stop start MERCEDES-BENZ CLS-Class 2014 W218 Repair Manual

to the tire
sorchassiscomponents.
Components damage dinthisw ayma yfail
unexpectedly .There is arisk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged
tires or chassis components replaced
immediately. Mounting
awheel
Preparing the vehicle X
Stop the vehicle on solid, non-slippery and
leve lground.
X Apply the parking brake.
X Bring the front wheels into the straight-
ahead position.
X Shift the transmission to position P.
X Vehicles with AIRMATIC :make sure that
"normal" leve lisselecte d(Ypage 189).
X Switch off th eengine.
X Vehicles without KEYLESS-GO: remove
th eS martKey from th eignition lock.
X Vehicles with KEYLESS-GO: open the
driver' sdoor.
The on-board electronics no whave status
0.T his is the same as the SmartKey having
been removed.
X Vehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock
(Y page 147).
X If included in the vehicle equipment,
remove the tire-change tool kit from the
vehicle (Y page 320).
X Secure the vehicle to prevent it from rolling
away. Securing the vehicle to prevent it from
rolling away If your vehicle is equipped with
awheel chock,
it can be found in the tire-change tool kit
(Y page 320).
The folding wheel chock is an additional
safety measure to prevent the vehicle from
rolling away,f or example when changing a
wheel.
X Fold both plates upwards 001A.
X Fold out lower plate 0010.
X Guidet he lugs on the lower plate fully into
the openings in base plate 0024. Securing the vehicle on level ground
X
On level ground: place chocksorother
suitable items under the front and rear of
the wheel that is diagonallyo pposite the
wheel you wish to change. 358
Changing
awheelWheels and tires