ECU MERCEDES-BENZ CLS 2014 Owner's Manual

Engaging drive position D
XWhen thevehicle is stationary, depress the
brakepedal.
XPush theDIRECT SELECT leverdown past
the first point of resistance.
Transmission positions
\rPark position
Do not shift the transmission into
positionP(Ypage 167) unless the
vehicle is stationary. The parking
lock should not be used asabrake
when parking. In addition to
engaging the parking lock, you
must always apply the parking
brake to secure the vehicle.
If the vehicle electronics are
malfunctioning, the transmission
may be locked in positionP.
Have the vehicle electronics
checked immediately ataqualified
specialist workshop.
Reverse gear
Only shift the transmission toR
when the vehicle is stationary.
Neutral
Do not shift the transmission toN
while driving. The transmission
could otherwise be damaged.
No power is transmitted from the
engine to the drive wheels.
Releasing the brakes will allow you
to move the vehicle freely, e.g. to
push it or tow it.
If ESP®is deactivated or faulty:
only shift the transmission to
positionNif the vehicle is in danger
of skidding, e.g. on icy roads.
!Rolling in neutralNcan damage
the drive train.
Drive
The automatic transmission
changes gear automatically. All
forward gears are available.
Changing gear
The automatic transmission shifts to the
individual gears automatically when it is in
transmission positionD.This automatic
gearshifting behavior is determined by:
Rashift range restriction, if selected
Rthe selected drive program (Ypage 159)
Rthe position of the accelerator pedal
Rthe road speed
Driving tips
AMG vehicles
When shifting down, the double-clutch
function is active regardless of the currently
selected drive program. The double-clutch
function reduces load change reactions and
is conducive toasporty driving style. The
sound generated by the double-clutch
function depends on the drive program
selected.
158Automatic transmission
Driving and parking

When leaving the vehicle, alwaystake the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
!Always secure the vehicle correctly
against rolling away.Otherwise, the vehicle
or its drivetraincould be damaged.
To ensure that the vehicle is secured against
rolling away unintentionally:
Rthe parking brake must be applied.
Rthe transmission must be in positionPand
the SmartKey must be removed from the
ignition lock.
Ron uphill or downhill gradients, the front
wheels must be turned towards the curb.
Switching off the engine
Important safety notes
GWARNING
The automatic transmission switches to
neutral positionNwhen you switch off the
engine. The vehicle may roll away.There is a
risk of an accident.
After switching off the engine, always switch
to parking positionP.Prevent the parked
vehicle from rolling away by applying the
parking brake.
Vehicles with automatic transmission
XApply the parking brake firmly.
XAll vehicles(except AMG vehicles):shift
the transmission to positionP.
Selector lever in AMG vehicles withPbutton
XAMG vehicles:pressPbutton.
Using the SmartKey
XTurn the SmartKey to position0in the
ignition lock and remove it.
The immobilizer is activated.
iIf you turn off the engine with the
SmartKey and then remove it from the
ignition lock or openafront door, the
automatic transmission shifts toP
automatically.
Using KEYLESS-GO
XPress the Start/Stop button (Ypage 147).
The engine stops and all the indicator
lamps in the instrumentcluster go out.
iWhen the driver's door is closed, this
corresponds to key position1.When the
driver's door is open,this corresponds to
key position0:"key removed".
iIf youturnoff the engine with the Start/
Stop button, the automatic transmission
shifts toN.Ifyou then open one of the front
doors, the automatic transmission shifts to
P.
iThe engine can be turned off while the
vehicle is in motion by pressing and holding
the Start/Stop button for about three
seconds. This function operates
independently of the ECO start/stop
automatic engine switch-off function.
168Parking
Driving and parking

