wiper blades MERCEDES-BENZ CLS63AMG 2008 W219 Owner's Manual

Contents
Maximum tire inflation pressure .. 320
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 321
Tire ply material ........................... 323
Tire and loading terminology ........ 323
Rotating tires ............................... 326
Winter driving .................................... 328
Winter tires .................................. 328
Block heater* (Canada only) ........ 329
Snow chains................................. 329
Maintenance ...................................... 330
Maintenance service indicator
message....................................... 330
Calling up the maintenance
service indicator........................... 331
Resetting the maintenance
service indicator........................... 332
Vehicle care ....................................... 333
Cleaning and care of vehicle ........ 333
Practical hints.................................. 343
What to do if … ................................... 344
Lamps in instrument cluster ......... 344
Lamp in center console................. 356
Vehicle status messages in the
multifunction display..................... 358
Where will I find...? ............................. 393
First aid kit .................................... 393
Spare wheel .................................. 393
Vehicle tool kit .............................. 395
Luggage box ................................. 397
Unlocking/locking in an emergency... 398
Unlocking the vehicle.................... 398
Locking the vehicle ....................... 399
Fuel filler flap emergency release . 400
Manually unlocking the gear
selector lever ................................ 400
Resetting activated head restraints .... 401
Replacing SmartKey batteries ............ 402
Replacing bulbs .................................. 404
Bulbs ............................................. 404
Replacing bulbs for front lamps .... 407
Replacing bulbs for rear lamps ..... 409
Replacing wiper blades....................... 410
Wiper blades ................................. 410Flat tire............................................... 412
Preparing the vehicle .................... 412
Mounting the spare wheel ............ 412
MOExtended system* ................... 419
Battery ............................................... 420
Disconnecting the battery ............ 421
Removing the battery ................... 421
Charging and reinstalling the
battery .......................................... 422
Reconnecting the battery ............. 422
Jump starting...................................... 423
Towing the vehicle.............................. 425
Installing towing eye bolt .............. 426
Fuses.................................................. 428
Fuse box in passenger
compartment ................................ 429
Fuse box in trunk .......................... 429

23 At a glance
Exterior view
ItemPage
1Trunk

Unlocking100

Opening and closing109

Spare wheel393

Vehicle tool kit395
2Rear lamps404
3Rear window, defrosting191
4Fuel filler flap283

Fuel requirements451
5Doors

Locking and unlocking100

Opening and closing108
ItemPage
6Towing eye bolt395

Installing towing eye bolt425
7Rims and tires

Checking tire inflation
pressure303

Flat tire412
8Front lamps404
9Hood, opening286

Engine oil287

Coolant290
aWindshield wipers56

Wiper blades, replacing410

Wiper blades, cleaning338
ItemPage
bWindow, cleaning338
cPower tilt/sliding sunroof210
dExterior rear view mirrors

Adjusting47

Auto-dimming183

Parking position184
eSide marker lamps404

56 Getting started
Driving
Windshield wipers
The combination switch is located on the
left of the steering column.
Combination switch
1Single wipe
Wiping with washer fluid
2Switching on windshield wipers
Switch on the ignition (page 38).Switching on windshield wipers
Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
MWindshield wipers off
USlow intermittent wiping
Rain sensor operation with low
sensitivity.
VFast intermittent wiping
Rain sensor operation with high
sensitivity.
uSlow continuous wiping
tFast continuous wiping
iTo signal minor directional changes such as
changing lanes, press combination switch only
to point of resistance and release. The corre-
sponding turn signals will flash three times.!Do not operate the wipers when the wind-
shield is dry. Dust that accumulates on a wind-
shield might scratch the glass and/or damage
the wiper blades when wiping occurs on a dry
windshield. If it is necessary to operate the wip-
ers in dry weather conditions, always operate
the wipers with washer fluid (
page 57).
!If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off immediate-
ly.

For safety reasons, stop the vehicle in a safe
location

turn off the engine by turning the
SmartKey to position0 and withdraw
SmartKey from starter switch
or

turn off the engine by pressing the
KEYLESS-GO* start/stop button and
open the driver’s door (with the driver’s
door open, starter switch is in
position0, same as with SmartKey re-
moved from starter switch)
before attempting to remove any blockage.

Remove blockage.

