seat memory MERCEDES-BENZ CLS 2014 User Guide

XAdjust the seat(Ypage 100).
XOn the driver'sside, adjust the steering
wheel (Ypage 106)and the exteriormirrors
(Ypage 109).
XPress memory buttonMand one of the
storage position buttons1,2or3within
three seconds.
The settings are stored in the selected
presetposition.Atone sounds when the
settings have been completed.
Calling upastoredsetting
XPressand hold therelevant storage
position button1,2or3until theseat,
steeringwheel and exteriormirrors are in
the stored position.
iThe settingprocedure is interrupted as
soon as you release the storage position
button.
Memory function113
Seats, steering wheel and mirrors
Z

Convenience
Activating/deactivatingtheEASY-
ENTRY/EXIT feature
GWARNING
When theEASY-ENTRY/EXIT feature adjusts
thesteering wheel,you and other vehicle
occupants–particularly children–could
become trapped. There isarisk of injury.
While the EASY-ENTRY/EXIT feature is
making adjustments, make sure that no one
has any body parts in the sweep of the
steering wheel.
If somebody becomes trapped:
Rpress one of the memory function position
buttons, or
Rmove the switch for steering wheel
adjustmentinthe opposite direction to that
in which the steering wheel is moving.
The adjustment process is stopped.
XPress the\norbutton on the
steering wheel to select theSettings
menu.
XPress theorbutton to select the
Conveniencesubmenu.
XPressto confirm.
XPress theorbutton to select the
Easy Entry/Exit:function.
If theEasy Entry/Exitfunction is
activated, the vehicle steering wheel is
displayed in red in the multifunction
display.
XPress thebutton to save the setting.
Further information on the EASY-ENTRY/EXIT
feature (Ypage 108).
Switching the belt adjustment on/off
XPress the\norbutton on the
steering wheel to select theSett.menu.
XPress theorbutton to select the
Conveniencesubmenu.
XPressto confirm.
XPress theorbutton to select the
Belt Adjustmentfunction.
When theBelt Adjustmentfunction is
activated, the vehicle seat belt is displayed
in red in the multifunction display.
XPress thebutton to save the setting.
For further information on belt adjustment,
see (Ypage 57).
Switching the fold-in mirrors with the
locking featureon/off
This function is only available on vehicles with
the memory function (Ypage 112).
When you activate theAuto. Mirror
Foldingfunction, the exterior mirrors are
folded in when the vehicle is locked. If you
unlock the vehicle and then openadoor, the
exterior mirrors fold out again.
XPress the\norbutton on the
steering wheel to select theSett.menu.
XPress theorbutton to select the
Conveniencesubmenu.
XPressto confirm.
XPressorto select theAuto.
Mirror Foldingfunction.
If theAuto. Mirror Foldingfunction is
activated, the vehicle's exterior mirror is
displayed in red in the multifunction
display.
XPress thebutton to save the setting.
To fold the exterior mirrors in or out
If you have switched on theAuto. Mirror
Foldingfunction and you fold in the exterior
mirrors by pressing button,the exterior
Menus and submenus233
On-board computer and displays
Z

Stowage compartment in the rear seat
armrest
!Do not sit or lean your bodyweight on the
armrests when they are folded out as you
could damage them.
!Close the cover of the stowage
compartmentbefore folding the rear seat
armrest back intothe seat backrest.
XTo open:fold down seat armrest.
XFold coverof the armrest upwards.
Storage pockets
GWARNING
Storage bags are intended for storing light-
weight items only.
Heavy objects, objects with sharp edges or
fragile objects may not be transported in the
storage bag. In an accident, during hard
braking, or sudden maneuvers,they could be
thrown around inside the vehicle and cause
injurytovehicle occupants.
Storage bags cannot protecttransported
goods in the event of an accident.
The stowage pockets are on the back of the
driver's and front-passenger'sseats.
Stowage nets
Stowage netsare located in the front-
passenger footwell and on the right-hand side
of the trunk.
Observe the loading guidelines (Ypage 278)
and the safety notes regarding stowage
spaces (Ypage 278).
Rear bench seat through-loading
feature
Important safetynotes
GWARNING
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold
forwards, e.g. when brakingsuddenly or in the
event of an accident.
RThe vehicle occupantwould thereby be
pushed into the seat belt by the rear bench
seat/rear seat or by the seat backrest.The
seat belt can no longer offer the intended
level of protection and could even cause
injuries.
RObjectsorloads in the trunk cannot be
restrained by the seat backrest.
There is an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear seat
are engaged.
Observe the loading guidelines (Ypage 278).
The left-hand and right-hand rear seat
backrests can be folded down separately to
increase the trunk capacity.
Folding the seat backrest forward
iVehicles with memory function: when you
fold one or both parts of the rear seat
Stowage areas281
Stowage and features
Z

backrest forwards, the respective front
seat moves forward slightly, when
necessary, in order to avoid contact.
XVehicles without memoryfunction:if
necessary,movethe driver's or front-
passengerseat forwards.
XOpen the trunk.
XPull right-hand or left-hand rear seat
backrest release handle.
The correspondingrear seat backrest is
released.
XFold rear seat backrestforwards.
XMove the driver's or front-passenger seat
back if necessary.
Folding the seat backrest back
!Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be
damaged.
XMove the driver's or front-passenger seat
forward if necessary.
XFold rear seat backrestback until it
engages.
If the rear seat backrest is not engaged and
locked, this will be shown in the
multifunction display in the instrument
cluster.Awarning tone also sounds.
XMovethedriver'sorfront-passenger seat
back if necessary.
iYou should always engage therear seat
backrests if you do notneed the through-
loading feature. This will prevent
unauthorized access to the trunkfrom the
vehicle interior.
Securing cargo
Cargo tie-down rings
General notes
Observe the following notes on securing
loads:
RObserve the loading guidelines
(Ypage 278).
RSecure the load using the cargo tie-down
rings.
RDistribute the load on the cargo tie-down
rings evenly.
RDo not use elastic straps or netstosecure
aload, as these are only intended as an
anti-slip protection for light loads.
RDo not route tie-downs across sharp edges
or corners.
RPad sharp edges for protection.
282Stowage areas
Stowage and features