trunk MERCEDES-BENZ CLS 2014 Owner's Manual

Load compensation
The vehicle can compensatedifferences in
thevehicle level by raisingorlowering the
rear axle. This is the case, for example, if
people get out or if luggage is being loaded.
Load compensation takes place if:
Radoor or the trunk lid/tailgate is opened
Rthe parked vehicle is unlocked
For larger level changes, the engine must be
running.
4MATIC (permanent four-wheel drive)
If you fail to adapt your driving style, 4MATIC
can neither reduce the risk of accident nor
override the laws of physics. 4MATIC cannot
take account of road, weather and traffic
conditions. 4MATIC is only an aid. You are
responsible for the distance to the vehicle in
front,for vehicle speed, for braking in good
time and for staying in your lane.
Ifadrive wheel spins due to insufficientgrip:
ROnly depress the accelerator pedalasfar
as necessary when pulling away.
RAccelerate less when driving.
!Never tow the vehiclewith one axle
raised. This may damage the transfer case.
Damageofthis sort is not covered by the
Mercedes-Benz Limited Warranty. All
wheels must remaineitheronthe ground
or be fully raised. Observe the instructions
for towing the vehicle with all wheels in full
contact with the ground.
iIn wintry driving conditions, the maximum
effect of 4MATIC can only be achieved if
you use winter tires(M+S tires), with snow
chains if necessary.
4MATIC ensures that allfour wheels are
permanently driven. Together with ESP®,it
improves the traction of yourvehicle
wheneveradrive wheel spins due to
insufficient grip.
PARKTRONIC
Important safetynotes
PARKTRONIC is an electronic parkingaid with
ultrasonic sensors. It indicates visually and
audibly the distancebetween your vehicle
and an object.
PARKTRONIC is only an aid. It is not a
replacementfor your attention to your
immediate surroundings. You are always
responsible for safe maneuvering, parking
and exitingaparkingspace. When
maneuvering, parkingorpulling out of a
parkingspace, make sure that thereare no
persons, animals or objects in the area in
which you are maneuvering.
!When parking, pay particular attention to
objects above or below the sensors, such
as flower pots or trailer drawbars.
PARKTRONIC does not detectsuch objects
when they are in theimmediatevicinity of
thevehicle. You could damagethe vehicle
or the objects.
The sensors may not detect snow and other
objectsthat absorb ultrasonic waves.
Ultrasonic sources such as an automatic
car wash, the compressed-air brakes on a
truck orapneumatic drill could cause
PARKTRONIC to malfunction.
PARKTRONIC may not function correctly on
uneven terrain.
PARKTRONIC is activated automatically when
you:
Rswitch on the ignition
Rshift the transmission to positionD,RorN
Rrelease the parking brake
PARKTRONIC is deactivated at speeds above
11 mph (18 km/h). It is reactivated at lower
speeds.
PARKTRONIC monitors the area around your
vehicle using six sensors in the front bumper
and four sensors in the rear bumper.
Driving systems193
Driving and parking
Z

ThePark Assist Active Select R
ObserveSurroundingsmessage appears in
the multifunction display.
Further transmission shifts may be
necessary.
As soon as the parking procedure is
complete, thePark Assist Finished
message appears in the multifunction
display.PARKTRONICcontinuestobe
available.
XManeuver if necessary.
XAlways observe the warning messages
displayed by PARKTRONIC (Ypage 195).
Parking tips:
RThe way your vehicle is positioned in the
parking space after parking is dependent
on various factors. These include the
position and shape of the vehicles parked
in front and behind it and the conditions of
the location. It may be the case that Active
Parking Assist guides you too far into a
parking space, or not far enough into it. In
some cases, it may also lead you across or
ontothe curb. If necessary, you should
cancel the parking procedure with Active
Parking Assist.
RYou can also engage forward gear
prematurely. The vehicle redirects and
does not drive as far into the parking space.
Shouldagear be changed too early, the
parking procedure will be canceled. A
sensible parking position can no longer be
achieved from this position.
CancelingActive Parking Assist
You can cancel Active Parking Assist at any
time.
XStop the movementofthe multifunction
steeringwheel or steer yourself.
Active Parking Assist will be canceled at
once. ThePark Assist Canceled
message appears in the multifunction
display.
or
XPress the PARKTRONIC button on the
center console (Ypage 195).
PARKTRONIC is switched off and Active
Parking Assist is immediately canceled.
ThePark Assist Canceledmessage
appears in the multifunction display.
Active Parking Assist is canceled
automatically if:
Rthe transmission is shifted too early.
Rparking using Active Parking Assist is no
longer possible.
Ryou are driving faster than6mph
(10 km/h).
Rawheel spins, ESP®intervenes or fails. The
warning lamp lights up in the
instrument cluster.
Awarning tone sounds. The parking symbol
disappears and themultifunction display
shows theParkAssist Canceled
message.
If ActiveParking Assist is canceled, you must
steer again yourself.
Rearview camera
Important safety notes
The rear view camera is only an aid. It is not
areplacementfor your attentiontoyour
immediatesurroundings. You are always
responsible for safe maneuvering and
parking.When maneuvering or parking, make
sure that there are no persons, animals or
objectsinthe area in which you are
maneuvering.
Under the following circumstances, the rear
view camera will not function, or will function
inalimited manner:
Rif the trunk lid/tailgate is open
Rin heavy rain, snow or fog
Rat night or in very dark places
Driving systems199
Driving and parking
Z