Turn the windshield wipers on again.
!If windshield wipers fail to function at all in
combination switch positionU or V,

set the combination switch to the next high-
est wiper speed

have the windshield wipers checked at the
nearest authorized Mercedes-Benz Center


57 Getting started
Driving
Intermittent wiping
Only switch on intermittent wiping under
wet weather conditions or in the presence
of precipitation.Intermittent wiping interval is dependent
on wetness of windshield.
Turn the combination switch to
positionU or V.
After the initial wipe, pauses between
wipes are automatically controlled by the
rain sensor.Single wipe
Press the combination switch briefly in
direction of arrow1 (
page 56) to
the resistance point.
The windshield wipers wipe one time
without washer fluid.
Wiping with washer fluid
Push the combination switch in direc-
tion of arrow1 (
page 56) past the
resistance point.
The windshield wipers operate with
washer fluid.
For information on filling up the washer
reservoir, see “Washer system and
headlamp cleaning system*”
(
page 292).
!Do not leave windshield wipers in
intermittent setting when the vehicle is taken to
an automatic car wash or during windshield
cleaning. Windshield wipers will operate in the
presence of water sprayed on the windshield,
and windshield wipers may be damaged as a re-
sult.
!If you have set intermittent wiping, dirt on
the surface of the rain sensor or optical effects
may cause the windshield wipers to wipe in an
undesired fashion. This could then damage the
windshield wiper blades or scratch the windows.
You should therefore switch off the windshield
wipers when weather conditions are dry.
iIntermittent wiping is interrupted when the
vehicle is at a standstill and a front door is
opened. This protects persons getting into or out
of the vehicle from being sprayed.
Intermittent wiping will be continued when

all doors are closed
and

the gear selector lever is in positionD orR
or

the wiper setting is changed using the com-
bination switch
iTo prevent smears on the windshield or
noisy/chattering wiper blades, wipe with washer
fluid every now and then even when it is raining.

338 Operation
Vehicle care
Cleaning the windows and the wiper
blades
Make sure the hood is fully closed.
Switch on the ignition (page 38).
Turn combination switch to wiper
settingu (
page 56).
With wiper arms in vertical position,
switch off the ignition (
page 60).Fold the wiper arms forward until they
snap into place.
Clean the wiper blade inserts with a
clean cloth and detergent solution.
Use a soft, clean cloth and a mild win-
dow cleaning solution on all outside
and inside glass surfaces.
An automotive glass cleaner is recom-
mended.
!Do not apply strong pressure to the sensor
covers. Applying strong pressure may damage
the sensor covers.
Follow the instructions provided by the power
washer manufacturer on maintaining a distance
between the vehicle and the nozzle of the power
washer.
!To prevent scratches, never apply strong
force and only use a soft, non-scratching cloth
when cleaning the sensors. Do not attempt to
wipe dirty sensors with a dry cloth or sponge.
!The windshield wipers must be in a vertical
position before folding them away from the wind-
shield. They could otherwise damage the hood.
Never open the hood when the wiper arms are
folded forward.
Warning!G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before cleaning the windshield
and/or the wiper blades. Otherwise, the
wiper motor could suddenly turn on and
cause injury.
!Do not pull on the wiper blade inserts. They
could tear.

343 Practical hints
What to do if …
Where will I find...?
Unlocking/locking in an emergency
Resetting activated head restraints
Replacing SmartKey batteries
Replacing bulbs
Replacing wiper blades
Flat tire
Battery
Jump starting
Towing the vehicle
Fuses

410 Practical hints
Replacing wiper blades
Wiper bladesTurn the SmartKey in the starter switch
to position1.
Turn combination switch to wiper
settingu (
page 56).
With wiper arms in the vertical position,
turn SmartKey in the starter switch to
position0.
Wiper blades in vertical position
Remove SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
Make sure the vehicle’s on-board
electronics have status0.
Warning!G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: make sure the
vehicle’s on-board electronics have
status0) before replacing a wiper blade.
Otherwise, the wiper motor could suddenly
turn on and cause injury.
Warning!G
Wiper blades are components that are sub-
ject to wear and tear. Replace the wiper
blades twice a year, preferably in the spring
and fall. Otherwise the windows will not be
properly wiped. As a result, you may not be
able to observe surrounding traffic condi-
tions and could cause an accident.
!Never open the hood when the wiper arms
are folded forward.
Hold on to the wiper when folding the wiper arm
back. If released, the force of the impact from
the tensioning spring could crack the windshield.
Do not allow the wiper arms to contact the wind-
shield glass without a wiper blade inserted.
For your convenience, we recommend that you
have this work carried out by an authorized
Mercedes-Benz Center.
!To avoid damage to the hood the wiper arms
should only be folded forward when in the verti-
cal position.

