Time MERCEDES-BENZ E-Class 2006 W211 Comand Manual

135 Navigation*
During route guidance

During route guidance
Using the soft keys, diverse menus or dis-
plays can be requested, and settings can
be adjusted during route guidance.
COMAND automatically hides the soft key
displays after a certain period of time.
Press any soft key while route guidance
is active
The soft key displays appear.Selectable soft keys
Info soft key
Provides access to the Info menu
(
page 135).
Detour soft key
Provides access to the Detour function
(
page 137).
St-over soft-key
Provides access to the stop-over func-
tion (
page 139).
Symbol soft key
Provides access to setting the symbols
display (
page 142)
Memory soft key
The map position is stored
(
page 128).
Display soft key
Provides access to the Display menu
(
page 142).
 soft key
The map scale will change to display a
more detailed map.
 soft key
The map scale will change to display a
map that shows a wider area.
If the soft key displays are shown
(
page 135), press the Info soft key.
The Info menu appears. This shows you
the main destination and a stopover
destination that may have been en-
tered.
Showing soft key displays
Info menu
s


136 Navigation*
During route guidance
1Estimated time of arrival
2Remaining driving time in hours and
minutes
3Remaining journey (distance)
Points 1, 2 and 3 refer to the stop-
over destination. You'll only see the de-
tails for the final destination when you
arrive at your stopover and the system
has calculated the route to the main
destination.Selectable soft keys:Route soft key
Provides access to the display of the
route on the map (
page 136).
Mode soft key
Provides access to the route mode set-
ting for certain road types to be avoid-
ed (
page 111).
In the Info menu (page 135), press
the
Route soft key.The map appears. The route remaining
is highlighted in blue color.
The destination is marked with a flag
, any stop-over destination is marked
with a flag . The current vehicle posi-
tion is identified with the symbol.
Depending on the distance to the des-
tination, it may take some time before
the route display appears.
i
The estimated time of arrival does not
refer to the time zone of destination,
but always refers to the time zone of
the vehicle's current location. For a
correct calculation, make sure that the
system clock is set correctly
(
page 162).
Displaying the route on the map
s

158 Service
Tele Aid*
Tele Aid incorporates the following func-
tions:
Emergency call system
Roadside Assistance
Information
For certain emergency situations, the sys-
tem automatically triggers an emergency
call. An emergency call can also be trig-
gered manually. Refer to your vehicle Op-
erator's Manual for additional information.
If the system initiates an emergency call,
Connecting appears on the display.
During the emergency call
Call Connected
appears on the display. No operation from
COMAND is possible.Mercedes-Benz Roadside Assistance will
assist if technical problems with your vehi-
cle are experienced.
Roadside Assistance can be requested
manually. Refer to your vehicle Operator's
Manual for additional information.
Upon request of Roadside Assistance the
system initiates the call to the Mercedes-
Benz Response Center.
Connecting appears on the display.
If the connection is made, the message
Call Connected appears on the display.
Even after ending of the connection, the
service may remain active for up to anoth-
er 5 minutes in order to transmit any re-
quired data. During this time, phone calls
cannot be made, nor can SMS messages
be received.During activation of a roadside assistance
call, it is not possible to switch to another
application.
The transmitted data can contain, e.g., text
messages or address details of a
Mercedes-Benz Center.
Cancelling text messages
Press after you have read the mes-
sage.
The message disappears.
Starting route guidance
You are prompted to confirm if route guid-
ance to the address is to be started.
Use to select the Yes menu item
and confirm with .
The system starts the route calcula-
tion, and subsequently the route guid-
ance to the defined address
(
page 130).
Emergency call system
Roadside Assistance

159 Service
Tele Aid*
Ending the connection
On the COMAND control unit
Press.
On the multifunction steering wheel
Presst .
COMAND reverts to the system last ac-
tive before Tele Aid was activated.
A call to the Mercedes-Benz Response
Center will be initiated. Information re-
garding the operation of your vehicle, the
nearest authorized Mercedes-Benz Center
or Mercedes-Benz USA products and ser-
vices is available to you. Refer to your vehi-
cle Operator's Manual for additional
information. When a call to the Mercedes-Benz Re-
sponse Center is initiated,
Connecting ap-
pears on the display.
When the connection is made, the mes-
sage
Call Connected appears on the display.
Even after the connection has been ended,
the service will remain active for 5 minutes
in order to transmit any required data. Dur-
ing this time, phone calls can not be made,
nor can SMS messages be received.
The transmitted data can contain, e.g., text
messages or address details of a Mer-
cedes-Benz Center.Cancelling text messages
Press after you have read the mes-
sage.
The message disappears.
Starting route guidance
You are prompted to confirm if route guid-
ance to the address is to be started.
Use to select the Yes menu item
and confirm with .
The system starts the route calcula-
tion, and subsequently the route guid-
ance to the defined address
(
page 130).
Information