Rif the camera is exposed to very bright light
Rif the area is lit by fluorescentlight or LED
lighting (thedisplay may flicker)
Rif there isasudden change in temperature,
e.g. when drivingintoaheatedgarage in
winter
Rif the camera lens is dirtyorobstructed
Rif the rear of your vehicle is damaged. In
this event, have the camera position and
settingchecked ataqualified specialist
workshop.
General notes
Example: Coupe
Rear view camerais located in the handle
strip of the trunk lid.
Rear view camerais an optical parking and
maneuveringaid. It shows the area behind
your vehicle with guide lines in the COMAND
display.
The area behindthe vehicle is displayed as a
mirror image, as in the rear view mirror.
iThe textofmessages shown in the
COMAND display depends on the language
setting. The following are examples of rear
view camera messages in the COMAND
display.
Activating/deactivating the rear view
camera
XTo activate:make sure that the SmartKey
is in position2in the ignition lock.
XMake sure that the "Activation byRgear"
setting is active in COMAND,see the
separate COMAND operatinginstructions.
XEngage reversegear.
The area behind the vehicle is shown in the
COMAND display with guide lines.
To deactivate:the rear view camera is
deactivated if you:
Rshift the transmission to positionP
Rdrive 33 ft (10 m) forwards
Rshift the transmission fromRto another
position after 15 seconds
Rdrive forwards ataspeed of over5mph
(10 km/h)
Displays in the COMAND display
The rear view camera may showadistorted
view of obstacles, show them incorrectly or
not at all. The rear view camera does not show
objects in the following positions:
Rvery close to the rear bumper
Runder the rear bumper
Rin the area immediately above the tailgate
handle
!Objects not at ground level may appear to
be further away than they actually are, e.g.:
Rthe bumper ofaparked vehicle
Rthe drawbar ofatrailer
Rthe ball coupling ofatrailer tow hitch
Rthe rear section of an HGV
Raslanted post
Use the guidelines only for orientation.
Approachobjects no further than the
bottom-most guideline.
200Driving systems
Driving and parking

XPressorto select theDay
Lights:function.
If theDayLights:have been switched on,
the cone of light and thesymbol in
the multifunction display are shown in red.
XPress thebutton to save the setting.
Further information on daytime running
lamps (Ypage 117).
Setting the brightness of the ambient
lighting
XPress the\norbutton on the
steeringwheel to select theSett.menu.
XPress theorbutton to select the
Lightssubmenu.
XPressto confirm.
XPress theorbutton to select the
Amb. Light +/-.function.
You will see the selected setting.
XPressto confirm.
XPress theorbutton to adjust the
brightness to any level fromOfftoLevel
5(bright).
XPress theorbutton to save the
setting.
Setting the ambient lighting color
XPress the\norbutton on the
steeringwheel to select theSett.menu.
XPress theorbutton to select the
Lightssubmenu.
XPressto confirm.
XPress theorbutton to select the
Ambient Light Colorfunction.
XPressto confirm.
XPress theorbutton to set the
color toSOLAR,NEUTRALorPOLAR.
XPress theorbutton to save the
setting.
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
XPress the\norbutton on the
steeringwheel to select theSett.menu.
XPress theorbutton to select the
Lightssubmenu.
XPressto confirm.
XPressorto select the
Surround Lightingfunction.
When theSurround Lightingfunction is
activated, the light cone and the area
around the vehicle are displayedinred in
the multifunction display.
XPress thebutton to save the setting.
Deactivating delayed switch-off of the
exterior lighting temporarily:
XBefore leaving the vehicle, turn the
SmartKey to position0in the ignition lock.
XTurn the SmartKey to position2in the
ignition lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
If you have activated theSurround
Lightingfunction and the light switch is set
to\r,the following functions are activated
when it is dark:
RSurround lighting:the exterior lighting
remains lit for 40 seconds after unlocking
with the SmartKey. If you start the engine,
the surround lighting is switched off and
the automatic headlamp mode is activated
(Ypage 117).
RExterior lighting delayed switch-off:the
exterior lighting remains lit for 60seconds
after the engine is switched off. If you close
all the doors and the trunklid, the exterior
lighting goes off after5seconds.
iDepending on your vehicle's equipment,
when the surround lighting and delayed
Menus and submenus231
On-boar dc omputer and displays
Z