Cruise control lever
To activateorincreasespeed
To activateorreducespeed
$To deactivate cruise control
!To activateatthecurrentspeed/last
stored speed
When you activate cruise control, the stored
speed is shown in the multifunction display
for five seconds. In the multifunction display,
the segments between the stored speed and
the maximum speed light up.
Activation conditions
To activate cruise control, all of the following
activation conditionsmust be fulfilled:
Rthe parkingbrake must be released.
Ryou are drivingfaster than 20 mph
(30 km/h).
RESP®must be active, but not intervening.
Rthe transmission must be in positionD.
Storing and maintaining the current
speed
You can accept the currentspeed if you are
driving faster than 20 mph (30 km/h).
XAcceleratethe vehicle to the desired
speed.
XBriefly press the cruise controllever
upor down.
XRemove your foot from the accelerator
pedal.
Cruise controlisactivated. The vehicle
automatically maintains the stored speed.
iCruise controlmay be unable to maintain
the stored speed on uphill gradients. The
stored speed is resumed when the gradient
evens out. Cruise controlmaintains the
storedspeedondownhill gradients by
automaticallyapplyingthebrakes.
Storing thecurrentspeedorcalling up
the last stored speed
XBrieflypullthe cruise control levertowards
you.
XRemove your foot from the accelerator
pedal.
The first time cruise control is activated, it
stores the current speed or regulates the
speed of the vehicle to the previously
stored speed.
176Driving systems
Driving and parking

vehicles and the right lane on right-hand
drive vehicles.
Vehicles with COMAND
Example:traffic circle
iThe following function is not operational
in all countries.
DISTRONIC PLUS usesadditionalinformation
from yournavigation system so that it can
react appropriately to certain traffic
situations. This is the case if, while following
avehicle, DISTRONIC PLUS is active and you:
Rapproach or drive throughatraffic circle
RapproachaT-intersection
Rturn off atahighwayexit
Even if the vehicleinfront leaves the
detection range, DISTRONIC PLUS
temporarily maintains the current driving
speedand does not accelerate. This is based
on the current map data in the navigation
system.
Afterwards, the vehicleaccelerates back to
the speedyou set.
Stopping
GWARNING
Never get out of the vehiclewhen DISTRONIC
PLUS is activated.
DISTRONIC PLUS must alsonever be
operated, activated or deactivated by a
passenger or from outside the vehicle.
DISTRONIC PLUS does not replace the
parking brake and must not be used for
parking.
The DISTRONIC PLUS braking effect is
canceled and the vehiclecan start moving if:
RDISTRONIC PLUS is deactivated using the
cruise control lever.
Ryou accelerate.
Rthere isamalfunction in the system or an
interruption in the power supply,e.g.
battery failure.
Rthe electricalsystem in the engine
compartment, the battery or the fuses are
tamperedwith.
Rthe battery is disconnected.
If you wishtoleave the vehicleorpark it,
deactivate DISTRONIC PLUS and secure the
vehicleagainst rolling away.
If DISTRONIC PLUS detects that the vehicle
in front is stopping, it brakes yourvehicle until
it is stationary.
Onceyour vehicle is stationary, it remains
stationary and you do not need to depress the
brake.
iDepending on the specified minimum
distance, your vehicle will come to a
standstill atasufficientdistancebehindthe
vehicle in front.The specified minimum
distance is set using the control on the
cruise control lever.
When DISTRONIC PLUS is activated, the
transmission is shifted automatically to
positionPif:
Rthe driver's door is open and the driver's
seat belt is unfastened.
Rthe engine is switched off, unless it is
automatically switched off by the ECO
start/stop function.
Rthe hood is opened.
Rasystem malfunction occurs.
Rthe power supply is not sufficient.
182Driving systems
Driving and parking

Important safety notes
GWARNING
When leaving thevehicle, it can still rollaway
despitebeingbraked by theHOLD function if:
Rthere isamalfunction in the system or in
the voltage supply.
Rthe HOLD function has been deactivated by
pressing the accelerator pedal or the brake
pedal,e.g. byavehicle occupant.
Rthe electrical system in the engine
compartment,the battery or the fuses have
been tampered with.
Rthe battery is disconnected
There isarisk of an accident.
If you wish to exit the vehicle, always turn off
the HOLD function and secure the vehicle
against rolling away.
!If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes
automaticallyincertain situations. To
prevent damage to the vehicle, deactivate
DISTRONIC PLUS and the HOLD function in
the following or other similarsituations:
Rwhen towingthe vehicle
Rin the car wash
Activation conditions
You can activatethe HOLDfunction if:
Rthe vehicle is stationary
Rthe engine is running or if it has been
automatically switched off by the ECO
start/stop function
Rthe driver's door is closed or your seat belt
is fastened
Rthe parking brakeisreleased
Rthe hood is closed
Rthe transmission is in positionD,RorN
RDISTRONIC PLUS is deactivated
Activating theHOLD function
XMake sure that the activation conditions
are met.
XDepress the brakepedal.
XQuickly depressthe brakepedal further
untilappears in the multifunction
display.
The HOLDfunction is activated. You can
release the brakepedal.
iIf depressing the brakepedal the first
timedoes not activatethe HOLDfunction,
wait briefly and thentry again.
Deactivatingthe HOLD function
The HOLD function is deactivated
automatically if:
Ryou accelerate and the transmission is in
positionDorR.
Ryou shift the transmission to positionP.
Ryou depress the brake pedalagain with a
certain amount of pressure until
disappears from the multifunction display.
Ryou activate DISTRONIC PLUS.
When the HOLD function is activated,the
transmission is shifted automatically to
positionPif:
Rthe driver's door is open and the driver's
seat beltisunfastened.
Rthe engine is switched off, unless it is
automaticallyswitched off by the ECO
start/stop function.
Rthe hood is opened.
Rasystem malfunction occurs.
Rthe power supplyisnot sufficient.
Driving systems187
Driving and parking
Z

