change time MERCEDES-BENZ E-Class 2005 W211 Comand Manual

78 Satellite radio*Satellite radio operationExample 2: category
POP

In the station list, only channels of catego-
ry
POP
are available (category mode).

Use or  to select the category POP
from the list.
If the station listened to before was of
POP

category, the channel remains tuned.
Otherwise the system switches to the sta-
tion of
POP
category that was selected last
in this category.The system will automatically switch to a
station of
POP
category if the currently se-
lected station is not of the
POP
category.
Otherwise, the currently selected station
remains tuned.
Tuning a station within the selected
category
The channels identified for the currently
selected category are sorted numerically
by channel number, which appear in the
status bar one at a time.
Tuning using COMAND control unit

Press or .
The search proceeds in ascending or-
der.
or

Press or .The search proceeds in descending or-
der and stops at the first receivable
station.
Tuning using the multifunction steering
wheel

Switch the multifunction display in the
instrument cluster to Satellite radio
display (
page 25).

Pressk.
The search proceeds in ascending or-
der.
oriUsing oris followed by a short
delay before the change occurs. Using
 and changes the channel
immediately.

99 Telephone*
Phone book
The following options are now available:
Switching between number and
name(
page 99).

Selecting a phone book entry and est-
sablishing a connection(
page 99).

Adding spoken names to a phone book
entry (
page 100). This option is only
available for vehicles with voice control
system*.

Deleting a phone book entry
(page 100).
Switching between number and name

Open the phone book from COMAND
(page 98).

Press the
123
soft key.
This switches the display to number
display. The name of the highlighted
entry is shown in the status bar;
or

Press the
ABC
soft key.
This switches the display to name dis-
play. The number of the highlighted en-
try is shown in the status bar.
On the COMAND control unit

Open the phone book (
page 98).
A list of phone book entries appears,
beginning with a specific first letter (ini-
tial).
Changing initials

Press or  once or repeatedly.
Each time you press the button, the
display changes to the next letter up or
down. At the end of the list of letters is the
category
Other
. This category combines
all entries without a name, or entries
whose names start with a special char-
acter (e.g.
* or
#).
Selecting an entry

If necessary, change the initial letter
(page 99).

Select an entry using  or .
If you press and hold either one of the
buttons, the scrolling up or down accel-
erates.
Establishing a connection

Press.
The telephone initiates the connection
with the appropriate number.
Selecting a phone book entry and es-
tablishing a connection

107 Navigation*
Important notes
COMAND calculates the route with the
help of data that is stored on the naviga-
tion DVD.
Only use Mercedes-Benz navigation DVDs
designed for the E-Class (211) COMAND
system. No other CDs or DVDs will work.
Using other navigation CDs or DVDs might
lead to malfunctions.
Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.
As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con-
ditions at the time of DVD production. DVD
maps do not cover all areas nor all routes
within an area.The DVD is loaded into (and ejected from)
the navigation module.
The navigation module is mounted on the
left-hand side of the trunk.
1Ejecting DVDs
2DVD slotLoading

Insert the DVD into the DVD slot 2
with the label facing up.
The navigation computer pulls the DVD
in.
Ejecting

Press and wait until the navigation
computer ejects the DVD.
Navigation DVD
Loading/ejecting the DVD
iYour Navigation DVD drive has been
designed to play DVDs which corre-
spond to the IEC 60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.

108 Navigation*Important notesThe navigation DVD covers the continental
U.S., Hawaii and Canada.
Contact your Mercedes-Benz Center or the
Customer Assistance Center in the U.S. at
1-800-FOR-MERCedes (1-800-367-6372)
or in Canada at 1-800-387-0100 for other
DVDs that may be available.
Change the navigation DVD
(page 107).
TIf your vehicle has been transported by a
car, train or ferry, COMAND may require
some time to find its exact position.
COMAND may issue navigation announce-
ments not suited to your actual position. Moving the vehicle a few yards is typically
enough to remedy the situation.
While determining the exact position ,
route guidance is subject to the following
restrictions:

COMAND does not output navigation
announcements.

The display
OFF
ROAD
and an arrow indi-
cating the direction of the destination
appear instead of the detailed naviga-
tion displays.
Once the system is correctly repositioned,
route guidance continues with navigation
announcements and detailed navigation
displays.
Travelling abroadRoute guidance with GPSiGPS (G
lobal P
ositioning S
ystem) sig-
nals received make it possible to deter-
mine the current vehicle position.
iDeviations from the actual position
may occur 
if the reception of GPS signals is
disturbed e. g. in parking garages
and tunnels

if road conditions are bad

depending on the vehicle’s condi-
tion
Route guidance after vehicle trans-
port
iThe navigation DVD must be loaded in
the navigation computer (
page 107).

