Sat MERCEDES-BENZ CLS-Class 2007 W219 Comand Manual

Contents
CD changer main menu . . . . . . . . . 66
Selecting CDs . . . . . . . . . . . . . . . . . 67
Selecting a track . . . . . . . . . . . . . . 69
Fast forward/reverse . . . . . . . . . . . 70
Playback options. . . . . . . . . . . . . . . 70
Audio AUX operation . . . . . . . . . . . . . . 72
Satellite radio*. . . . . . . . . . . . . . . . . . 73
General information . . . . . . . . . . . . . . . 74
Introduction to Satellite radio . . . . . 74
Satellite radio operation . . . . . . . . . . . . 75
Switching to Satellite radio mode . . 75
SAT main menu . . . . . . . . . . . . . . . . 76
Selecting a station . . . . . . . . . . . . . 76
Obtaining additional text
information . . . . . . . . . . . . . . . . . . . 79
Storing stations . . . . . . . . . . . . . . . 80
Calling the Sirius Service Center . . 80
Telephone*. . . . . . . . . . . . . . . . . . . . . 81
Important notes . . . . . . . . . . . . . . . . . . 82
Safety Instructions . . . . . . . . . . . . . 82
Tips on telephone operation . . . . . 83Telephone operation. . . . . . . . . . . . . . . 85
Switching the phone ON/OFF . . . . 85
911 emergency calls. . . . . . . . . . . . 85
Entering the PIN (only GSM) . . . . . 87
Entering the unlock code . . . . . . . . 88
Switching to telephone mode . . . . 88
Telephone main menu. . . . . . . . . . . 89
Answering an incoming call . . . . . . 90
Placing an outgoing call . . . . . . . . . 91
Accepted and missed calls . . . . . . . 92
Dialed calls . . . . . . . . . . . . . . . . . . . 94
Active call . . . . . . . . . . . . . . . . . . . . 95
Phone book . . . . . . . . . . . . . . . . . . . . . 97
Opening the phone book. . . . . . . . . 97
Selecting a phone book entry and
establishing a connection . . . . . . . 98
Adding spoken names to a
phone book entry . . . . . . . . . . . . . . 99
Deleting a phone book entry . . . . . 99
SMS (Mail) . . . . . . . . . . . . . . . . . . . . . 100
SMS inbox . . . . . . . . . . . . . . . . . . . 100
Reading a message . . . . . . . . . . . . 101
Deleting a message . . . . . . . . . . . 102
Exiting from the SMS menu . . . . . 102
Navigation*. . . . . . . . . . . . . . . . . . . . 103
Important notes . . . . . . . . . . . . . . . . . 104
Safety Instructions . . . . . . . . . . . . 104
Navigation DVD . . . . . . . . . . . . . . . 105
Loading/ejecting the DVD . . . . . . 105
Travelling abroad. . . . . . . . . . . . . . 105
Route guidance with GPS . . . . . . . 106
Route guidance after
vehicle transport . . . . . . . . . . . . . . 106
Trip interruption during
route guidance . . . . . . . . . . . . . . . 106
Selection lists . . . . . . . . . . . . . . . . 107
Navigation main menu . . . . . . . . . . . . 108
Calling up the
Navigation main menu . . . . . . . . . 108
Avoiding certain road types . . . . . 109
Adjusting the acoustics for
navigation announcements . . . . . . 109
Destination entry . . . . . . . . . . . . . . . . 112
Entering data. . . . . . . . . . . . . . . . . 112
Destination entry menu. . . . . . . . . 114
Entering a destination . . . . . . . . . . 115
Selecting the region . . . . . . . . . . . 115

7
Where to find it
Introduction

Where to find it
This Operator's Manual is designed to pro-
vide support for you, the COMAND opera-
tor. Each chapter has its own guide color to
provide fast access to information.
At a glance
Here you will find an overview of all
COMAND control elements and system
components. If you are operating
COMAND for the first time, or if you have
rented or borrowed the vehicle, this is the
chapter you should read first.
Audio
Here you will find all the information on
how to use the audio system and its radio
and CD components.
Satellite radio*
This chapter contains all information relat-
ed to the satellite radio system.
Telephone*
Here you can learn in detail about the
many functions of the telephone, SMS,
how to initiate an emergency call and use
service numbers.
Navigation*
This chapter provides detailed information
covering the following topics:
Destination entry
Route selection and calculation
Route guidance
Destination memory
Service
This chapter contains information con-
cerning Tele Aid*.
System
This chapter provides information on how
to adjust COMAND system settings.
Directories
The glossary explains the most important
technical terms.
The table of contents and index directory
will help you quickly locate the information
you need.

