warning light MERCEDES-BENZ CLS 2014 Manual PDF
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2014, Model line: CLS, Model: MERCEDES-BENZ CLS 2014Pages: 382, PDF Size: 4.7 MB
Page 215 of 382
The brightness of the indicator/warning
lamps is adjusted automatically accordingto
the ambient light.
Visual and acoustic collision warning
If you switch on the turn signals to change
lanes andavehicle is detected in the side
monitoring range, you receiveavisual and
acoustic collision warning. You then hear a
double warning toneand red warning
lamp flashes. If the turn signal remains on,
detected vehicles are indicated by the
flashing of red warning lamp .There are no
further warning tones.
Course-correcting brake application
GWARNING
Acourse-correctingbrake application cannot
alwayspreventacollision. There isarisk of
an accident.
Always steer, brake or accelerate yourself,
especially if Active Blind Spot Assist warns
you or makesacourse-correcting brake
application. Always maintainasafe distance
at the sides.
If Active Blind Spot Assist detectsarisk of a
lateral collision in the monitoring range, a
course-correcting brake application is carried
out. This is meant to assist you in avoiding a
collision.
Ifacourse-correcting brake application
occurs, red warning lamp flashes in the
exterior mirror andadual warning tone
sounds. In addition, the display shown in the
lower image appears in the multifunction
display.
In very rare cases, the system may make an
inappropriate brake application. An
inappropriate course-correcting brake
application may be interrupted at any time if
you steer slightly in the opposite direction or
accelerate, for example.
The course-correcting brake application is
available in the speed range between
20 mph (30 km/h) and 120 mph (200 km/h).
Either no braking application, oracourse-
correcting brake application adapted to the
driving situation occurs if:
Rthere are vehicles or obstacles, e.g. crash
barriers, located on both sides of your
vehicle.
Ravehicle approaches you too closely at the
side.
Ryou have adoptedasporty driving style with
high cornering speeds.
Ryou clearly brake or accelerate.
Radriving safety system intervenes, e.g.
ESP®or PRE-SAFE®Brake.
RESP®is switched off.
Raloss of tire pressure oradefectivetire is
detected.
Switching on Active Blind Spot Assist
XMake sure that the radar sensor system
(Ypage 232) and Active Blind Spot Assist
(Ypage 228) are activated in the on-board
computer.
XTurn the SmartKey to position2in the
ignition lock.
Warning lamps in the exterior mirrors
light up red for approximately
1.5 seconds and then turn yellow.
Driving systems213
Driving and parking
Z
Page 217 of 382
Rthe roadisnarrow and winding
Rthere arestrong shadows castonthe lane
If no vehicle is detected in the adjacent lane
and there are broken lane markings detected,
no lane-correcting brake application is made.
Warning vibration in the steering wheel
Awarning may be given ifafront wheel
passes overalane marking. It will warn you
by means of intermittent vibration in the
steering wheel for up to 1.5 seconds.
Lane-correcting brake application
GWARNING
Alane-correcting brake application cannot
always bring the vehicle back into the original
lane. There isarisk of an accident.
Always steer, brake or accelerate yourself,
especially if Active Lane Keeping Assist warns
you or makesalane-correcting brake
application.
GWARNING
Active Lane Keeping Assist does not detect
traffic conditionsorroad users. In very rare
cases, the system may make an inappropriate
brake application, e.g. after intentionally
driving overasolid lane marking. There is a
risk of an accident.
An inappropriate brake application may be
interrupted at any time if you steer slightly in
the opposite direction. Always make sure that
there is sufficient distance on the side for
other traffic or obstacles.
If you leave your lane, under certain
circumstances the vehicle will brake briefly
on one side. This is meant to assist you in
bringing the vehicle back to the original lane.
Ifalane-correcting brake application occurs,
display appears in the multifunction
display.
This function is available in the range between
40 mph and 120 mph (60 km/h and
200 km/h).
Alane-correcting brake application can only
be made after driving overasolid,
recognizable lane marking. Before this, a
warning must be given by means of
intermittent vibration in the steering wheel.
In addition,alane with lane markings on both
sides must be recognized. The brake
application also slightly reduces vehicle
speed.
iAfurther lane-correcting brake
application can only occur after your
vehicle has returned to the original lane.
No lane-correcting brake application occurs
if:
Ryou clearly and actively steer, brake or
accelerate.
Ryou cut the corner onasharp bend.
Ryou have switched on the turn signals.
Radriving safety system intervenes, e.g.
ESP®,PRE-SAFE®Brake or Active Blind
Spot Assist.
