change time MERCEDES-BENZ E-Class 2004 W211 Comand Manual

143 Service
Data entry
Moving the cursor to any position in a
text
Press the Keypad soft key:
The mode is changed to text.

Press or :
The cursor moves to the left or to the
right in the text.

Press the Keypad soft key:
The mode is now reversed from text
mode to keypad mode.
Deleting characters

Move the cursor behind the character
to be deleted (
page 144).

Press the Delete soft key.
The character to the left of the input
cursor is deleted.Inserting characters

Move the cursor to the desired posi-
tion.

Enter the character to be inserted as
described under “Entering characters”
(page 142).
Exiting the Selection menu

Press the Back soft key,
or

Use and  or  to select the
field .

Press.
In both cases the system accepts the
data entered.Upper and lower case characters, accent-
ed characters, special characters, and
numbers can be entered.
Entering characters

Use the or
-  keys to enter
a character.
A key must be pressed once or several
times in quick succession:
ok
Entry via 12 button keypadi Example: key:
1 depression = J
2 depressions = K
3 depressions = L
4 depressions = 5


144 ServiceData entry
After pressing the first time, the char-
acter display appears.
You can see which characters can be
entered when using the keys.
Each additional depression moves you
to the next character.

If necessary, press$.
This switches between upper and lower
case characters.

Wait until the character display disap-
pears,
or

Press.
The character is entered.Moving the cursor to any position in the
text

Press the Keypad soft key:
The mode changes to text.

Press or :
The cursor is moved to the left or to the
right in the text.

Press the Keypad soft key again:
The mode now reverses from text
mode to keypad mode.
Deleting characters

Move the cursor behind the character
to be deleted (
page 144).
The characters to the left of the input
cursor are deleted.Inserting characters

Move the cursor to the desired posi-
tion.

Enter the character to be inserted as
described under “Entering characters”
(page 143).
Exiting the Selection menu

Press the Back soft key.
or

Use and  or  to select the
field .

Press.
In both cases, the system accepts the
data entered.
iUse to enter a space “ ”.
ok

149 System
System settings
Setting the time
The UTC time transmitted by the GPS sat-
ellites has to be set to the local time zone.
This enhances
correct navigation for routes with time-
dependent traffic guidance, and

correct calculation of the estimated
time of arrival.

Use or  to select the hours or
the minutes.

Press or .
Depending on the selection, hours or
minutes are set.
Setting the minutes:
With GPS reception, each time you
press  or  changes the time in in-
crements of 30 minutes. Without GPS
reception, the time is changed in 1
minute increments.
Setting the hours:
Each time you press  or , the
hours change in increments of 1 hour.

Press the Back soft key.
The new setting is stored.Setting the date

Use or  to select the day, the
month or the year.

Press or .
Depending on the selection, the day,
the month, or the year is set.

Press the Back soft key.
The new setting is stored.
Date/Time format

Press the Format soft key.
You will see the date and time following
the currently selected format, as well
as a list of possible formats.
iThere is no automatic change from day-
light saving time to standard time.
This has to be changed manually.
When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.
iThe date can be set only if GPS recep-
tion is available.


150 SystemSystem settings
Setting the format: 
Use or  to select a format.

Press.
The appropriate format is selected.

Finally, press the Back soft key.
The language setting changes the display
language as well as the language used for
voice instructions in navigation announce-
ments.

In the System menu, press the
(page 148) Lang. soft key.
The language list is displayed.

Use or  to select an entry.

Press.

Instr. cluster settings:
The system switches to the language
already set in the vehicle instrument
cluster.

Other options:
The system switches to the requested
language.

Finally, press the Back soft key.
iList entry 1-3:
Date formats
List entry 4 and 5:
Time formats
Solid circle : format set
Empty circle : format not set
Setting the language

152 SystemSystem settingsSetting the display dimming
characteristics
You can select from 3 display dimming
modes:
Day mode:
The display is constantly set to daytime
design.

Night mode:
The display is constantly set to night-
time design.

Automatic:
The display will change depending on
the illumination of the instrument clus-
ter.

Use or  to select an entry.

