display MERCEDES-BENZ E-Class 2005 W211 Comand Manual

146 Navigation*During route guidance

Standard setting
option:
The scales for full-screen and split-
screen map display are always
identical. Changing the scale
(
page 133) on one map changes
the scale of the other.

Manual
option:
The scales can be different. Chang-
ing the scale on one map has no ef-
fect on the current scale of the
other map.

Use  or  to select the desired op-
tion.

Press .
Depending on the previous setting, the Standard
(identical scale) or
Manual
(indi-
vidual scale) option is activated.

Finally, press the
Back
soft key or wait
for the screen to change.
iThe solid circle shows the current
setting.

147 Navigation*
Last destinations and destination memory

Last destinations and destination memory
The
Last destinations
memory automatically
stores the last destination for which route
guidance had been started.
The current vehicle position and positions
selected via the map can also be stored as
a destination in this memory (
page 128).
Such destinations are marked with the
symbol.
Altogether amaximum of 50 destinations
can be stored.
Calling up the Last destinations memo-
ry and selecting a destination

Call up the Navigation main menu
(page 110).

Use to select the
Last
destinations

menu item.

Press .
The list of last destinations is dis-
played. The most recently stored desti-
nation is at the top of the list.

Use or  to select a destination.
The
Page
soft keys allow scrolling
through the list page by page.Selectable soft keys and options

Save
soft key
Stores the selected destination in the
standard destination memory
(
page 148).

Details
soft key
Displays details on the selected desti-
nation (if available).

Delete
soft key
Allows to delete the selected destina-
tion (page 148).
Starting route guidance to a destina-
tion of the Last destination memory

Select a destination.

Press .
The full destination appears.
Last destinations memory


148 Navigation*Last destinations and destination memory
Press if you want to start route
guidance, otherwise press the
Back
soft
key.
Deleting a destination from the last
destinations memory

Select a destination (
page 147)

Press the
Delete
soft key.
You are prompted to confirm whether
or not the destination is to be deleted.

Use  to select the menu item
Yes
.

Press .
The destination is deleted.
Calling up the destination memory and
selecting a destination


Call up the Navigation main menu
(page 110).

Use  or  to select the
Destination
memory
menu item.

Press .
The destination memory appears. This
is indicated by
Destination memory
in the
status bar.

Use, , , or  to select the
desired entry.
Selectable soft keys and options

Details
soft key
Displays details on the selected desti-
nation (if available).

Delete
soft key
Allows to delete the selected destina-
tion (page 149).
Destination memory

149 Navigation*
Last destinations and destination memory
Starting route guidance to a destina-
tion stored in the destination memory 
Select a destination.

Press .
The Start Route Guidance menu ap-
pears.

Press if you want to start route
guidance, otherwise press the
Back
soft
key.
Deleting a destination from the destina-
tion memory

Select a destination (
page 148).

Press the
Delete
soft key.
A delete entry prompt appears.

Use  to select the menu item
Yes
.

Press .
The system deletes the entry from the
destination memory.Storing a destination

In the Start Route Guidance menu
(page 130), press the
Save
soft key;
or

Select a destination from the
Last

destinations
memory (
page 147) and
press the
Save
soft key.
The system automatically shows a de-
fault name (the city if applicable) as
Destination name; however a different
name can be entered.
Storing under the default name

Press and hold  for approx. 2 sec-
onds;
or

Use or  to select the sym-
bol and press .
The system will store the address un-
der the default name.Storing under a different name

Press the
Delete
soft key to delete the
default name.
Upper and lower case characters, accent-
ed characters, special characters and
numbers can be entered.
To select lower or upper case or to select
special characters, the following shift sym-
bols on the display are available:

= upper case

= lower case

= special characters
ok
iThe name must have at least one char-
acter.iSymbol “ ” represents a space. ABCabc...


152 Navigation*POIs (Points of Interest)POIs main menu
Selection of one of the following menu
items is possible:
Current positionSelecting a POI in the local area
(page 152).

Select citySelecting a POI in any city to be
selected(
page 153).

Global destinationsA POI from global categories can be se-
lected (
page 153). The selection is
restricted to the region entered last;
however, the region selection can be
changed.

In the POIs main menu, (
page 152)
select the
Current position
menu item.

Press .
A list of POI categories appears for the
selection of a category.Selecting a POI category

Useor  to select a category.
The
Page
soft keys allow scrolling
through the list page by page.

Press .
If you have selected the Restaurant
category, another list will be displayed
from which you can select a sub-cate-
gory, e.g. Chinese food.
If you have selected any other catego-
ry, this will take you straight to the list
of POIs.
Selecting POI in the local area of the
current position

155 Navigation*
POIs (Points of Interest)
The details disappear after approx.
3 seconds, or when pressing the
Details

soft key again.

Press .
The Start Route Guidance menu ap-
pears.

