ESP MERCEDES-BENZ E-Class 2005 W211 Comand Manual

87 Telephone*
Telephone operation
Using the COMAND control unit after
PIN and unlock code entry 
Press repeatedly until the Tele-
phone main menu appears.

In succession, press the number keys
,
and
.

Press.
The telephone establishes the connec-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.
The PIN protects the telephone against un-
authorized use. Your PIN is found in the
telephone service provider's documenta-
tion.
Commit your PIN to memory.
Most telephone functions are not available
before entering the PIN.

Press the corresponding number key

-  for each digit.
In case of erroneous entry, you can de-
lete the last or more digits:
Press the
Delete
soft key as often as
required.

Once all digits have been entered,
press the
OK soft key.
Entering the PIN (only GSM) iIf a GSM cellular phone is used, a PIN
may also have to be entered.
The PIN may be entered on the cellular
phone itself (
Telephone Operation
Guide).


90 Telephone*Telephone operation
ROAMING
= telephone is logged into a cel-
lular phone network outside your home
network,

NO SERV.
= no network available,

= telephone signal strength,

= call active (
page 96).
Other messages could also appear:

If the message Please insert phone
, Phone not installed
or
Please insert SIM card
appears, see chap-
ter “Switching the phone ON / OFF”
(
page 85)

If the message Please Enter PIN:
appears, see “Entering
the PIN” (
page 87)

If the message Enter unlock code:
appears, see “Enter-
ing unlock code” (page 88)Selectable soft keys and options

soft key
Opens the phone book (
page 98),

Recvd.#
soft key
Opens the accepted and missed calls
list (page 93),

Dialed #
soft key
Opens dialed calls list (
page 94),

SMS
soft key
Provides access to the SMS menu
(page 101),

Entry of a phone number (
page 91).The ringing tone is audible in the event of
an incoming call. The call screen pops up
on the current display.
If the multifunction display in the instru-
ment cluster is set to telephone mode, the
call screen also appears in the multifunc-
tion display.
iIf a list is empty, the corresponding soft
key is without function. This is indicat-
ed by the corresponding soft key dis-
play being shaded out.
Answering an incoming call

101 Telephone*
SMS (Mail)

SMS (Mail)
SMS messages can be received if your ve-
hicle is equipped with a telephone and
SMS messaging is available from your car-
rier.
Received messages are saved in the folder
SMS inbox.
Open the Telephone main menu
(page 89).

Press the
SMS
soft key.
The folder SMS inbox appears.The SMS inbox shows the list of re-
ceived messages. The list is sorted
chronologically, the last message re-
ceived is displayed at the top of the list.
The corresponding date and time ap-
pears in the status bar when the select-
ed message has been received.

Use or  to select another mes-
sage.
iIncoming new messages are indicated
by the symbol in the status bar.
Symbol appears in the status bar if
the SMS memory is full.
In addition, a corresponding message
is displayed when the folder is opened.SMS inbox
iIf no SMS messages have been re-
ceived the
SMS
soft key is without func-
tion and therefore shaded out.


126 Navigation*Destination entry
Memory
soft key
The current map location is stored
(
page 128).

Display
soft key
You can select which POIs will appear
as symbols on the map (
page 142).

soft key
The map scale will change to display a
more detailed map.

soft key
The map scale will change to display a
map that shows a wider area. Moving the map and selecting a desti-
nation

Move the cursor using, , ,
, or  to select the desired
destination.

Release the button.
If the system finds a street name at the
location the cursor is pointing to, the
corresponding street name is shown in
the status bar.
In this example:
WATER ST
Start route guidance to the selected
destination

Press .
The Start Route Guidance menu ap-
pears if route guidance has not yet
been activated.
Press .
Route calculation begins.
If route guidance is already active, you
will be prompted to confirm that you
wish to accept the new destination.

Press to select
Yes
.

Press.
Route calculation begins.
iThe soft keys
Coord.
, Memory
and
Display

are visible only if the map has been
called up using.
iThe destination selection will be lost
when pressing the
Back
soft key.
The system reverses to the details of
the previously entered destination.