162 System
System settings
Press.
The System menu appears.
Selectable soft keys
Time soft key
For setting the date and time.
Lang. soft key
For setting the language (
page 164).
Tones soft key
For switching confirmation beeps
and acoustic signals ON and OFF
(
page 165).
Display soft key
For changing the display settings
(
page 165).
VC tips soft key
To call up the Voice control settings*
(
page 166).
Reset soft key
For reversing COMAND to the factory
settings (
page 169).
In the System menu, press the Time soft
key.
The Date/Time settings menu appears.
The following options are now available:
Setting the time
Setting the date
Setting the date/time format
Calling up the System menuSetting the date/time

163 System
System settings
Setting the time
The UTC time transmitted by the GPS sat-
ellites has to be set to the local time zone.
This enhances
correct navigation for routes with time-
dependent traffic guidance, and
correct calculation of the estimated
time of arrival.
Use or  to select the hours or
the minutes.
Press or .
Depending on the selection, hours or
minutes are set.
Setting the minutes:
With GPS reception, each time you
press  or  changes the time in in-
crements of 30 minutes. Without GPS
reception, the time is changed in 1
minute increments.
Setting the hours:
Each time you press  or , the
hours change in increments of 1 hour.
Press the Back soft key.
The new setting is stored.Setting the date
Use or  to select the day, the
month or the year.
Press or .
Depending on the selection, the day,
the month, or the year is set.
Press the Back soft key.
The new setting is stored.
Setting the date/Time format
Press the Format soft key.
You will see the date and time following
the currently selected format, as well
as a list of possible formats.
i
There is no automatic change from day-
light saving time to standard time.
This has to be changed manually.
When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.
i
The date can be set only if GPS recep-
tion is available.


164 System
System settings
Setting the format:
Use or  to select a format.
Press.
The appropriate format is selected.
Press the Back soft key or wait for the
screen to change.
The new setting is stored.
The language setting changes the display
language as well as the language used for
voice instructions in navigation announce-
ments.
In the System menu (page 162),
press the
Lang. soft key.
The language list is displayed.The following options are available:
Instr. cluster settings:
The system switches to the lan-
guage already set in the vehicle in-
strument cluster (
Vehicle
Operator’s manual).
All other options:
The system switches to the re-
quested language.
i
List entry 1-3: Date formats
List entry 4 and 5: Time formats
(Entry 5 is not visible on the display ex-
ample below.)
Solid circle : format set
Empty circle : format not set
Setting the language

166 System
System settings
Switching the display dimming
characteristics
You can select from 3 display dimming
modes:
Day mode
The display is constantly set to daytime
design.
Night mode
The display is constantly set to night-
time design.
Automatic
The display will change depending on
the illumination of the instrument clus-
ter.
Use or  to select an entry.
Press.Adjusting display brightness
Press the Bright. soft key.
The Brightness display appears.
Press or .
The brightness changes accordingly.
Press the Back soft key or wait for
screen to change.
The new setting is stored.Use this function to:
Start or delete voice control individual-
ization (
page 167)
Activate/deactivate the voice control
help window
Activate/deactivate the help window
Open the System menu (page 162).
Press the VC tips soft key.
The Voice control menu appears.
Voice control settings*

169 System
System settings
Canceling individualization
You can cancel individualization at any
time during either the first or second
stage. All existing data remains un-
changed.
During any individualization stage,
press the
Cancel soft key.
Individualization is cancelled.
Deleting individualization
From the Individualization menu,
press to select menu item
Delete
individualization
.
Press.
A prompt appears, which asks if you re-
ally want to delete the data.
Press to select Yes.
Press.
The individualization is deleted.Actuating the Reset function resets
COMAND to the factory settings.
In addition, it deletes:
SMS: All SMS messages.
Navigation*: All entries in the Destina-
tion memory and in the Last destina-
tion memory.
Reset activation
Call up the System menu (page 162).
Press the Reset soft key.
i
This function is not available if no indi-
vidualization data has been saved.
Reset function


171 Glossary
Autostore
Enters the stations with the best recep-
tion (signal strength) into the autostore
memory in order of their reception
quality (from strong to weak).
Balance
Volume adjustment between left and
right speakers.
Bit
(Bi
nary digit)
The smallest unit of digital information.
Bit rate
Measurement of transmission speed.
Indicates the number of ->bits trans-
mitted per time unit.
CD
(C
ompact Disc)
Digital storage medium in disc form.
CD-R
(CD
Recordable)
->CD which can be read and written but
not deleted.CD-RW
(CD
Rewriteable)
->CD which can be read, written and
deleted.
COMAND
(Co
ckpit Management and Data Sys-
tem)
Information and operating center for
vehicle sound and communication sys-
tems, including the radio and CD play-
er, as well as for other optional
equipment (CD changer*, telephone*,
satellite radio*, navigation*).
Coordinates
Indicate the geographical position on
the earth's surface.
DVD
(D
igital Versatile Disc)
Digital storage medium in disc form for
storing large volumes of data.Fader
(Fader control)
Volume control between front and rear
speakers.
Folder
Alternative designation for directories.
Data saved on a storage medium can
be organized into directories for im-
proved clarity. Can be likened to a filing
cabinet containing a number of folders,
each of which holds a number of docu-
ments.
Greenwich meridian
A specific north-south line running
through Greenwich, England.
GPS
(G
lobal Positioning System)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs DVD digital maps for
navigation.
Glossary