Display messagesPossible causes/consequences andSolutions
ServiceRequired
DoNotShiftGears
Visit Dealer
You cannotchange the transmission position due toamalfunction.
Awarning tone also sounds.
If transmission positionDis selected:
XDrive toaqualified specialist workshopwithout shiftingthe
transmission from positionD.
If transmission positionR,NorPis selected:
XNotifyaqualified specialist workshoporbreakdown service.
OnlyShift to 'P'
whenVehicleis
Stationary
The vehicle is moving.
XPull overand stop the vehiclesafelyassoonaspossible,paying
attention to road and traffic conditions.
XShift the transmission to positionP.
the trunk lid is open.
XClose the trunk lid.
The hood is open.Awarning tone also sounds.
GWARNING
The open hood may blockyour view when the vehicle is in motion.
There isarisk of an accident.
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
XClose the hood.
At least one door is open.Awarning tone also sounds.
XClose all thedoors.


RearLeftBackrest
Not Latchedor
RearRight
Backrest Not
Latched
The backrestinthe rear is not engaged on the left-hand and/or
right-hand side.Awarning tone also sounds.
XPush thebackrestback until it engages.


LockSeatBackrest
Front LeftorLock
SeatBackrest
Front Right
The driver'sorfront passenger'sseat backrestisnot engaged. A
warning tonealso sounds.
XPush the backrest back until it engages.
Display messages261
On-board computer and displays
Z

Useful information
iThis Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please notethat your vehicle may
not be equipped with all features
described. This also applies to safety-
related systemsand functions.
iRead the information on qualified
specialist workshops: (Ypage 26).
Stowage areas
Loading guidelines
GWARNING
If objects, luggage or loads are not secured or
not secured sufficiently, they could slip, tip
over or be flung around and thereby hit vehicle
occupants.There isarisk of injury,
particularly in the eventofsudden braking or
asuddenchange in direction.
Always store objectssothat they cannot be
flung around. Secure objects, luggageor
loads against slipping or tipping before the
journey.
GWARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the
trunk lid is open when the engine is running,
especially if the vehicle is in motion. There is
arisk of poisoning.
Always switch off the engine before opening
the trunk lid. Never drive with the trunk lid
open.
The handling characteristics ofaladen
vehicle are dependent on the distribution of
the load within the vehicle. For this reason,
you should observe the following notes when
transportingaload:
RNever exceed the maximum permissible
gross vehicle weight or the gross axle
weight rating of the vehicle (including
occupants). The values are specified on the
vehicle identification plate on the B-pillar of
the driver's door.
RThe trunk is the preferred place to carry
objects.
RPosition heavy loads as far forwards as
possible and as low down in the trunk as
possible.
RThe load must not protrude above the
upper edge of the seat backrests.
RAlways place the load against the rear or
front seat backrests. Make sure that the
seat backrests are securely locked into
place.
RAlways place the load behind unoccupied
seats if possible.
RUse the cargo tie down rings and the parcel
nets to transport loads and luggage.
RUse cargo tie-down rings and fastening
materials appropriate for the weight and
size of the load.
RSecure the load with sufficiently strongand
wear-resistant tie-downs. pad sharp edges
for protection.
Stowage space
Important safety notes
GWARNING
If you do not correctly store objectsinthe
vehicle interior, they can slip or be flung
around, thus strikingvehicle occupants.
There isarisk of injury, especially when
braking or abruptly changing directions.
278Stowage areas
Stowage and features

RAlwaysstoreobjects so thatthey cannot be
flung around in these or in similar
situations.
RAlways make sure that objectsdonot
protrude from stowage compartments,
parcel nets or stowage nets.
RClose lockable stowage compartments
while driving.
RStow and secure objectsthat are heavy,
hard, pointy, sharp-edged, fragile or too
large in the trunk.
Observe the loading guidelines (Ypage 278).
Glove box
XTo open:pull handleand open glove box
flap.
XTo close:fold glove box flapupwards
until it engages.
iThe glove box can be ventilated
(Ypage 142).
The glove box can only be locked and
unlocked using the mechanical key.
XTo lock:insert the mechanical key into the
lock and turn it 90° clockwise to position
.
XTo unlock:insert the mechanical key into
the lock and turn it 90° counter-clockwise
to position
.
Eyeglassescompartment
There isacompartmenttostow eyeglasses
in the headliner on the driver's side.
XTo open:pull down eyeglasses
compartmentby the handle.
Stowage compartments in the front
center console
All models except AMG vehicles
XTo open:slide the cover forwards by
handlein the direction of the arrow until
it engages.
XTo close:briefly press the front of
handle.
Stowage areas279
Stowage and features
Z