9 Introduction
Operating safety

Operating safety
WarningG
Any alterations made to electronic compo-
nents and the software can cause malfunc-
tions.
The radio, amplifier, satellite radio*,
CD changer*, navigation module*, tele-
phone* and voice control system* are inter-
connected. Therefore, when one of the
components is not operational or has not
been removed/ replaced properly, the func-
tion of other components may be impaired.
This condition might seriously impair the
operating safety of your vehicle.
We recommend that you have any service
work on electronic components carried out
by an authorized Mercedes-Benz Center.
WarningG
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the system only when road,
weather and traffic conditions permit.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
COMAND supplies you with information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we encour-
age the driver to stop the vehicle in a safe
place before answering or placing a call, or
consulting the COMAND screen to read nav-
igational maps, instructions, or downloaded
information.
WarningG
While the navigation system provides direc-
tional assistance, the driver must remain
focused on safe driving behavior, including
attention to traffic and street signs, and
should utilize the system's audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. This al-
ways remains your personal responsibility
when you drive. DVD maps do not cover all
areas nor all routes within an area.

24 At a glance
Multifunction steering wheel
E-Class illustrated
FunctionPage
1 Multifunction display
2 Volume setting:
ç Volume down
æ Volume up
29
29
3 Making calls:
s Answering calls
Redialing
t Ending or refusing
calls
Entering a phone num-
ber:
t Deleting the entire
entry
90
92
91
91
4 Multifunction display
menu change:
è forward
ÿ back
25
25
FunctionPage
5 Radio mode:
j Next station
k Previous station
via station search
via station presets
38
39
5Single CD, CD changer*
and MP3 mode:
j Next track
k Previous track
69
69
5Satellite radio* mode:
j Next station
k Previous station
79
79
5Telephone* mode:
j Next list entry
k Previous list entry
94
94

25 At a glance
Multifunction steering wheel
Switch the multifunction display to the re-
spective system if you wish to operate the
system using the buttons on the multifunc-
tion steering wheel.
On the multifunction steering wheel,
pressè or ÿ repeatedly until
one of the following, Radio, Single CD,
MP3, CD changer*, Satellite radio* or
Telephone* display appears in the mul-
tifunction display of the instrument
cluster.
Radio operation
1Waveband and position in Preset menu
2Station frequencySingle CD operation
1Single CD operation
2Current track
CD changer* operation
1Current CD
2Current trackMP3 operation
1MP3 operation
2Current track
Selecting the multifunction display
i
Depending on vehicle production date
COMAND may not be equipped with
the MP3 functionality. If so, the CD
changer* may be used for playback of
MP3 CDs.

26 At a glance
Multifunction steering wheel
Satellite radio* operation
1SAT and position in Preset menu
2Channel name
Telephone* operation
Either the main display, or a list appears on
display.
Telephone main display:In the list screen, instead of the READY mes-
sage, either a phone book entry or one of
the last 10 outgoing calls will be displayed.
In order to close the list display,
presst
.
This switches to the telephone main
display.
The following functions are available:
Freq. function:
You can tune to stations via the station
search (
page 38).
Memory function:
You can tune to stations via the station
presets (
page 39).
Setting audio search function
On the multifunction steering wheel,
pressè or ÿ repeatedly until
the
Settings... menu appears in the
multifunction display in the instrument
cluster.
Pressj and switch to the submenu
options.
Press æ or ç and select the
Vehicle menu.
Pressj and select Audio Search
Function
.
By pressing æ or ç, select Freq.
or
Memory.Audio search function
i
Memory is set at the factory.