Display messagesPossible causes/consequences andSolutions


Inoperative See
Operator'sManual
EBD(electronic brakeforcedistribution), ABS, ESP®,BAS,PRE-
SAFE®,theHOLD function and hill start assist are unavailable due
toamalfunction.
BASPLUSand PRE-SAFE®Brake may also havefailed.
In addition,the, andwarninglampslightupin
the instrument cluster andawarning tonesounds.
GWARNING
The brake system continues to function normally, but without the
functionslisted above. The frontand rearwheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XDrive on carefully.
XVisitaqualified specialist workshop immediately.
(USA
only)
(Canada
only)
Release Parking
Brake
You are driving with the parking brake applied.Awarning tone also
sounds.
XRelease theparking brake.
(USA
only)
(Canada
only)
Check Brake Fluid
Level
Thereisnot enough brake fluid in the brake fluid reservoir.
In addition, the(USA only)/
(Canada only) warning
lamp lights up in the instrument cluster andawarning tone
sounds.
GWARNING
The braking effect maybeimpaired.
There isariskofanaccident.
XPull overand stop the vehiclesafelyassoonaspossible,paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
XSecure the vehicle against rolling away(Ypage 167).
XConsultaqualified specialist workshop.
XDo not add brake fluid. This does not correct the malfunction.
240Display messages
On-board computer and displays

Display messagesPossible causes/consequences andSolutions

Check Brake Pad
Wear
The brakepads/liningshavereached their wear limit.
XVisitaqualified specialist workshop.

mbrace Inoperative
Oneormoremain features of thembrace system are
malfunctioning.
XHavethembrace system checkedimmediately ataqualified
specialist workshop.
PRE-SAFE
Inoperative See
Operator'sManual
ImportantfunctionsofPRE-SAFE®have failed.All other occupant
safetysystems, e.g. air bags, remain available.
XVisitaqualified specialist workshop immediately.
PRE-SAFE
Functions
CurrentlyLimited
See Operator's
Manual
PRE-SAFE®Brake is temporarily inoperative.
Possible causes are:
Rfunction is impaired due to heavy rain or snow.
Rthe sensors in the radiator grill and the bumper are dirty.
Rthe radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio
stationsorother sources of electromagnetic radiation.
RAMG vehicles: ESP®is deactivated.
Rthe system is outside the operating temperature range.
Rthe on-board voltage is too low.
When the causes stated above no longer apply, the display
message disappears.
PRE-SAFE®Brake is operational again.
If the display message does not disappear:
XPull over and stop the vehicle safely as soon as possible,paying
attention to road and traffic conditions.
XSecure the vehicle against rollingaway (Ypage 167).
XClean the sensors in the radiator grill and the bumper
(Ypage 315).
XRestartthe engine.
XAMG vehicles: reactivate ESP®(Ypage 70).
PRE-SAFE
Functions Limited
See Operator's
Manual
PRE-SAFE®Brake is inoperative due toamalfunction. BAS PLUS
or the distance warning signal may also have failed.
XVisitaqualified specialist workshop.
Display messages241
On-board computer and displays
Z