AMG vehiclesXBriefly press trim.
iThe stowagetray can be removed.
Stowage compartmentunderthe
armrest
XTo open:pull handleup.
The armrestfolds out.
iDependingonthe vehicle's equipment, a
12Vsocket,aUSB socket,and an AUX IN
connection or Media Interface are installed
in the stowage compartment.AMedia
Interface isauniversal interface for mobile
audio equipment, e.g. for an iPod®or MP3
player (see the separate COMAND
OperatingInstructions).
Stowage compartment under the front
seats
GWARNING
If you exceed the maximum load for the
stowage compartment,the cover may not be
able to restrain the items. Itemsmay be
thrown out of the stowage compartment and
hit vehicle occupants. There isarisk of injury,
particularly in the event of sudden brakingor
asudden change in direction.
Never exceedthe maximum permissible load
for the stowage compartment.Stowand
secure heavy objects in the trunk.
The maximum permissible load of the
stowage compartment is 3.3 lbs (1.5 kg).
XTo open:pull handleup and fold
coverforwards.
iOn vehicles withafire extinguisher, the
fire extinguisher is located in the stowage
compartment under the driver's seat.
Stowage compartmentsinthe rear
center console
XTo open:slide coversandin the
direction of the arrow.
iThere isa12Vpower socket in the front
stowage compartment.
280Stowage areas
Stowage and features

Stowage compartment in the rear seat
armrest
!Do not sit or lean your bodyweight on the
armrests when they are folded out as you
could damage them.
!Close the cover of the stowage
compartmentbefore folding the rear seat
armrest back intothe seat backrest.
XTo open:fold down seat armrest.
XFold coverof the armrest upwards.
Storage pockets
GWARNING
Storage bags are intended for storing light-
weight items only.
Heavy objects, objects with sharp edges or
fragile objects may not be transported in the
storage bag. In an accident, during hard
braking, or sudden maneuvers,they could be
thrown around inside the vehicle and cause
injurytovehicle occupants.
Storage bags cannot protecttransported
goods in the event of an accident.
The stowage pockets are on the back of the
driver's and front-passenger'sseats.
Stowage nets
Stowage netsare located in the front-
passenger footwell and on the right-hand side
of the trunk.
Observe the loading guidelines (Ypage 278)
and the safety notes regarding stowage
spaces (Ypage 278).
Rear bench seat through-loading
feature
Important safetynotes
GWARNING
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold
forwards, e.g. when brakingsuddenly or in the
event of an accident.
RThe vehicle occupantwould thereby be
pushed into the seat belt by the rear bench
seat/rear seat or by the seat backrest.The
seat belt can no longer offer the intended
level of protection and could even cause
injuries.
RObjectsorloads in the trunk cannot be
restrained by the seat backrest.
There is an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear seat
are engaged.
Observe the loading guidelines (Ypage 278).
The left-hand and right-hand rear seat
backrests can be folded down separately to
increase the trunk capacity.
Folding the seat backrest forward
iVehicles with memory function: when you
fold one or both parts of the rear seat
Stowage areas281
Stowage and features
Z

backrest forwards, the respective front
seat moves forward slightly, when
necessary, in order to avoid contact.
XVehicles without memoryfunction:if
necessary,movethe driver's or front-
passengerseat forwards.
XOpen the trunk.
XPull right-hand or left-hand rear seat
backrest release handle.
The correspondingrear seat backrest is
released.
XFold rear seat backrestforwards.
XMove the driver's or front-passenger seat
back if necessary.
Folding the seat backrest back
!Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be
damaged.
XMove the driver's or front-passenger seat
forward if necessary.
XFold rear seat backrestback until it
engages.
If the rear seat backrest is not engaged and
locked, this will be shown in the
multifunction display in the instrument
cluster.Awarning tone also sounds.
XMovethedriver'sorfront-passenger seat
back if necessary.
iYou should always engage therear seat
backrests if you do notneed the through-
loading feature. This will prevent
unauthorized access to the trunkfrom the
vehicle interior.
Securing cargo
Cargo tie-down rings
General notes
Observe the following notes on securing
loads:
RObserve the loading guidelines
(Ypage 278).
RSecure the load using the cargo tie-down
rings.
RDistribute the load on the cargo tie-down
rings evenly.
RDo not use elastic straps or netstosecure
aload, as these are only intended as an
anti-slip protection for light loads.
RDo not route tie-downs across sharp edges
or corners.
RPad sharp edges for protection.
282Stowage areas
Stowage and features