Ryou have adoptedasporty driving style with
high cornering speeds or high rates of
acceleration.
RESP®is switched off.
Rthe transmission is not in positionD.
Raloss of tire pressure oradefective tire has
been detected and displayed.
Active Lane Keeping Assist may is unable to
detect other road or traffic conditions. An
inappropriate brake application may be
interrupted at any time if you:
Driving systems215
Driving and parking
Z
Page 218 of 382
Rsteer slightly in the opposite direction
Ruseaturn signal
Rclearly brake or accelerate
Alane-correcting brakeapplicationis
interrupted automatically if:
Radrivingsafetysystem intervenes,e.g.
ESP®,PRE-SAFE®Brake or ActiveBlind
Spot Assist.
Rlane markings can no longer be recognized.
Switching on Active Lane Keeping Assist
XSwitch on ActiveLane KeepingAssist using
the on-board computer;todoso, select
StandardorAdaptive(Ypage 229).
If you drive at speeds above 40 mph
(60 km/h) and lane markings are detected,
the lines in the assistancegraphicsdisplay
(Ypage 227)are shown in green.Lane
KeepingAssist is ready for use.
IfStandardis selected, no warning
vibration occurs if:
Ryou have switched on the turnsignals.In
thisevent, the warnings aresuppressed
foracertainperiodoftime.
Radriving safety systemintervenes, such
as ABS, BAS or ESP®.
IfAdaptiveis selected, no warning
vibrationoccurs if:
Ryouhaveswitched on the turnsignals.In
thisevent, the warnings aresuppressed
foracertainperiodoftime.
Radriving safety systemintervenes, e.g.
ABS, BAS or ESP®.
Ryouaccelerate hard, e.g.kickdown.
Ryou brakehard.
Ryou steer actively, e.g. swervetoavoid
an obstacle or change lanes quickly.
Ryou cut the corner onasharp bend.
In order that you are warnedonly when
necessary and in good timeifyou cross the
lane marking, the system recognizes certain
conditions and warns you accordingly.
The warning vibration occurs earlier if:
Ryou approach the outer lane marking on a
bend.
Rthe road has very wide lanes, e.g. a
highway.
Rthe system recognizes solid lane markings.
The warning vibration occurs later if:
Rthe road has narrow lanes.
Ryou cut the corner onabend.
216Driving systems
Driving and parking
Page 230 of 382
GWARNING
If you deactivate ESP®,ESP®no longer
stabilizes the vehicle. There is an increased
risk of skidding and an accident.
Only deactivate ESP®in the situations
described in the following.
It may be best to deactivate ESP®in the
following situations:
Rwhen using snow chains
Rin deep snow
Ron sand or gravel
Activating/deactivating ESP®on AMG
vehicles (Ypage70).
For further information about ESP®,see
(Ypage68).
XStart the engine.
XPress the \nor button on the
steering wheeltoselect theDriveAssist
menu.
XPress the or button to select
ESP.
XPress the button.
The current selection is displayed.
XTo activate/deactivate:press the
button again.
ESP®is deactivated if the warning lamp
in the instrument cluster lights up
continuously when the engine is running.
If the warning lamp and the
warning lamp are lit continuously,ESP®is not
available due toamalfunction.
Observe the information on warning lamps
(Ypage269).
Observe the information on display messages
(Ypage238).
Activating/deactivating PRE-SAFE®
Brake
PRE-SAFE®Brake is only available in vehicles
with DISTRONIC PLUS.
XPress \nor on the steering wheel
to select theDriveAssistmenu.
XPress the or button to select
PRE-SAFEBrake.
XPress the button.
The current selection is displayed.
XTo activate/deactivate:press the
button again.
When PRE-SAFE®Brake is deactivated, the
assistance graphic showsthe symbol in
the multifunction display.
For more information on PRE-SAFE®Brake,
see (Ypage72).
Activating/deactivating ATTENTION
ASSIST
XPress \nor on the steering wheel
to select theDriveAssistmenu.
XPress or to selectAttention
Assist.
XPress the button.
The current selection is displayed.
XTo activate/deactivate:press the
button again.
When ATTENTION ASSIST is deactivated, the
symbol and OFF appear in the
multifunction display in the assistance
display when the engine is running.
For further information about ATTENTION
ASSIST, see (Ypage203).
Activating/deactivating Blind Spot
Assist
XPress \nor on the steering wheel
to select theDriveAssistmenu.
XPress the or button to select
Blind Spot Asst.
228Menus and submenus
On-board computer and displays
Page 231 of 382
XPress the button.