Display messagesPossible causes/consequences andSolutions
Front Passenger
Airbag Disabled
See Operator's
Manual
The front-passenger air bag and front-passenger knee bag are
deactivated during thejourney, although:
Ran adult
or
Raperson larger thanacertainsizeisoccupyingthefront-
passenger seat
If additional forces are applied to theseat,thesystem may
interpret theoccupant's weight as lowerthan it actually is.
GWARNING
The front-passenger front air bag and front passenger knee bag
may not be triggered in the event of an accident.
There is an increased risk of injury.
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
XSwitch the ignition off.
XHave the occupant get out of the vehicle.
XKeep the seat unoccupied, close the front-passenger door and
switch on the ignition.
XObserve the PASSENGER AIR BAG OFF indicator lamp in the
center console and the multifunction displayand check the
following:
Seat unoccupied and ignition switched on:
Rthe PASSENGER AIR BAG OFF indicator lamp must light up and
remain lit. If the indicator lamp is on, OCS has disabled the front-
passenger air bag and front-passenger knee bag (Ypage 47).
RtheFront Passenger Airbag Enabled See Operator's
ManualorFront Passenger Airbag Disabled See
Operator's Manualdisplaymessages must not be shown in
the multifunction display.
XWait foraperiod of at least 60 seconds until the necessary
system checkshave been completed.
XMake sure that the displaymessages do not appearinthe
multifunction display.
If these conditionsare fulfilled,the front-passenger seat can be
occupied again. Whether the PASSENGER AIR BAG OFF indicator
lamp remains lit or goes out depends on how OCS classifies the
occupant.
If the conditionsare not fulfilled,the system is not operating
correctly.
Display messages243
On-board computer and displays
Z

Display messagesPossible causes/consequences andSolutions
XVisitaqualified specialist workshop immediately.
Forfurther information about theOccupantClassification System,
see (Ypage 47).
FrontPassenger
Airbag Enabled
See Operator's
Manual
The front-passenger air bag and front-passenger knee bag are
enabled duringthe journey, even though:
Rachild,asmall adult or an object weighingless than the
system's weight threshold is located on the front-passenger
seat
or
Rthe front-passenger seat is unoccupied
The system may detect objectsorforces applying additional
weight on the seat.
GWARNING
The front-passenger front air bag and front passenger knee bag
may be triggeredunintentionally.
There is an increased risk of injury.
XPull over and stop the vehicle safely as soon as possible,paying
attention to road and traffic conditions.
XSecure the vehicle against rollingaway (Ypage 167).
XSwitch the ignition off.
XOpen the front-passenger door.
XRemove the child and the child restraint system fromthe front-
passenger seat.
XMake sure that there are no objectsonthe seat adding to the
weight.
The system may otherwise detect the additional weight and
interpret the seat occupant's weight as greater than it actually
is.
XKeep the seat unoccupied, close the front-passenger door and
switch on the ignition.
XObserve the PASSENGER AIR BAG OFF indicator lamp in the
center console and the multifunction displayand check the
following:
Seat unoccupied and ignition switched on:
Rthe PASSENGER AIR BAG OFF indicator lamp must light up and
remain lit. If the indicator lamp is on, OCS (Occupant
Classification System) has disabled the front-passenger air bag
and front-passenger knee bag (Ypage 47).
RtheFront Passenger Airbag Enabled See Operator's
ManualorFront Passenger Airbag Disabled See
244Display messages
On-board computer and displays

Display messagesPossible causes/consequences andSolutions

CoolantToo Hot
StopVehicleTurn
Engine Off
The coolantistoo hot.
Awarning tone also sounds.
GWARNING
Do notdrive when yourengine is overheated. Thiscan causesome
fluids whichmay have leaked intotheenginecompartmentto
catch fire.
Steamfrom the overheated engine can alsocauseserious burns
which can occur just by opening the hood.
There isarisk of injury.
XPullover and stop the vehiclesafelyand switch off the engine,
paying attention to road and traffic conditions.
XSecure the vehicleagainst rolling away (Ypage167).
XWaituntil the engine hascooleddown.
XMake sure thatthe air supply to the engine radiator is not
blocked, e.g. by snow, slush or ice.
XDo not start the engine again until the displaymessage goes out
and the coolant temperature is below 248‡(120 †).
Otherwise, the engine could be damaged.
XPay attention to the coolant temperature display.
XIf the temperature increases again, visitaqualified specialist
workshop immediately.
Under normal operating conditionsand with the specified coolant
level, the coolant temperature may rise to 248‡(120 †).
Display messages249
On-board computer and displays
Z