air condition MERCEDES-BENZ CLS 2014 Owner's Guide

Display messagesPossible causes/consequences andSolutions
LaneKeeping
Assist Currently
Unavailable See
Operator'sManual
orActive Lane
KeepingAssist
Currently
Unavailable See
Operator'sManual
LaneKeepingAssistorActive Lane Keeping Assist is deactivated
and temporarilyinoperative.Possible causes are:
Rthe windshield in the camera's field of vision is dirty.
Rvisibility is impaired due to heavy rain, snow or fog.
Rthere are no lane markings foralonger period.
Rthe lane markings are worn, dark or covered, e.g. by dirt or snow.
When the causes stated above no longer apply,the display
message disappears.
Lane Keeping Assist or Active Lane Keeping Assist is operational
again.
If the display message does not disappear:
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
XClean the windshield.
Lane Keeping
Assist
Inoperativeor
Active Lane
Keeping Assist
Inoperative
Lane Keeping Assist or Active Lane Keeping Assist is defective.
XVisitaqualified specialist workshop.
Display messages253
On-board computer and displays
Z

Display messagesPossible causes/consequences andSolutions
Blind SpotAssist
Currently
Unavailable See
Operator'sManual
orActive Blind
SpotAssist
Currently
Unavailable See
Operator'sManual
Blind Spot AssistorActiveBlind Spot Assististemporarily
inoperative. Possiblecauses are:
Rthesensorsare dirty.
Rfunction is impaireddue to heavyrain or snow.
Rtheradarsensor system is outside the operatingtemperature
range.
Rthe radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio
stations or other sources of electromagnetic radiation.
The yellowindicator lamps also light up in the exterior
mirrors.
When the causes stated above no longer apply, the display
message disappears.
Blind Spot Assist or Active Blind Spot Assist is operational again.
If the display message does not disappear:
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
XClean the sensors(Ypage 315).
XRestart the engine.
Blind Spot Assist
Inoperativeor
Active Blind Spot
Assist Inoperative
Blind Spot Assist or Active Blind Spot Assist is defective.
The yellowindicator lamps also light up in the exterior
mirrors.
XVisitaqualified specialist workshop.
Park Assist
Canceled
The driver's door is open and the driver's seat belt has not been
fastened.
XRepeat the parkingprocess with the seat belt fastened and the
driver's door closed.
You have inadvertently touched the multifunction steering wheel
while steering intervention was active.
XWhile steering intervention is active, make sure that the
multifunction steering wheel is not touched unintentionally.
The vehicle has started to skid and ESP®has intervened.
XUse Active ParkingAssist again later (Ypage 196).
254Display messages
On-boar dc omputer and displays

Display messagesPossible causes/consequences andSolutions
DISTRONIC PLUS
Currently
Unavailable See
Operator'sManual
DISTRONIC PLUSistemporarily inoperative.
Possible causes are:
Rfunction is impaired due to heavy rain or snow.
Rthe sensors in the radiator grill and the bumper are dirty.
Rthe radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio
stations or other sources of electromagnetic radiation.
Rthe system is outside the operating temperature range.
Rthe on-board voltage is too low.
Awarning tone also sounds.
When thecauses statedabovenolonger apply, thedisplay
message disappears.
DISTRONICisoperational again.
If thedisplay message does notdisappear:
XPull over and stop the vehicle safely as soon as possible,paying
attention to road and traffic conditions.
XSecure the vehicle against rollingaway (Ypage 167).
XClean the sensors in the radiator grill and the bumper
(Ypage 315).
XRestartthe engine.
DISTRONIC PLUS
Inoperative
DISTRONIC PLUS is defective.
The following may have also failed:
RBAS PLUS (Brake Assist System PLUS)
RPRE-SAFE®Brake
Awarning tone also sounds.
XVisitaqualified specialist workshop.
DISTRONIC PLUS
Suspended
You have depressed the accelerator pedal. DISTRONIC PLUS is no
longer controlling the speed of the vehicle.
XRemove your foot from the accelerator pedal.
DISTRONIC PLUS
---mph
An activation condition for DISTRONIC PLUS is not fulfilled.
XCheck the activation conditionsfor DISTRONIC PLUS
(Ypage 177).
256Display messages
On-boar dc omputer and displays