Press.Adjusting display brightness

In the Display Settings menu, press the
Bright. soft key.
The Brightness display appears.

Press or .
The brightness changes accordingly.

Press the Back soft key.
The new setting is stored.Use this function to:

start or delete voice control individual-
ization (
page 153)

activate/deactivate the voice control
help window
Activate/deactivate the help window

Open the System menu (
page 148).

Press the VC tips soft key.
The Voice control menu appears. Voice control settings

155 System
System settings
Canceling individualization
You can cancel individualization at any
time during either the first or second
stage. All existing data remains un-
changed.
During any individualization stage,
press the Cancel soft key.
Individualization is cancelled.
Deleting individualization

From the Individualization menu,
press to selec t m enu it em Delete
individualization.

Press.
A prompt appears, which asks if you re-
ally want to delete the data.

Press to select Yes.

Press.
The individualization is deleted.Actuating the Reset function resets CO-
MAND to the factory settings.
In addition, it deletes:

SMS: All SMS messages.

Navigation*: All entries in the Destina-
tion memory and in the Last destina-
tion memory.
Reset activation

Call up the System menu (
page 148).

Press the Reset soft key.
iThis function is not available if no indi-
vidualization data has been saved.
Reset function


164 IndexSwitching
Display design . . . . . . . . . . . . . . . . . 152
Map scale . . . . . . . . . . . . . . . . . . . . 119
Multifunction display . . . . . . . . . . . . . 23
Telephone book display . . . . . . . . . . 86
to Audio AUX mode . . . . . . . . . . . . . . 60
to CD changer* mode . . . . . . . . . . . . 49
to navigation* mode . . . . . . . . . . . . . 98
to radio mode . . . . . . . . . . . . . . . . . . 35
to Single CD mode . . . . . . . . . . . . . . 43
to telephone* mode . . . . . . . . . . . . . 76
Waveband (radio) . . . . . . . . . . . . . . . 35
Switching off
COMAND. . . . . . . . . . . . . . . . . . . . . . 28
Detour function (Navigation) . . . . . . 124
GPS position display . . . . . . . . . . . . 130
Hands-free microphone . . . . . . . . . . 84
Mute function . . . . . . . . . . . . . . . . . . 34
Navigation announcements . . . . . . 117
Telephone* . . . . . . . . . . . . . . . . . . . . 73Switching on
COMAND . . . . . . . . . . . . . . . . . . . . . . 28
Detour function (Navigation) . . . . . . 123
GPS position display . . . . . . . . . . . . 130
Mute function . . . . . . . . . . . . . . . . . . 34
Navigation announcements. . . . . . . 117
Sound functions . . . . . . . . . . . . . . . . 31
Telephone* . . . . . . . . . . . . . . . . . . . . 73
Switching the hands-free
microphone off. . . . . . . . . . . . . . . . . . 84
Switching the multifunction display 23
Switching waveband (radio). . . . . . . 35
System settings. . . . . . . . . . . . . . . . 148
T
Tele Aid* . . . . . . . . . . . . . . . . . . . . . . 145
Telephone* operation . . . . . . . . . . . . 73
Telephone*
switching off . . . . . . . . . . . . . . . . . . . 73
switching on . . . . . . . . . . . . . . . . . . . 73Telephone book . . . . . . . . . . . . . . . . . 85
deleting entry . . . . . . . . . . . . . . . . . . 87
new entry . . . . . . . . . . . . . . . . . . . . . 87
selecting an entry . . . . . . . . . . . . . . . 86
switching the display . . . . . . . . . . . . . 86
Telephone* mode
Controls. . . . . . . . . . . . . . . . . . . . . . . 18
switching to . . . . . . . . . . . . . . . . . . . . 76
Terminating
Call . . . . . . . . . . . . . . . . . . . 79, 83, 84
Track-Mix (CD) . . . . . . . . . . . . . . . 47, 58
Transmitting
Number sequences
(telephone* mode) . . . . . . . . . . . . . . 84
Treble. . . . . . . . . . . . . . . . . . . . . . . . . . 30
U
Universal Time Coordinated UTC . . 149