low beam MERCEDES-BENZ CLS 2014 User Guide

[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2014, Model line: CLS, Model: MERCEDES-BENZ CLS 2014
Pages: 382, PDF Size: 4.7 MB

Load previous 10 pages

Page 124 of 382

MERCEDES-BENZ CLS 2014 User Guide You can use this function to set the
headlamps to change betweenlow beam and
high beam automatically. The system
recognizes vehicles with their lights on, either
approaching from the opposite directio

You can use this function to set the
headlamps to change betweenlow beam and
high beam automatically. The system
recognizes vehicles with their lights on, either
approaching from the opposite direction or
traveling in front of your vehicle, and
consequently switches the headlamps from
high beam to low beam.
The system automatically adapts the low-
beam headlamp range depending on the
distance to the other vehicle. Once the
system no longer detectsany other vehicles,
it reactivates the high-beam headlamps.
The system's optical sensor is located behind
the windshield near the overhead control
panel.
Switching Adaptive Highbeam Assist
on/off
High-beam headlamps
Turn signal, right
$High-beam flasher
!Turn signal, left
XTo switch on:turn the light switch to
\r.
XPress the combination switch beyond the
pressure point in the direction of
arrow.
Theindicator lamp in the
multifunction display lights up if it is dark
and the light sensor activates the low-beam
headlamps.
If you are driving at speeds above
approximately 28 mph (45 km/h):
The headlamp range is set automatically
depending on the distance between the
vehicle and other road users.
If you are driving at speeds above
approximately 35 mph (55 km/h) and no
other road users have been detected:
The high-beam headlamps are switched on
automatically. Theindicator lamp in
the instrument cluster also lights up.
If you are driving at speeds below
approximately 30 mph (45 km/h) or other
road users have been detected or the roads
are adequately lit:
The high-beam headlamps are switched off
automatically. Theindicator lamp in
the instrument cluster goes out. The
indicator lamp in the multifunction display
remains lit.
XTo switch off:move the combination
switch back to its normal position or move
the light switch to another position.
Theindicator lamp in the instrument
cluster goes out.
Headlamps fogged up on the inside
The headlamps may fog up on the inside if
there is high atmospheric humidity.
XSwitch on the light and drive off.
The level of moisture diminishes,
depending on the length of the journey and
the weather conditions (humidity and
temperature).
If the level of moisture does not diminish:
XHave the headlamps checked ataqualified
specialist workshop.
122Exterior lighting
Lights and windshield wipers

Page 206 of 382

MERCEDES-BENZ CLS 2014 User Guide Warning and display messages in the
multifunction display
XActivate ATTENTION ASSIST using the on-
board computer (Ypage228).
If ATTENTION ASSIST is active, you willbe
warned no sooner than 20 minutes

Warning and display messages in the
multifunction display
XActivate ATTENTION ASSIST using the on-
board computer (Ypage228).
If ATTENTION ASSIST is active, you willbe
warned no sooner than 20 minutes after
yourjourney has begun. You then hear an
intermittent warning tonetwice and the
Attention Assist:Drowsiness
detectedmessage appears in the
multifunction display.
XIf necessary, takeabreak.
XPressthebutton to confirmthe
message.
On longjourneys, takeregular breaksingood
timetoallow yourself to rest properly. If you
do not takeabreak,you will be warned again
after 15 minutes at theearliest. The
preconditionfor this is that
ATTENTION ASSIST still detectstypical
indicators of fatigue or increasing lapses in
concentration.
When ATTENTION ASSIST is deactivated, the
symbol and OFF appear in the
multifunction display in the assistance
graphics display when the engine is running.
ATTENTION ASSIST is reset when you
continue your journey and startsassessing
your tiredness again if:
Ryou switch off the engine.
Ryou take off your seat belt and open the
driver's door, e.g. forachange of drivers or
to takeabreak.
Night View Assist Plus
Important safety notes
Night View Assist Plus is only an aid and is not
asubstitute for attentive driving. Do not rely
on the Night View Assist Plus display.You are
responsible for the distance to the vehicle in
front,for vehicle speed and for braking in
good time. Drive carefully and always adapt
your driving style to suit the prevailing road
and traffic conditions.
The system may be impaired or may not
function if:
Rthere is poor visibility, e.g. due to snow,
rain, fog or spray
Rthe windshield is dirty, fogged up or
covered, for instance byasticker, in the
vicinityofthe camera
Ron bends, on uphill gradients or downhill
gradients
Pedestrian recognition may be impaired or
inoperative if:
Rpedestrians are partially or entirely
obscured by objects, e.g. parked vehicles
Rthe silhouette of the pedestrian in the Night
View Assist Plus display is incompleteor
interrupted, e.g. by powerful light
reflections
Rpedestrians do not contrast adequately
from the background
Rpedestrians are not in an upright position,
e.g. sitting, squatting or lying
In addition to the illumination provided by the
normal headlamps, Night View Assist Plus
uses infrared light to illuminate the road.
Night View Assist Plus camerapicks up
the infrared light and displaysamonochrome
image in COMAND. The image displayed in
COMAND corresponds toaroad lit up by high-
beam headlamps. This enables you to see the
road's course and any obstacles in good time.
If pedestrian recognition is activated,
pedestrians recognized by the system are
204Driving systems
Driving and parking

Page 224 of 382

$MERCEDES-BENZ CLS 2014 User Guide Text field�shows the selected menu or submenu as well as display messages. The following messages may appear in the multifunction display: �\nShift recommendation (Ypage 161) �� Active Parking Ass$