The currentselection is displayed.
XTo activate/deactivate:press the
button again.
If theBlind Spot Assist Sensors
DeactivatedorAct. Blind Spot Asst.
Sensors Deactivatedmessage appears,
the radar sensor system is deactivated.
XSwitchonthe radar sensor system
(Ypage 232).
For further information about Blind Spot
Assist,see (Ypage 207).
For further information about Active Blind
Spot Assist,see (Ypage 211).
Activating/deactivating Lane Keeping
Assist
XPress \nor on the steering wheel
to select theDriveAssistmenu.
XPress the or button to select
Lane Keep. Asst.
XPress the button.
The currentselection is displayed.
XPress to confirm.
XPress the or button to setOff,
StandardorAdaptive.
XPress the button to save the setting.
For further information about Lane Keeping
Assist,see (Ypage 209).
For further information about Active Lane
Keeping Assist,see (Ypage 214).
Maintenance menu
In theServ.menu, you have the following
options:
RCalling up display messages in message
memory (Ypage 237)
RRestarting the tire pressure loss warning
system (Ypage 342)
RCheckingthe tire pressure electronically
(Ypage 342)
RCalling up the servicedue date
(Ypage 310)
Settings menu
Introduction
In theSett.menu, you have the following
options:
RChanging the instrument cluster settings
(Ypage 229)
RChanging the light settings (Ypage 230)
RChanging the vehicle settings
(Ypage 232)
RChanging the convenience settings
(Ypage 233)
RRestoringthe factory settings
(Ypage 234)
Instrument cluster
Selecting the unit of measurement for
distance
TheDisplay Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in kilometers or miles
in the multifunction display.
Menus and submenus229
On-boar dc omputer and displays
Z
Page 240 of 382
Safety systems
Display messagesPossible causes/consequences and Solutions
Currently
Unavailable See
Operator's Manual
ABS (Anti-lock Braking System), ESP®(Electronic Stability
Program), BAS (Brake Assist), PRE-SAFE®,the HOLD function and
hill start assist are temporarily unavailable.
BAS PLUS and PRE-SAFE®Brake may also have failed.
In addition, the , and warning lamps light up in
the instrumentcluster.
ATTENTIONASSIST is deactivated.
Possible causes are:
Rself-diagnosis is not yet complete.
Rthe on-board voltage may be insufficient.
GWARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XCarefully driveasuitable distance, making slight steering
movements, ataspeed above 12 mph (20 km/h).
If the displaymessage disappears, the functions mentioned
above are available again.
If the displaymessage continues to be displayed:
XDrive on carefully.
XVisitaqualified specialist workshop.
Inoperative See
Operator's Manual
ABS,ESP®,BAS,PRE-SAFE®,the HOLD function and hill start
assist are unavailable due toamalfunction.
The (USA only)/ (Canada only), , and
warning lamps in the instrumentcluster also light up.
ATTENTION ASSISTisdeactivated.
GWARNING
The brakesystem continues to function normally, but without the
functionslisted above. The wheels could therefore lock if you
brakehard, for example.
238Display messages
On-board computer and displays
Page 241 of 382
Display messagesPossible causes/consequences and Solutions
The steerabilityand brakingcharacteristics may be severely
affected. The brakingdistanceinanemergencybrakingsituation
can increase.
If ESP®is notoperational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skiddingand an accident.
XDriveoncarefully.
XVisitaqualified specialist workshop immediately.
Inoperative See
Operator's Manual
ESP®,BAS, PRE-SAFE®,the HOLD functionand hill start assist are
unavailable duetoamalfunction.
In addition, the and warning lamps light up in the
instrument cluster.
The self-diagnosisfunctionmight not be complete,for example.
ATTENTION ASSISTisdeactivated.
GWARNING
The brakesystem continues to function normally, but without the
functionslisted above.
The braking distanceinanemergency braking situation can thus
increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XCarefully driveasuitable distance, making slight steering
movements,ataspeed above 12 mph (20 km/h).
If the display message disappears,the functionsmentioned
above are available again.
If the display message continues to be displayed:
XDrive on carefully.
XVisitaqualified specialist workshop.
Display messages239
On-board computer and displays
Z
Page 242 of 382
Display messagesPossible causes/consequences and Solutions
Inoperative See
Operator'sManual
EBD(electronic brakeforcedistribution), ABS, ESP®,BAS,PRE-
SAFE®,theHOLD function and hill start assist are unavailable due
toamalfunction.
BASPLUSand PRE-SAFE®Brake may also havefailed.
