ECO mode MERCEDES-BENZ E-Class 2005 W211 Comand Manual

88 Telephone*Telephone operation
If the input is correct, the telephone
will log itself into the network.
If the input is incorrect, message Wrong PIN number
will appear briefly.

Re-enter the PIN.
After three incorrect entries, the SIM
card is blocked. Message
SIM card
blocked
will appear briefly.


The PUK has to be entered.
(Telephone Operation Guide)The unlock code protects the telephone
against unauthorized use. The unlock code
can be activated on the telephone
(
Telephone Operation Guide).
Commit your unlock code to memory.
The telephone functions are available only
after entering the unlock code.
Example: unlock code 2307

In sequence, press the number
keys!, ", and .
In case of erroneous entry, delete the
last or more digits:
Press the
Delete
soft key as often as
required.
iThe telephone cannot be used before it
is logged- in.
Entering the unlock code iThe system switches back to last mode
if the unlock code is not entered within
8 seconds after you are prompted to do
so.

130 Navigation*Route guidanceYou can start route guidance when the
destination input is complete and Start Route Guidance
is displayed at the bot-
tom of the main area.
Besides starting route guidance following
soft keys are available:

Mode
soft key
Provides access to the route mode set-
ting for certain road types to be avoid-
ed (page 111).

Save
soft key
Stores the entered destination in the
destination memory (
page 148).

To start route guidance, press .
The route is calculated and route guid-
ance begins.
Depending on the distance to the destina-
tion, route calculation can take some time.
While the route is being calculated,
Reading
Navi DVD... Please Wait
and an arrow pointing
towards the destination are displayed.
Once route calculation is complete, route
guidance begins.
Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con-
ditions at the time of DVD production. DVD
maps may not cover all areas nor all routes
within an area.
The system will calculate a new route dur-
ing active route guidance if the driver fails
to follow the route guidance.
During recalculation,
NEW RTE
is displayed.
The arrow is not solid.
Start route guidance menu
Route calculation
Route re-calculation

131 Navigation*
Route guidance
After route calculation, the system assists
route guidance using pictorial displays and
navigation announcements.Current navigation announcements
If a navigation announcement is not readily
understood, it can be repeated at any time.

Press .
The current navigation announcement
is repeated.
Cancelling navigation announcements

Press .
The current announcement is can-
celled.
The next navigation announcement will
again be audible.
Switching navigation announcements
ON/OFF
Switching OFF

During a navigation announcement,
press  for approx. 2 seconds.For a short period of time, the message
Voice announcements muted
is displayed.
Now further route guidance takes
place using only the symbols in the dis-
play. If a new route guidance cycle is
started, the announcements are auto-
matically switched ON again.
Switching ON manually

Press .
The navigation displays are visible only
with activated route guidance.

To switch to the navigation display
from another display, e.g. from CD
mode, pressor .
Two display examples are shown below.
Navigation announcementsWarning
G
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.
Navigation displays

173 Glossary
Root directory
The uppermost directory on a storage
medium.
Scan rate (MP3)
Indicates the frequency at which volt-
age samples are taken during the con-
version of an analog signal into a digital
signal. The analog-to-digital converter
converts the samples into digital sig-
nals.
SCAN search
Plays receivable radio stations, or CD
tracks in succession, each for approx.
8 seconds.
SIM
(S
ubscriber I
dentity M
odule)
Card provided by the GSM telephone
service provider. Necessary for access-
ing a mobile communication network.
SMS
(S
hort M
essage S
ervice)With this function, you can receive,
read and delete short text messages
(if SMS service is provided by your ser-
vice provider).
Soft keys
Keys to activate different functions,
depending on the selected operating
mode.
Tele Aid
(Tele
matic A
larm I
dentification on D
e-
mand)
The Tele Aid system consists of three
types of response: automatic and man-
ual emergency, roadside assistance
and information. Tele Aid is initially
activated by completing a subscriber
agreement and placing an acquain-
tance call.
The Tele Aid system is operational pro-
vided the vehicle's battery is charged,
properly connected, not damaged and
cellular and GPS coverage are avail-
able.Telematics
Compound word made up of the terms
Telecommunication and Informatics.
Unlock code
Your unlock code prevents unautho-
rized persons from using your tele-
phone. The unlock code is a number
string, which you have to enter when
switching on the telephone.
UTC
(U
niversal T
ime C
oordinated)
The mean sun time associated with lon-
gitude zero (world time). It functions as
basis for the time zones.
WB
Weatherband