Page 234 of 382

MERCEDES-BENZ CLS 2014 User Guide switch-off exterior lighting are on, the
following light up:
RParking lamps
RLow-beam headlamps
RDaytime running lamps
RSide marker lamps
RSurround lighting in the exterior mirrors
Activating/deactiva

switch-off exterior lighting are on, the
following light up:
RParking lamps
RLow-beam headlamps
RDaytime running lamps
RSide marker lamps
RSurround lighting in the exterior mirrors
Activating/deactivating the interior
lighting delayed switch-off
If you activate theInterior Lighting
Delayfunction,the interior lighting remains
on for 20seconds after you remove the
SmartKey from the ignition lock.
XPress the\norbutton on the
steering wheel to select theSett.menu.
XPress theorbutton to select the
Lightssubmenu.
XPressto confirm.
XPressorto select theLight.
Delayfunction.
When theInterior Lighting Delay
function is activated, the vehicle interior is
displayed in red in the multifunction
display.
XPress thebutton to save the setting.
Vehicle
Activating/deactivating the automatic
door locking mechanism
XPress the\norbutton on the
steering wheel to select theSett.menu.
XPressorto select theVehicle
submenu.
XPressto confirm.
XPressorto select theAuto.
Door Locksfunction.
When theAutomaticDoorLockfunction
is activated, the vehicle doors are displayed
in red in the multifunction display.
XPress thebutton to save the setting.
If you activate theAutomatic Door Lock
function,the vehicle is centrally locked above
aspeed of around9mph (15 km/h).
For further information on the automatic
locking feature, see (Ypage 83).
Activating/deactivating the acoustic
locking verification signal
If you switch on theAcousticLockfunction,
an acoustic signal sounds when you lock the
vehicle.
XPress the\norbutton on the
steering wheel to select theSett.menu.
XPressorto select theVehicle
submenu.
XPressto confirm.
XPress theorbutton to select the
Acoustic Lockfunction.
If theAcousticLockfunction is activated,
thesymbol in the multifunction
displaylights up red.
XPress thebutton to save the setting.
Activating/deactivating the radar sensor
system
XPress the\norbutton on the
steering wheel to select theSett.menu.
XPressorto select theVehicle
submenu.
XPressto confirm.
XPress theorbutton to select
Radar Sensor (See Oper. Manual):.
You will see the selected setting:Enabled
orDisabled.
XPress thebutton to save the setting.
The following systems are switched off when
the radar sensor system is deactivated:
RDISTRONIC PLUS (Ypage 177)
RBAS PLUS (Ypage 67)
RPRE-SAFE®Brake (Ypage 72)
RBlind Spot Assist (Ypage 207)
RActive Blind Spot Assist (Ypage 211)
232Menus and submenus
On-board computer and displays

Page 247 of 382

MERCEDES-BENZ CLS 2014 User Guide Display messagesPossible causes/consequences and�Solutions
Operator'sManualdisplay messagesmustnot be shown in
the multifunction display.
XWait foraperiod of at least 60 seconds until the necessa

Page 250 of 382

MERCEDES-BENZ CLS 2014 User Guide Display messagesPossible causes/consequences and�Solutions
Adaptive Highbeam
Assist Inoperative
Adaptive Highbeam Assistisfaulty.
XVisitaqualified specialist workshop.
Adaptive Highbeam
Assist Curren

Page 266 of 382

MERCEDES-BENZ CLS 2014 User Guide Display messagesPossible causes/consequences and�Solutions
�
Remove 'Start'
Button and Insert
Key
The KEYLESS-GO keycan continuouslynotbe detected.
KEYLESS-GO is temporarily malfunctioningor

Page 275 of 382

$MERCEDES-BENZ CLS 2014 User Guide Engine ProblemPossible causes/consequences and� Solutions �\n The yellow Check Enginewarning lamp lightsupwhile the engineisrunning. Theremay beamalfunction, for example: Rin theenginemanagement Rin t$

Engine
ProblemPossible causes/consequences andSolutions
\n
The yellow Check
Enginewarning lamp
lightsupwhile the
engineisrunning.
Theremay beamalfunction, for example:
Rin theenginemanagement
Rin thefuel injection system
Rin theexhaust system
Rin theignition system
Rin thefuel system
The emission limit values may be exceeded and theenginemay
be runninginemergencymode.
XHavethevehicle checked as soon as possible ataqualified
specialist workshop.
iIn somestates, you must immediately visitaqualified
specialist workshopassoon as theyellow CheckEngine warning
lamp lights up.This is due to the legal requirements in effect in
these states. If in doubt, check whether such legal regulations
apply in the state in which you are currently driving.

The yellow reserve fuel
warning lamp lights up
while the engine is
running.
The fuel level has dropped into the reserve range.
XRefuel at the nearest gas station.

The yellow reserve fuel
warning lamp flashes
while the vehicle is in
motion.
In addition, the\n
Check Enginewarning
lamp may light up.
The fuel system pressure is too low. The fuel filler cap is not closed
correctly or the fuel system is leaking.
XCheck that the fuel filler cap is correctly closed.
XIf the fuel filler cap is not correctly closed:close the fuel filler
cap.
XIf the fuel filler cap is closed:visitaqualified specialist
workshop.

The red coolant
warning lamp lights up
while the engine is
running and the coolant
temperature gauge is
at the start of the scale.
The temperature sensor for the coolant temperature gauge is
defective.
The coolant temperature is no longer being monitored. There is a
risk of engine damage if the coolant temperature is too high.
XPull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions. Do not continue
driving under any circumstances.
XSecure the vehicle against rolling away (Ypage 167).
XConsultaqualified specialist workshop.
Indicator and warning lampsinthe instrument cluster273
On-board computer and displays
Z

Page: < prev 1-10 11-20