Press to start route guidance.

Press 
or

In the Destination entry menu
(page 117), press the
Map
soft key.
The full-screen map appears. Symbols
indicate the POIs.

If required, use, , , , ,
or  to move the map.

If the soft key displays are hidden,
press any soft key.
The soft key displays appear.
.
Press the
Symbol
soft key.
A POI is selected and highlighted in col-
or. Its name appears in the status bar.
Selecting a POI using the mapiThe POI symbols to be displayed can be
selected (
page 142).
Symbols are indicated only if the map
scale is set to 0.05 mi (50 m), 0.1 mi
(100 m), 0.2 mi (200 m), or 0.5 mi
(500 m).
To change the map scale (
page 133).


158 ServiceTele Aid*Tele Aid incorporates the following func-
tions:
Emergency call system

Roadside Assistance

Information
For certain emergency situations, the sys-
tem automatically triggers an emergency
call. An emergency call can also be trig-
gered manually. Refer to your vehicle Op-
erator's Manual for additional information.
If the system initiates an emergency call,
Connecting
appears on the display.
During the emergency call
Call Connected

appears on the display. No operation from
COMAND is possible.Mercedes-Benz Roadside Assistance will
assist if technical problems with your vehi-
cle are experienced.
Roadside Assistance can be requested
manually. Refer to your vehicle Operator's
Manual for additional information.
Upon request of Roadside Assistance the
system initiates the call to the Mercedes-
Benz Response Center.
Connecting
appears on the display.
If the connection is made, the message
Call Connected
appears on the display.
Even after ending of the connection, the
service may remain active for up to anoth-
er 5 minutes in order to transmit any re-
quired data. During this time, phone calls
cannot be made, nor can SMS messages
be received.During activation of a roadside assistance
call, it is not possible to switch to another
application.
The transmitted data can contain, e.g., text
messages or address details of a
Mercedes-Benz Center.
Cancelling text messages

Press after you have read the mes-
sage.
The message disappears.
Starting route guidance
You are prompted to confirm if route guid-
ance to the address is to be started.

Use to select the
Yes
menu item
and confirm with .
The system starts the route calcula-
tion, and subsequently the route guid-
ance to the defined address
(
page 130).
Emergency call system
Roadside Assistance

159 Service
Tele Aid*
Ending the connection
On the COMAND control unit
Press.
On the multifunction steering wheel

Presst
.
COMAND reverts to the system last ac-
tive before Tele Aid was activated.
A call to the Mercedes-Benz Response
Center will be initiated. Information re-
garding the operation of your vehicle, the
nearest authorized Mercedes-Benz Center
or Mercedes-Benz USA products and ser-
vices is available to you. Refer to your vehi-
cle Operator's Manual for additional
information. When a call to the Mercedes-Benz Re-
sponse Center is initiated,
Connecting
ap-
pears on the display.
When the connection is made, the mes-
sage
Call Connected
appears on the display.
Even after the connection has been ended,
the service will remain active for 5 minutes
in order to transmit any required data. Dur-
ing this time, phone calls can not be made,
nor can SMS messages be received.
The transmitted data can contain, e.g., text
messages or address details of a Mer-
cedes-Benz Center.Cancelling text messages

Press after you have read the mes-
sage.
The message disappears.
Starting route guidance
You are prompted to confirm if route guid-
ance to the address is to be started.

Use to select the
Yes
menu item
and confirm with .
The system starts the route calcula-
tion, and subsequently the route guid-
ance to the defined address
(
page 130).
Information

162 SystemSystem settings
Press.
The System menu appears.
Selectable soft keys

Time
soft key
For setting the date and time.

Lang.
soft key
For setting the language (
page 164).

Tones
soft key
For switching confirmation beeps
and acoustic signals ON and OFF
(
page 165).

Display
soft key
For changing the display settings
(
page 165).

VC tips
soft key
To call up the Voice control settings*
(
page 166).

Reset
soft key
For reversing COMAND to the factory
settings (
page 169).

In the System menu, press the
Time
soft
key.
The Date/Time settings menu appears.
The following options are now available:

Setting the time

Setting the date

Setting the date/time format
Calling up the System menu
Setting the date/time

164 SystemSystem settings
Setting the format: 
Use or  to select a format.

Press.
The appropriate format is selected.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.
The language setting changes the display
language as well as the language used for
voice instructions in navigation announce-
ments.

In the System menu (
page 162),
press the
Lang.
soft key.
The language list is displayed.The following options are available:

Instr. cluster settings
:
The system switches to the lan-
guage already set in the vehicle in-
strument cluster (
Vehicle
Operator’s manual).

All other options:
The system switches to the re-
quested language.
iList entry 1-3: Date formats
List entry 4 and 5: Time formats
(Entry 5 is not visible on the display ex-
ample below.)
Solid circle : format set
Empty circle : format not set
Setting the language