Tires
Display messagesPossible causes/consequencesandSolutions
Check
TirePressure Soon
The tire pressure loss warningsystem has detectedasignificant
lossinpressure.
Awarning tone also sounds.
GWARNING
Withtirepressureswhichare toolow, there isariskofthe
following hazards:
Rthey may burst, especiallyasthe load and vehicle speed
increase.
Rthey may wear excessively and/or unevenly, which may greatly
impair tire traction.
Rthe driving characteristics, as well as steering and braking, may
be greatly impaired.
There isarisk of an accident.
XStop the vehicle without making any sudden steering or braking
maneuvers. Pay attention to the traffic conditionsasyou do so.
XSecure the vehicle against rolling away (Ypage 167).
XCheck the tires and, if necessary, follow the instructions for a
flat tire (Ypage 321).
XCheck the tire pressures and, if necessary, correct the tire
pressure.
XRestart the tire pressure loss warning system when the tire
pressure is correct (Ypage 342).
CheckTirePressure
Then Restart Run
Flat Indicator
The tire pressure loss warning system generatedadisplay
message and has not been restarted since.
XSet the correct tire pressure in all four tires.
XRestart the tire pressure loss warning system (Ypage 342).
Run Flat Indicator
Inoperative
The tire pressure loss warning system is faulty.
XVisitaqualified specialist workshop.
Rectify
Tire Pressure
The tire pressure is too low in at least one of the tires, or the tire
pressure difference between the wheels is too great.
XCheck the tire pressures at the next opportunity (Ypage 342).
XIf necessary, correct the tire pressure.
XRestart the tire pressure monitor (Ypage 345).
258Display messages
On-board computer and displays

Display messagesPossible causes/consequences andSolutions
Check
Tires
The tire pressureinoneor moretires has dropped significantly.
The wheelposition is displayed in themultifunction display.
Awarning tone also sounds.
GWARNING
Withtirepressureswhichare toolow, there isariskofthe
following hazards:
Rthey may burst, especiallyasthe load and vehicle speed
increase.
Rthey may wear excessively and/or unevenly, which may greatly
impair tire traction.
Rthe driving characteristics, as well as steering and braking, may
be greatly impaired.
There isarisk of an accident.
XStop the vehicle without making any sudden steering or braking
maneuvers. Pay attention to the traffic conditionsasyou do so.
XSecure the vehicle against rolling away (Ypage 167).
XCheck the tires and, if necessary, follow the instructions for a
flat tire (Ypage 321).
XCheck the tire pressure (Ypage 342).
XIf necessary, correct the tire pressure.
Warning
Tire Malfunction
The tire pressure in one or more tires has dropped suddenly. The
wheel position is shown in the multifunction display.
GWARNING
If you drive withaflat tire, there isarisk of the following hazards:
Raflat tire affects the ability to steer or brake the vehicle.
Ryou could lose control of the vehicle.
Rcontinued driving withaflat tire will cause excessive heat build-
up and possiblyafire.
There isarisk of an accident.
XStop the vehicle without making any sudden steering or braking
maneuvers. Pay attention to the traffic conditionsasyou do so.
XSecure the vehicle against rolling away (Ypage 167).
XCheck the tires and, if necessary, follow the instructions for a
flat tire (Ypage 321).
Display messages259
On-board computer and displays
Z

Safety systems
ProblemPossible causes/consequences andSolutions
(USA only)

(Canada only)
The red brake system
warning lamp comes on
while the engine is
running.Awarning tone
also sounds.
GWARNING
The brake boosting effect is malfunctioning and the braking
characteristics may be affected.
There isarisk of an accident.
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
XSecure the vehicle against rolling away (Ypage 167).
XConsultaqualified specialist workshop.
XObserve the additional display messages in the multifunction
display.
(USA only)

