, the
front seat cushions can also be shifted forward
to permit easy access to the rear whenever the
seat is located in the rear half of its adjustment
range. Pivot backrest forward by pulling the re-
lease lever until the seat moves in a combined
forward and upward movement.
!When moving the seat, make sure there are
no items in the footwell or behind the seats. Oth-
erwise you could damage the seats.
Warning!G
The seat belts provide protection only with
the backrest locked in place. Therefore, the
backrest must be locked in place with the
vehicle in motion. Do not drive the vehicle
when the backrest is not locked in place.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle.
The power seats can also be operated with
the driver’s or passenger door open. Do not
leave children unattended in the vehicle or
with access to an unlocked vehicle. Unsu-
pervised use of vehicle equipment may
cause an accident and/or serious personal
injury.
Never place hands under seat or near any
moving parts during a seat adjustment
procedure.
Warning!G
Do not adjust the steering wheel while driv-
ing. Adjusting the steering wheel while driv-
ing could cause the driver to lose control of
the vehicle.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle.
Even with the SmartKey or SmartKey with
KEYLESS-GO* removed from the starter
switch, or the SmartKey with KEYLESS-GO*
removed from the vehicle, the steering
wheel adjustment feature can be operated
when the driver’s door is open. Therefore,
do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may
cause an accident and/or serious personal
injury.

51 Getting started
Driving
The seat belt presenter slides back:

right after you push the latch plate1
into buckle3 and hear it click.

after approximately 60 seconds if you
do not push latch plate 1 into
buckle3.

if your door is opened.

if you turn the SmartKey in the starter
switch to position 0.

if you release a front seat backrest and
fold it forward.
Starting the engine Automatic transmission
Gearshift pattern for automatic
transmission
PPark position with gear selector lever
lock
RReverse gear
NNeutral
DDrive position
For more information, see “Automatic
transmission” (
page 172).
Warning!G
The seat belt presenter must be retracted
while the vehicle is in motion. Only when the
seat belt presenter is retracted can the seat
belt be properly positioned on the body and
protect the occupant as intended.
Warning!G
Inhalation of exhaust gas is hazardous to
your health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause
unconsciousness and possible death.
Do not run the engine in confined areas
(such as a garage) which are not properly
ventilated. If you think that exhaust gas
fumes are entering the vehicle while driving,
have the cause determined and corrected
immediately. If you must drive under these
conditions, drive with at least one window
fully open.

106 Controls in detail
Locking and unlocking

with the starter switch position1,
the message:
Key Not Detected
appears in the multifunction display

with the engine running, the
message:
Key Not Detected
appears in the multifunction display
while driving off.
Find the SmartKey with KEYLESS-GO or
change its present location immediate-
ly (e.g. place it on the front passenger
seat or insert it in shirt pocket).

If you have started the engine with the
KEYLESS-GO start/stop button
(
page 39), you can turn it off again
with:

the KEYLESS-GO start/stop button

the SmartKey inserted in the starter
switch, when the gear selector le-
ver is in positionP

Remember that the engine can be
started by anyone with a SmartKey
with KEYLESS-GO that is left inside the
vehicle.
Possibility 1:
(One SmartKey with KEYLESS-GO in
the vehicle, one SmartKey with
KEYLESS-GO outside the vehicle):
If you leave the SmartKey with
KEYLESS-GO behind when exiting and
locking the vehicle, no message ap-
pears in the multifunction display.
Possibility 2:
(One SmartKey with KEYLESS-GO in
the vehicle, no SmartKey with
KEYLESS-GO outside the vehicle):
When exiting and trying to lock the ve-
hicle, the message
Key Detected In Vehicle
will appear in the multifunction display.
The vehicle will not be locked.Factory setting
Global unlocking
Pull an outside door handle (SmartKey
with KEYLESS-GO must be near this
door).

All turn signal lamps flash once.

An acoustic signal sounds once.

The locking knobs in the doors
move up.

The anti-theft alarm system is dis-
armed.
iWhen unlocking or locking the vehicle with
the SmartKey with KEYLESS-GO an acoustic sig-
nal sounds. The acoustic signal is activated at
the factory. If you wish to deactivate the feature,
or adjust its signal volume, contact an authorized
Mercedes-Benz Center.

122 Controls in detail
Seats
Placing rear head restraints upright
Pull the rear head restraint forward un-
til it locks into position.
Head restraint tilt
Two different head restraint angle
positions are available.
Press the release button (page 121)
and tilt the head restraint to the
desired position.
Removing and installing rear seats
head restraints
1Release button
Removing rear seat head restraints
Fold back head restraint (page 121).
Pull head restraint to its highest
position.
Push release button1 and pull out
head restraint.
Installing rear head restraints
Insert head restraint and push it down
until it engages.
Push release button1 and adjust
head restraint to desired position.
Warning!G
Make sure the head restraints engage when
placing them upright. Otherwise their pro-
tective function cannot be assured.
iAdjust the head restraint in such a way that
it is as close to the head as possible.
Warning!G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an
accident.
Do not interchange head restraints from
front and rear seat.