27 At a glance
Menu system

Menu system
The menu system allows for easy opera-
tion of COMAND.
Each of the following main functions has a
main menu:
Audio
(Radio, Single CD, CD changer* and
AUX mode)
Satellite radio*
Telephone*
Navigation*
Service
Opening main menus
Audio (page 36):
Press -.
Satellite radio* (page 73):
Press ;.
Telephone* (page 89):
Press 2.
Navigation* (page 108):
Press 5.
Service (page 159):
Press <.
Menu display
A display can be composed of 3 sections.
Example: Radio main menu
1Soft key sections
2Main area
3Status bar
The functions currently assigned to the
soft keys are displayed in the soft key sec-
tions 1.Messages or settings are displayed in the
main area 2.
The settings can be changed by operating
controls accordingly.
The status bar 3 is divided into three ar-
eas.
Left side:
The selected operating mode is given. In
this example: Radio
Center:
Indication of the selected operating mode.
In this example:
FM = selected waveband
1 = selected station is stored on
preset 1
i
A maximum of five soft keys may be
displayed on each side of the main area
2.

29 At a glance
Quick reference COMAND

Quick reference COMAND
Switching ON
Turn the key in the steering lock to po-
sition 1 or 2,
or
Press).
COMAND switches on the last active
system and displays the corresponding
menu.
Switching OFF
Turn the key in the steering lock to po-
sition 0 and remove it,
or
Press).Different volume settings are possible for
Navigation*, Telephone*, or Voice con-
trol*.
A common volume setting is provided for
Radio, Single CD, MP3, CD changer*, AUX
and Satellite radio* operating modes.
When setting the volume, the system auto-
matically stores the setting for the current-
ly active operating mode. The volume of
navigation announcements can be
changed only during an actual announce-
ment.
i
The system can be operated as follows:
from COMAND itself, or
from the multifunction steering
wheel
This operating manual describes oper-
ation from COMAND and from the mul-
tifunction steering wheel.
Unless otherwise specified, the de-
scriptions and the displays illustrated
relate to the COMAND control unit.
Switching ON/OFF
i
Without the key in position 1 or 2 of the
steering lock, the system automatically
switches OFF again after approx. 30
minutes of inactivity.
i
If a telephone call is in progress (hands-
free) you cannot switch the COMAND
OFF, ) is disabled.
Volume

30 At a glance
Quick reference COMAND
Setting the volume
Turn the rotary control* located on
the COMAND control unit,
or
Pressæ or ç on the multifunc-
tion steering wheel
The volume changes up or down, de-
pending on the direction of rotation or
which button was pressed.
The system stores the volume settings
when the device is switched OFF.
After switching the system back on again,
the volume may be lower than at the time
when the system was switched OFF.
This could be the case if:
the system was switched OFF for more
than 15 minutes, and
the volume had been set t o a value in a
certain range at the time the device
was switched OFF.
Automatic volume control
The automatic volume control adjusts the
volume depending on
the vehicle’s speed (only in vehicles
without Sound-system*),
or on
the interior ambient noises of the vehi-
cle (only in vehicles with Sound-sys-
tem*)
other parameters (e.g. windows open
or closed)A common balance and fader setting ap-
plies to the following operating modes:
Radio
Single CD
MP3
CD changer*
AUX
Satellite radio*
When adjusting the balance or the fader,
the system automatically stores the set-
ting for the currently active operating
mode.
Balance and fader
i
For Navigation* a different balance/
fader setting is possible. You find the
description under “Adjusting the
acoustics for navigation announce-
ments” (
page 109).

31 At a glance
Quick reference COMAND
Setting balance/fader
Open the main menu of the appropriate
operating mode (
page 27).
Press the Bal/Fad soft key.
The Balance/Fader menu is displayed.
Now you can set the balance and the
fader (
page 31).
A cross-hair cursor appears. The verti-
cal line indicates the balance setting.
The horizontal line indicates the fader
setting.
Press# or $:
The cursor moves horizontally, adjust-
ing the desired balance,
or
Press% or &:
The cursor moves vertically, adjusting
the fader.
Storing new settings:
Press' or the Back soft key,
or
wait until the display changes.For the following operating modes, differ-
ent settings for bass and treble can be se-
lected:
Radio (FM waveband)
Radio (AM waveband)
Radio (Weather Band)
Single CD
MP3
CD changer*
AUX
Satellite radio*
Navigation*
Bass and treble settings for navigation an-
nouncements are found under “Adjusting
the acoustics for navigation announce-
ments” (
page 109).
i
Using 7 and 8, the cursor can be
moved simultaneously in vertical and
horizontal direction (diagonally).
Bass and treble