change position MERCEDES-BENZ E CLASS 2019 User Guide

You canstopthevehicle andchangethetransmission position duringthe parking pro‐cedure. The systemthen calculates a newvehicle path. The parking procedure canthen be continued. If no newvehicle path isavailable,the transmission position will bechanged again. Ifthevehicle has notyetreachedthe parking space,the parking pro‐cedure will be canceled, should agear bechanged.
Exiting a parking space withActiveParkingAssist
Requirements:RThevehicle has been parked withActiveParking Assist.
Depending onthevehicle's equipment,thebutton may also be located at a differentposition inthe center console.
Please notethatyou areresponsibleforthevehi‐cle and surroundings duringthe entire parkingprocedure.
Startthevehicle.
Press button1.TheActiveParking Assist view appears onthe multimedia system display.
Ifthevehicle has been parked atright anglestothe direction of travel: in area2, selectdirection of travel3.
Thevehicle path shown onthe multimediasystem display may differ fromthe actualvehicle path.
Confirm direction ofexit3todrive out ofthe parking space.
The turn signal indicator is switched on auto‐matically whentheexitthe parking spaceprocedure begins.
206Driving and parking

You areresponsiblefor selectingthe turn signalin accordance withthe traffic conditions. If nec‐essary,selectthe turn signal accordingly.
\nWARNINGRisk of accident duetovehi‐cle swinging out while parking or pullingout of a parking space
While parking orexiting a parking space,thevehicle swings out and can drive onto areasofthe oncoming lane.
This could causeyoutocollide withobjectsorotherroad users.
Pay attentiontoobjects andotherroadusers.
Where necessary,stopthevehicle orcancelthe parking procedure withActiveParking Assist.
If,forexample,thePlease Engage ForwardGearmessage appears inthe multimedia sys‐
tem display: selectthe corresponding trans‐mission position.Thevehicle moves out ofthe parking space.The turn signal indicator is switched off auto‐matically.
Example:vehicles with 360° Camera
Aftertheexiting procedure has been completed,theParking Assist Finished, Take Control ofVehiclemessage appears inthe display ofthemultimedia system. Awarningtone and display4inthe display ofthe multimedia systempromptyoutotakeover control ofthevehicle.You havetoaccelerate, brake,steer andchangegearyourself again.
Function of DriveAway AssistDriveAwayAssistcanreducethe severity of animpact when pullingaway. If an obstacle isdetected inthe direction of travel,thevehicle'sspeed is brieflyreducedtoapprox. 1mph(2 km/h). If a critical situation is detected,the

Selecting notificationsMultimedia system:
NavigationZOptionsAnnounce-
ments
Switch an announcement onsor offS.
You canchoose fromthefollowing announce‐ments:
RAnnounce Traffic Warnings
This function is notavailable in all countries.
RAnnounce Street Names
The multimedia system announcesthenames oftheroadsthat willfollowtheupcomingchange of direction.
This function is notavailable in all countriesand languages.
Displaying destination information
Requirements:RA destination is entered.
Multimedia system:
Navigation
SelectWay Points and Info.
Thefollowing information is displayed:
RIntermediate destinations and destination
Theroute can also include uptofourintermediate destinations.
RName, address
RRemaining driving distance
RTime of arrival
Selecting an alternativerouteMultimedia system:
NavigationÀRoute and Position
SelectAlternative Route.Theroutes are displayed in accordance withthe setting made intheroute settings.
The currently selectedroute is shown with adark blue line.
Selectthe alternativeroute.
Activating a commuterroute
Requirements:RYour home andworkaddresses are saved asdestinations inthefavorites (→page 286).
Multimedia system:
NavigationÀRoute and Position
SelectActivate Commuter Routes.Navigation automaticallyrecognizesthatthevehicle is located ontheroute between"home" and "work" or viceversa. It automati‐callystarts aroute guidance withoutvoiceoutput.
Ifthe destinationsfor home andworkhavenotyet been created, a promptappears.
Forthe daily commuterroute, traffic inci‐dents ontheroute are alsoreported whendriving withoutroute guidance.
280Multimedia system

The map appears in full-screen mode.
RAnnouncement phase
The multimedia system announcestheupcomingchange of direction, e.g.byannouncing "Turnright in 300ft(100 m)".
The display is split into two parts. The map isdisplayed onthe left;ontheright,there is adetailed image ofthe intersection or a 3Dimage ofthe upcomingchange of direction.
RChange-of-direction phase
The multimedia system announcesthe immi‐nentchange of direction, e.g.byannouncing"Nowturnright".
The display is split into two parts.
Thevehicle has successfullychanged direc‐tion whenthe light-color bar ontherightdrops downto0feet(0 m) andthe currentvehicle position symbol hasreachedthehighlightedchange-of-direction point.
Whenthechange of direction is complete,the map appears in full-screen mode.
Changes of direction are also shown intheInstrument Display.
LanerecommendationsoverviewThis display appearsfor multi-laneroads.
Ifthe digital map containstherelevant data,themultimedia system can display lanerecommen‐dationsforthe next twochanges of direction.
1Recommended lane
2Possible lane
3Lanes notrecommended
Thefollowing lanes are displayed:
RRecommended lane1
Inthis lane,you will be abletocomplete boththe nextchange of direction andthe oneafterthat.
RPossible lane2
Inthis lane,you will onlybe abletocompletethe nextchange of direction.
RLane notrecommended3
Inthis lane,you will not be abletocompletethe nextchange of direction withoutchang‐ing lane.
Duringthechange of direction, new lanes maybe added.
Lanerecommendations can also be dis‐played inthe Instrument Display and intheHead-up Display.
Overview of destinationreachedOncethe destination isreached,you will seetheÍcheckeredflag.Route guidance isfinished.
When an intermediatedestination has beenreached,you will seethe intermediate destina‐
Multimedia system283