266 Controls in detail
Soft top (Cabriolet)
Fold retaining lugs6 out.
Slide pre-assembled wind screen into
mounting fixture on right side7 using
retaining pin on right side. Simulta-
neously, retaining lugs6 should slide
into seat belt passage in rear bench
seat.
Pull catch8 in position9 and guide
left retaining pin into mounting fixture
on left side.
Fold upper section of wind screen up
toward head restraints until it stops.Removing
Fold upper section of wind screen back
down.
Pull catch8 in position10 and pull
wind screen out toward front of vehi-
cle. Be careful not to damage interior
trim with guide tabs.
Fold retaining lugs6 back.
bCatch
Press catch b to the right and fold up-
per and lower sections back.
Place the wind screen back into the
bag.
6Retaining lugs
7Mounting fixture on right side
8Catch
9Locking
10Unlocking
Warning!G
Check for secure locking by pulling up on
the wind screen.
To prevent personal injury, remove wind
screen if rear seats are to be occupied by
passengers.


283 Controls in detail
Loading
Loading instructions
The total load weight including vehicle oc-
cupants and luggage/cargo should not ex-
ceed the load limit indicated on the
corresponding Tire and Loading Informa-
tion placard located on the driver’s door
B-pillar (
page 334).
The handling characteristics of a fully load-
ed vehicle depend greatly on the load dis-
tribution. It is therefore recommended to
load the vehicle according to the illustra-
tions shown, with the heaviest items being
placed towards the front of the vehicle.Always place items being carried against
front or rear seat backrests, and fasten
them as securely as possible.
The heaviest portion of the cargo should al-
ways be kept as low as possible since it in-
fluences the handling characteristics of
the vehicle.
Warning!G
If a red indicator is visible with the backrest
up, then the backrest is not properly locked
into position.
Always lock backrest in its upright position
when rear seat bench is occupied, or the ex-
tended trunk compartment is not in use.
Check for secure locking by pushing and
pulling on the backrest.
In an accident, during hard braking or sud-
den maneuvers, loose items will be thrown
around inside the vehicle, and cause injury
to vehicle occupants unless the items are
securely fastened in the vehicle.
To help avoid personal injury during a colli-
sion or sudden maneuver, exercise care
when transporting cargo.
iTo prevent unauthorized persons from ac-
cess to the trunk, always lock backrest in its up-
right position.
!CLK cabriolet:
To prevent damage to the soft top or lug-
gage/cargo when lowering the roof:

load trunk only to the height of the luggage
cover

do not permit luggage/cargo to push up the
closed luggage cover

do not place anything on the shelf behind the
roll bar

do not place anything on the soft top com-
partment cover

459 Practical hints
Flat tire
Lifting the vehicle
Prevent the vehicle from rolling away
by blocking wheels with wheel chocks
or other sizeable objects.
One wheel chock is included with the
vehicle tool kit (
page 422).
When changing wheel on a level surface:
Place the wheel chock in front of and
another sizeable object behind the
wheel that is diagonally opposite to the
wheel being changed.
Always try lifting the vehicle using the jack
on a level surface. However, should
circumstances require you to do so on a
hill, place the wheel chock and the other
sizeable object as follows:
Place the wheel chock and another
sizeable object on the downhill side
blocking both wheels of the axle not
being worked on.1Wheel wrench
On wheel to be changed, loosen but do
not yet remove the wheel bolts
(approximately one full turn with
wrench 1).
The jack take-up brackets are located
directly behind the front wheel housings
and in front of the rear wheel housings.
Warning!G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use,
especially on hills. Always try to use the jack
on level surface. Make sure the jack arm is
fully seated in the jack take-up bracket.
Always lower the vehicle onto sufficient
capacity jackstands before working under
the vehicle.

499 Index
C
California retail buyers and
lessees, Important notice for 11
Call priority (Tele Aid) 300
Can holder see Cup holder
Capacities and
recommended fuels/lubricants 489
Cargo area see Trunk
Cargo tie-down rings 284
Carpets, cleaning 375
Catalytic converter 318
CD changer* 229
MP3 230
CD player 229
Control system 152
Center console 31
Lower part 32
Upper part 31
Central locking
Automatic 118, 166
Locking/unlocking from inside 119
Central locking switch 119
Certification label 478
Certification label, examples 478
Charcoal filter 209Checking tire pressure electronically
Tire Pressure Monitoring System
(TPMS), (USA only) 344
Children in the vehicle 83
Air bags 83
Blocking
rear side window operation 88
Front passenger front
air bag off indicator lamp 76
Infant and
child restraint systems 77, 83, 86
LATCH-type child seat anchors 87
Occupant Classification System
(OCS) 72
Cigarette lighter 290
Climate control
see Climate control system
Climate control system
Air conditioning refrigerant 491
Air conditioning, Cooling 198, 210
Air distribution 194, 205
Air recirculation mode 196, 207
Air vents 199, 212
Air volume 194, 195, 206
Charcoal filter 209Control panel,
Automatic climate control 201
Deactivating/Reactivating 193, 203
Defogging 206
Defrosting 206
Defrosting, rear window 189
Front defroster 195
MAXCOOL 207
Residual engine heat
and ventilation* (REST*) 211
Temperature 194, 204
Clock 29, 140, 160
Setting time 160
Cockpit 26
Cold tire inflation pressure 358
Collapsible wheel chock 422, 424
COMAND* see separate
COMAND operating instructions
Combination switch 55, 133
Control system 141
Functions 143, 145
Multifunction display 141
Multifunction steering wheel 142
Resetting to factory default 155