In addition,the , and warninglampslightupin
the instrument cluster andawarning tonesounds.
GWARNING
The brake system continues to function normally, but without the
functionslisted above. The frontand rearwheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XDrive on carefully.
XVisitaqualified specialist workshop immediately.
(USA
only) (Canada
only)
Release Parking
Brake
You are driving with the parking brake applied.Awarning tone also
sounds.
XRelease theparking brake.
(USA
only) (Canada
only)
Check Brake Fluid
Level
Thereisnot enough brake fluid in the brake fluid reservoir.
In addition, the (USA only)/ (Canada only) warning
lamp lights up in the instrument cluster andawarning tone
sounds.
GWARNING
The braking effect maybeimpaired.
There isariskofanaccident.
XPull overand stop the vehiclesafelyassoonaspossible,paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
XSecure the vehicle against rolling away(Ypage 167).
XConsultaqualified specialist workshop.
XDo not add brake fluid. This does not correct the malfunction.
240Display messages
On-board computer and displays
Page 244 of 382
Display messagesPossible causes/consequences and Solutions
SRS Malfunction
ServiceRequired
There isamalfunction in theSRS (Supplemental Restraint
System). The warninglamp also lights up in theinstrument
cluster.
GWARNING
The air bags or Emergency Tensioning Devices may either be
triggered unintentionally or, in theevent of an accident, may not
be triggered.
There is an increasedriskofinjury.
XVisitaqualified specialist workshop.
For further information about SRS, see (Ypage 41).
Front Left
Malfunction
ServiceRequired
orFront Right
Malfunction
ServiceRequired
SRS has malfunctioned at the frontonthe left or right.The
warning lamp also lights up in the instrument cluster.
GWARNING
The air bags or EmergencyTensioning Devices may either be
triggered unintentionally or, in the event of an accident, may not
be triggered.
There is an increased risk of injury.
XVisitaqualified specialist workshop.
Rear Left
Malfunction
ServiceRequired
orRear Right
Malfunction
ServiceRequired
GWARNING
The air bags or EmergencyTensioning Devices may either be
triggered unintentionally or, in the event of an accident, may not
be triggered.
There is an increased risk of injury.
SRS has malfunctioned at the rear on the left or right.The
warning lamp also lights up in the instrument cluster.
XVisitaqualified specialist workshop.
Left Side Curtain
AirbagMalfunction
ServiceRequired
orRight Side
CurtainAirbag
malfunction
ServiceRequired
There isamalfunction in the left-hand or right-handwindow
curtain air bag.
The warning lamp also lights up in the instrument cluster.
GWARNING
The left or right window curtain air bag may either be triggered
unintentionally or, in the event of an accident, may not be
triggered.
There is an increased risk of injury.
XVisitaqualified specialist workshop.
242Display messages
On-boar dc omputer and displays
Page 245 of 382
Display messagesPossible causes/consequences and Solutions
Front Passenger
Airbag Disabled
See Operator's
Manual
The front-passenger air bag and front-passenger knee bag are
deactivated during thejourney, although:
Ran adult
or
Raperson larger thanacertainsizeisoccupyingthefront-
passenger seat
If additional forces are applied to theseat,thesystem may
interpret theoccupant's weight as lowerthan it actually is.
GWARNING
The front-passenger front air bag and front passenger knee bag
may not be triggered in the event of an accident.
There is an increased risk of injury.
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
XSwitch the ignition off.
XHave the occupant get out of the vehicle.
XKeep the seat unoccupied, close the front-passenger door and
switch on the ignition.
XObserve the PASSENGER AIR BAG OFF indicator lamp in the
center console and the multifunction displayand check the
following:
Seat unoccupied and ignition switched on:
Rthe PASSENGER AIR BAG OFF indicator lamp must light up and
remain lit. If the indicator lamp is on, OCS has disabled the front-
passenger air bag and front-passenger knee bag (Ypage 47).
RtheFront Passenger Airbag Enabled See Operator's
ManualorFront Passenger Airbag Disabled See
Operator's Manualdisplaymessages must not be shown in
the multifunction display.
XWait foraperiod of at least 60 seconds until the necessary
system checkshave been completed.
XMake sure that the displaymessages do not appearinthe
multifunction display.
If these conditionsare fulfilled,the front-passenger seat can be
occupied again. Whether the PASSENGER AIR BAG OFF indicator
lamp remains lit or goes out depends on how OCS classifies the
occupant.
If the conditionsare not fulfilled,the system is not operating
correctly.
Display messages243
On-board computer and displays
Z