(Canada only)
The red brake system
warning lamp comes on
while the engine is
running.Awarning tone
also sounds.
There is not enough brake fluid in the brake fluid reservoir.
GWARNING
The braking effect may be impaired.
There isarisk of an accident.
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
XSecure the vehicle against rolling away (Ypage 167).
XDo not add brake fluid. Adding more will not remedy the
malfunction.
XConsultaqualified specialist workshop.
XObserve the additional display messages in the multifunction
display.
266Indicator and warning lampsinthe instrument cluster
On-board computer and displays

ProblemPossible causes/consequences andSolutions

The red coolant
warning lamp comes on
while the engine is
running.
The coolant level is too low.
If the coolant level is correct, the airflow to the engine radiator
may be blocked or the electric engine radiator fan may be
malfunctioning.
The coolant is too hot and the engine is no longer being cooled
sufficiently.
XObserve the additional display messages in the multifunction
display.
XPull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
XLeave the vehicle and keepasafe distance from the vehicle until
the engine has cooled down.
XCheck the coolant level and add coolant, observing the warning
notes (Ypage 308).
XIf you need to add coolant more often than usual, have the
engine coolant system checked.
XMake sure that the air supply to the engine radiator is not
blocked, e.g. by snow, slush or ice.
XDo not start the engine again until the coolant temperature is
under 248‡(120 †). Otherwise,the engine couldbedamaged.
XDrive to the nearest qualified specialist workshop.
XAvoid subjecting the engine to heavy loads, e.g. driving in
mountainousterrain, and stop-and-go traffic.

The red coolant
warning lamp comes on
while the engine is
running.Awarning tone
also sounds.
The coolant temperature has exceeded 248‡(120 †). The
airflow to the engine radiator may be blocked or the coolant level
may be too low.
GWARNING
The engine is not being cooledsufficiently and may be damaged.
Do not drive whenyour engine is overheated. This can cause some
fluids which may have leaked into the engine compartment to
catchfire.
Steam from the overheated engine can also cause serious burns
which can occur just by opening the hood.
There isarisk of injury.
XObserve the additional display messages in the multifunction
display.
XPull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
274Indicator and warning lampsinthe instrument cluster
On-board computer and displays

Tires
ProblemPossible causes/consequencesandSolutions

The yellow tire pressure
monitor warninglamp
(pressure loss/
malfunction) is lit.
The tire pressure monitor hasdetectedalossofpressure in at
leastone of the tires.
GWARNING
With tire pressures which aretoo low, there isarisk of the
following hazards:
Rthey may burst, especially as the load and vehicle speed
increase.
Rthey may wear excessively and/or unevenly, which may greatly
impair tire traction.
Rthe driving characteristics, as well as steeringand braking, may
be greatly impaired.
There isarisk of an accident.
XStop the vehicle without making any sudden steeringorbraking
maneuvers. Pay attention to the traffic conditions as you do so.
XSecure the vehicle against rolling away (Ypage 167).
XObserve the additional display messages in the multifunction
display.
XCheck the tires and, if necessary, follow the instructions for a
flat tire (Ypage 321).
XCheck the tire pressure (Ypage 342).
XIf necessary, correctthe tire pressure.

The yellow tire pressure
monitor warning lamp
(pressure loss/
malfunction) flashes for
approximately one
minute and then
remains lit.
The tire pressure monitor is faulty.
GWARNING
The system is possibly unable to recognize or register low tire
pressure.
There isarisk of an accident.
XObserve the additional display messages in the multifunction
display.
XVisitaqualified specialist workshop.
276Indicator and warning lampsinthe instrument cluster
On-board computer and displays