411 Practical hints
Replacing wiper blades
Removing
Fold the wiper arm forward until it
snaps into place.
Turn the wiper blade at a right angle to
wiper arm.
Slide the wiper blade sideways out of
the retainer.Installing
Slide the wiper blade onto wiper arm
until it locks in place.
Rotate the wiper blade into position
parallel to wiper arm.
Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
!Do not pull on the wiper blade inserts. They
could tear.
!Make sure that the wiper blades are proper-
ly installed. Improperly installed wiper blades
may cause windshield damage.

464 Index
Head restraints 118
Active head restraints 81
Comfort head restraint*,
Adjusting 44
Folding back 119
Front seat, Adjusting 43
Front seat, Removing
Rear seat, Removing and
installing 118
Headlamp cleaning system* 183
Headlamp shut off delay see Delayed
shut-off, Exterior lamps 161
Headlamps
Automatic headlamp mode 127
Bi-Xenon headlamps, Active 126
Cleaning lenses 337
Cleaning system* 183
Halogen 405
High beam 55
High beam flasher 55
High beam see High beam headlamps
Low beam 55
Manual headlamp mode 127
Replacing bulbs 404
Switch 55Headliner and shelf below rear window,
cleaning 340
Heated seats* 121
Heated steering wheel (Canada
only) 251
Height adjustment
Head restraints 43
Seats 42
Steering wheel 44
Vehicle level control 231
High beam flasher 55, 130
High beam headlamps
Replacing bulbs 408
Switching on 55, 130
High mounted brake lamp 406
High-performance brake system
(CLS 63 AMG only) 274
Hood 286
Message in display 372
Horn 25
HVAC see Climate control system
Hydroplaning 276
I
Identification labels 434
Identification Number, Vehicle (VIN) 435
Ignition 38, 40Immobilizer 97
Indicator lamps see Lamps, indicator and
warning
Infant and child restraint systems see Chil-
dren in the vehicle
Inflation pressure see
Tires, Inflation pressure 301
Information button (Tele Aid) 260
Inside door handle 108
Installing
Wiper blades 411
Instrument cluster 26, 136
Coolant temperature indicator 137
Illumination brightness 136
Lamps 344
Messages in the multifunction
display 358
Multifunction display 139
Outside temperature indicator 138
Instrument lighting see Instrument cluster,
Illumination brightness 136
Instrument panel see Instrument
cluster 136
Instruments and controls see
Cockpit 136

475 Index
Vehicle loading
Cargo tie-down hooks 242
Instructions 238
Load limit 296
Roof rack* 238
Ski bag* 239
Terminology 323
Vehicle maximum load on the tire 326
Vehicle Recovery services, Stolen (Tele
Aid) 262
Vehicle status message memory 151
Vehicle tool kit 395
Vehicle washing 333
W
Warning lamps see Lamps, indicator and
warning
Warning sounds
Distance warning function* 226
Distronic* 220
Driver’s or passenger’s seat belt 79
Parking brake 53
Parktronic* 234
Seat belt telltale 352
Warranty coverage 433Washer fluid 292
Refilling 292
Wiping 57
Washer reservoir level 292
Washer system 57
Washing the vehicle 333
Wear pattern, Tires 327
Weights, Vehicle 447
Wheel
Change 412
Removing 415
Spare 393
Tightening torque 418
Wheels, Sizes 439
Wheels, Tires and 293
Window curtain air bags 70
Windows see Power windows
Windows, cleaning 338
Windshield
Cleaning wiper blades 338
Defogging 197
Windshield washer fluid
Messages in display 391
Windshield washer fluid see Washer fluidWindshield wipers 56
Cleaning wiper blades 338
Replacing wiper blades 410, 411
Wiping with washer fluid 57
Winter driving
Block heater* (Canada only) 329
Snow chains 329
Tires 328
Winter driving instructions 278
Winter tires 328
Wood trims, cleaning 341
X
Xenon headlamps see Headlamps, Bi-Xe-
non