158 ServiceTele Aid*Tele Aid incorporates the following func-
tions:
Emergency call system

Roadside Assistance

Information
For certain emergency situations, the sys-
tem automatically triggers an emergency
call. An emergency call can also be trig-
gered manually. Refer to your vehicle Op-
erator's Manual for additional information.
If the system initiates an emergency call,
Connecting
appears on the display.
During the emergency call
Call Connected

appears on the display. No operation from
COMAND is possible.Mercedes-Benz Roadside Assistance will
assist if technical problems with your vehi-
cle are experienced.
Roadside Assistance can be requested
manually. Refer to your vehicle Operator's
Manual for additional information.
Upon request of Roadside Assistance the
system initiates the call to the Mercedes-
Benz Response Center.
Connecting
appears on the display.
If the connection is made, the message
Call Connected
appears on the display.
Even after ending of the connection, the
service may remain active for up to anoth-
er 5 minutes in order to transmit any re-
quired data. During this time, phone calls
cannot be made, nor can SMS messages
be received.During activation of a roadside assistance
call, it is not possible to switch to another
application.
The transmitted data can contain, e.g., text
messages or address details of a
Mercedes-Benz Center.
Cancelling text messages

Press after you have read the mes-
sage.
The message disappears.
Starting route guidance
You are prompted to confirm if route guid-
ance to the address is to be started.

Use to select the
Yes
menu item
and confirm with .
The system starts the route calcula-
tion, and subsequently the route guid-
ance to the defined address
(
page 130).
Emergency call system
Roadside Assistance

159 Service
Tele Aid*
Ending the connection
On the COMAND control unit
Press.
On the multifunction steering wheel

Presst
.
COMAND reverts to the system last ac-
tive before Tele Aid was activated.
A call to the Mercedes-Benz Response
Center will be initiated. Information re-
garding the operation of your vehicle, the
nearest authorized Mercedes-Benz Center
or Mercedes-Benz USA products and ser-
vices is available to you. Refer to your vehi-
cle Operator's Manual for additional
information. When a call to the Mercedes-Benz Re-
sponse Center is initiated,
Connecting
ap-
pears on the display.
When the connection is made, the mes-
sage
Call Connected
appears on the display.
Even after the connection has been ended,
the service will remain active for 5 minutes
in order to transmit any required data. Dur-
ing this time, phone calls can not be made,
nor can SMS messages be received.
The transmitted data can contain, e.g., text
messages or address details of a Mer-
cedes-Benz Center.Cancelling text messages

Press after you have read the mes-
sage.
The message disappears.
Starting route guidance
You are prompted to confirm if route guid-
ance to the address is to be started.

Use to select the
Yes
menu item
and confirm with .
The system starts the route calcula-
tion, and subsequently the route guid-
ance to the defined address
(
page 130).
Information

173 Glossary
Root directory
The uppermost directory on a storage
medium.
Scan rate (MP3)
Indicates the frequency at which volt-
age samples are taken during the con-
version of an analog signal into a digital
signal. The analog-to-digital converter
converts the samples into digital sig-
nals.
SCAN search
Plays receivable radio stations, or CD
tracks in succession, each for approx.
8 seconds.
SIM
(S
ubscriber I
dentity M
odule)
Card provided by the GSM telephone
service provider. Necessary for access-
ing a mobile communication network.
SMS
(S
hort M
essage S
ervice)With this function, you can receive,
read and delete short text messages
(if SMS service is provided by your ser-
vice provider).
Soft keys
Keys to activate different functions,
depending on the selected operating
mode.
Tele Aid
(Tele
matic A
larm I
dentification on D
e-
mand)
The Tele Aid system consists of three
types of response: automatic and man-
ual emergency, roadside assistance
and information. Tele Aid is initially
activated by completing a subscriber
agreement and placing an acquain-
tance call.
The Tele Aid system is operational pro-
vided the vehicle's battery is charged,
properly connected, not damaged and
cellular and GPS coverage are avail-
able.Telematics
Compound word made up of the terms
Telecommunication and Informatics.
Unlock code
Your unlock code prevents unautho-
rized persons from using your tele-
phone. The unlock code is a number
string, which you have to enter when
switching on the telephone.
UTC
(U
niversal T
ime C
oordinated)
The mean sun time associated with lon-
gitude zero (world time). It functions as
basis for the time zones.
WB
Weatherband