General notes
An emergency call is dialed automatically if
an air bag or Emergency Tensioning Device is
triggered.
iYou cannot end an automatically
triggered emergency call yourself.
An emergency call can alsobeinitiated
manually.
As soon as the emergency call has been
initiated, the indicator lamp in the SOS button
flashes. The multifunction display shows the
Connecting Callmessage.
The audio outputismuted.
Once the connection has been made, the
Call Connectedmessage appears in the
multifunction display.
All important information on the emergency
is transmitted, for example:
RCurrent location of the vehicle (as
determined by the GPS system)
RVehicle identification number
RInformation on the severity of the accident
Shortly after the emergency call has been
initiated,avoice connection is automatically
established between the Mercedes-Benz
Customer Assistance Center and the vehicle
occupants.
RIf the vehicle occupants respond, the
Mercedes-Benz Customer Assistance
Center attempts to get more information
on the emergency.
RIf there is no response from the vehicle
occupants, an ambulance is immediately
sent to the vehicle.
If no voice connection can be established to
the response center, the system was unable
to initiate an emergency call. This can occur
for instance if the relevant mobile phone
network is not available. The indicator lamp
in the SOS button flashes continuously.
TheCall Failedmessage appears in the
multifunction displayand must be confirmed.
In this case, summon assistance by other
means.
Making an emergency call
GWARNING
It can be dangerous to remain in the vehicle,
even if you have pressed the SOS button in an
emergency if:
Ryou see smoke inside or outside of the
vehicle, e.g. if there isafire after an
accident
Rthe vehicle is onadangerous section of
road
Rthe vehicle is not visible or cannot easilybe
seen by other road users, particularly when
dark or in poor visibility conditions
There isarisk of an accident and injury.
Leave the vehicle immediately in this or
similar situations as soon as it is safe to do
so. Move toasafe location along with other
vehicle occupants. In such situations, secure
the vehicle in accordance with national
regulations, e. g. withawarning triangle.
XTo initiate an emergency call
manually:press coverbriefly to open.
XPress SOS buttonbriefly.
The indicator lamp in SOS button
flashes until the emergency call is
concluded.
XWait foravoice connection to the
Mercedes-Benz Customer Assistance
Center.
XAfter the emergency call, close cover.
iIf the mobile phone network is
unavailable, mbrace will not be able to
make the emergency call. If you leave the
292Features
Stowage and features

Under these or similarconditions, have, for
example, the air filter, engine oil and oil filter
replaced or changed more frequently. Under
arduous operating conditions, the tires must
be checked more often.Further information
can be obtained ataqualified specialist
workshop, e.g. an authorized Mercedes-Benz
Center.
Driving abroad
An extensive Mercedes-Benz Servicenetwork
is also available in other countries. You can
obtain further information from any
authorized Mercedes-Benz Center.
Care
General notes
HEnvironmental note
Dispose of empty packagingand cleaning
clothsinanenvironmentally responsible
manner.
!For cleaningyour vehicle, do not use any
of the following:
Rdry, rough or hard cloths
Rabrasive cleaningagents
Rsolvents
Rcleaningagents containingsolvents
Do not scrub.
Do not touch the surfaces or protective
films with hard objects, e.g.aring or ice
scraper. You could otherwise scratch or
damage the surfaces and protective film.
!Do not park the vehicle for an extended
period straight after cleaningit, particularly
after having cleaned the wheels with wheel
cleaner. Wheel cleaners could cause
increased corrosion of the brake discs and
brake pads/linings. For this reason, you
should drive forafew minutes after
cleaning. Braking heats the brake discs and
the brake pads/linings, thus drying them.
The vehicle can then be parked.
Regular care of your vehicle isacondition for
retaining the quality in the long term.
Use care productsand cleaningagents
recommended and approved by Mercedes-
Benz.
Washing the vehicle and cleaning the
paintwork
Automatic car wash
GWARNING
Braking efficiency is reduced after washing
the vehicle. There isarisk of an accident.
After the vehicle has been washed, brake
carefully while paying attention to the traffic
conditions until full brakingpower is restored.
!If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes
automatically in certain situations. To
preventdamage to thevehicle,deactivate
DISTRONICPLUS and the HOLD function in
the following or other similar situations:
Rwhen towing the vehicle
Rin the car wash
!Never clean yourvehicle inaTouchless
Automatic Car Wash as these use special
cleaningagents.These cleaning agents can
damage the paintwork or plastic parts.
!Make sure that:
Rthe side windows and the sliding sunroof
are fully closed.
Rthe ventilation/heating is switched off
(the OFF button has been pressed).
Rthe windshield wiper switch is in position
0.
Otherwise, the vehicle might be damaged.
!In car washes withatowing mechanism,
make sure that the automatic transmission
is in transmission positionN,otherwise the
vehicle could be damaged.
RVehicles withaSmartKey:
Care311
Maintenance and care
Z