128 Navigation*Destination entry
Press.
The Start Route Guidance menu ap-
pears.

Press.
Route calculation begins.You can store the current vehicle position
or a location selected via the map as an en-
try in the
Last
Destinations
memory. Therein
such entries are marked with
(
page 147).
If you wish to store such entries for later
retrieval or repeat usage, you can store
them in the standard destination memory
(page 148).
Storing current vehicle position

Press.

Press any soft key if the soft key dis-
plays are hidden.
The soft key displays appear.1Symbol = current vehicle location

Press the
Memory
soft key.
The system stores the current vehicle
position.
While storage takes place, the
Memory

soft key display changes its color for a
short period of time.
iRoute guidance is only possible to co-
ordinates within the digital map range.
Storing map location

129 Navigation*
Destination entry
Storing locations selected via the map
Press.

Move the map and select a location
(page 126).

Press the
Memory
soft key.
The system stores the current cursor
position.
While storage takes place, the
Memory

soft key display changes its color for a
short period of time.

130 Navigation*Route guidanceYou can start route guidance when the
destination input is complete and Start Route Guidance
is displayed at the bot-
tom of the main area.
Besides starting route guidance following
soft keys are available:

Mode
soft key
Provides access to the route mode set-
ting for certain road types to be avoid-
ed (page 111).

Save
soft key
Stores the entered destination in the
destination memory (
page 148).

To start route guidance, press .
The route is calculated and route guid-
ance begins.
Depending on the distance to the destina-
tion, route calculation can take some time.
While the route is being calculated,
Reading
Navi DVD... Please Wait
and an arrow pointing
towards the destination are displayed.
Once route calculation is complete, route
guidance begins.
Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con-
ditions at the time of DVD production. DVD
maps may not cover all areas nor all routes
within an area.
The system will calculate a new route dur-
ing active route guidance if the driver fails
to follow the route guidance.
During recalculation,
NEW RTE
is displayed.
The arrow is not solid.
Start route guidance menu
Route calculation
Route re-calculation

135 Navigation*
During route guidance

During route guidance
Using the soft keys, diverse menus or dis-
plays can be requested, and settings can
be adjusted during route guidance.
COMAND automatically hides the soft key
displays after a certain period of time.
Press any soft key while route guidance
is active
The soft key displays appear.Selectable soft keys

Info
soft key
Provides access to the Info menu
(
page 135).

Detour
soft key
Provides access to the Detour function
(
page 137).

St-over
soft-key
Provides access to the stop-over func-
tion (page 139).

Symbol
soft key
Provides access to setting the symbols
display (
page 142)

Memory
soft key
The map position is stored
(
page 128).

Display
soft key
Provides access to the Display menu
(
page 142).

soft key
The map scale will change to display a
more detailed map.

soft key
The map scale will change to display a
map that shows a wider area.

If the soft key displays are shown
(page 135), press the
Info
soft key.
The Info menu appears. This shows you
the main destination and a stopover
destination that may have been en-
tered.
Showing soft key displays
Info menu
s


163 System
System settings
Setting the time
The UTC time transmitted by the GPS sat-
ellites has to be set to the local time zone.
This enhances
correct navigation for routes with time-
dependent traffic guidance, and

correct calculation of the estimated
time of arrival.

Use or  to select the hours or
the minutes.

Press or .
Depending on the selection, hours or
minutes are set.
Setting the minutes:
With GPS reception, each time you
press  or  changes the time in in-
crements of 30 minutes. Without GPS
reception, the time is changed in 1
minute increments.
Setting the hours:
Each time you press  or , the
hours change in increments of 1 hour.

Press the
Back
soft key.
The new setting is stored.Setting the date

Use or  to select the day, the
month or the year.

Press or .
Depending on the selection, the day,
the month, or the year is set.

Press the
Back
soft key.
The new setting is stored.
Setting the date/Time format

Press the
Format
soft key.
You will see the date and time following
the currently selected format, as well
as a list of possible formats.
iThere is no automatic change from day-
light saving time to standard time.
This has to be changed manually.
When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.
iThe date can be set only if GPS recep-
tion is available.


164 SystemSystem settings
Setting the format: 
Use or  to select a format.

Press.
The appropriate format is selected.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.
The language setting changes the display
language as well as the language used for
voice instructions in navigation announce-
ments.

In the System menu (
page 162),
press the
Lang.
soft key.
The language list is displayed.The following options are available:

Instr. cluster settings
:
The system switches to the lan-
guage already set in the vehicle in-
strument cluster (
Vehicle
Operator’s manual).

All other options:
The system switches to the re-
quested language.
iList entry 1-3: Date formats
List entry 4 and 5: Time formats
(Entry 5 is not visible on the display ex-
ample below.)
Solid circle : format set
Empty circle : format not set
Setting the language