Rfrequent operation in mountainousterrain oron poorroad surfaces
Rwhenthe engine is often leftidlingfor longperiods
Roperation in particularly dusty conditionsand/or if air-recirculation mode is frequentlyused
Inthese or similar operating conditions, havetheinterior airfilter, engine air cleaner, engine oiland oilfilteretc.changed more frequently. Thetires must bechecked more frequently ifthevehicle is operated under increased loads.Fur‐ther information can be obtained at aqualifiedspecialistworkshop.
Battery disconnection periods
The ASSYST PLUS service interval displaycan only calculatethe service due datewhenthe batteryis connected.
Notedownthe service due date displayed onthe instrument display before disconnectingthe battery (→page 347).
Engine compartment
Active hood (pedestrian protection)
Operation ofthe active hood (pedestrian pro‐tection)In certain accident situations,therisk of injurytopedestrians can bereducedbythe actuationofthe active hood. Therear area ofthe hood israisedbyapproximately 3 in (85 mm).
Forthe drivetotheworkshop,resetthe trig‐gered active hoodyourself. Afterthe active hoodhas been triggered, pedestrian protection maybe limited.
Aqualified specialistworkshop mustre-instatethe full functionality ofthe active hood.
The active hood is notavailable in all countries.
Resettingthe active hood
\nWARNINGRisk of burns from hot com‐ponent parts inthe engine compartment
Certain components inthe engine compart‐ment can beveryhot, e.g.the engine,theradiator and parts oftheexhaust system.
Allowthe enginetocool down and onlytouch component parts described inthefollowing.
Withyour handflat, push down active hood1inthe area aroundthe hinges on bothsides (arrows).The hood must engage in position.
Ifthe active hood can beraised slightly attherear inthe area ofthe hinges,repeatthestep until it engages correctly.
348Maintenance and care

Setting upthefoldingchock
Preparingthevehiclefor a wheelchange
Requirements:RTherequired tire-changetool isavailable. Ifyourvehicle is not equipped withthe tire-changetool kit, consult aqualified specialistworkshoptofind out about suitabletools.
RThevehicle is not on a slope.
RThevehicle is on solid, non-slippery and levelground.
Applythe electric parking brake manually.
Movethe front wheelstothestraight-aheadposition.
Vehicles with automatic transmission:Shift into position].
Vehicles with level control system:Setthenormalvehicle level (→page192).
Switch offthe engine.
Make surethatthe engine cannotbestarted.
Placechocksorother suitable items underthe front andrear ofthe wheelthat is diago‐nally oppositethe wheelyou wishtochange.
Removethe hub caps if necessary(→page 409).
Raisethevehicle (→page410).
Removing and installing hub caps
Requirements:RThevehicle is preparedfor a wheelchange(→page 409).
Plastic hub cap
Toremove:turnthe center cover ofthe hubcap counter-clockwise andremovethe hubcap.
Toinstall:make surethatthe center cover ofthe hub cap is turned counter-clockwise.
Positionthe hub cap and turnthe centercover clockwise untilthe hub cap engagesphysically and audibly.
Wheels and tires409

Aluminum hub cap
Toremove:position socket2on hub cap1.
The socket can befound inthe tire-changetool kit.
Position wheel wrench3on socket2.
Using wheel wrench3, turn hub cap1counter-clockwise andremoveit.
Toinstall:position hub cap1and turn untilit is completelyflush withthe wheel.
Position socket2on hub cap1.
Attachwheel wrench3tosocket2andtightenthe hub cap clockwise.Specified tighteningtorque:18lb-ft(25 Nm).
Raisingthevehicle whenchanging a wheel
Requirements:RThere are no persons inthevehicle.
RThevehicle has been preparedfor a wheelchange (→page 409).
RThe hub caps havebeenremoved(→page 409).
Important notes on usingthe jack:
RUse onlythevehicle-specific jackthat hasbeentested and approvedbyMercedes-Benztoraisethevehicle.
RThe jack is only designedforraising andholdingthevehiclefor a short time while awheel is beingchanged and notfor mainte‐nanceworkunderthevehicle.
RThe jack must be placed on afirm,flat andnon-slip surface. If necessary,use a large,flat, load-bearing, non-slip underlay.
RThefootofthe jack must be positionedverti‐cally underthe jack support point.
Rules of conduct whenthevehicle israised:
RNever placeyour hands orfeetunderthevehicle.
RNever lie underthevehicle.
RDo notstartthe engine and do notreleasethe electric parking brake.
RDo not open or close any doors orthe trunklid.
41 0Wheels and tires

Usingthe lug wrench, loosenthe wheel boltsonthe wheelyou wishtochangebyaboutone full turn. Do not unscrewthe bolts com‐pletely.
Position of jack support points
\nWARNINGRisk of injuryfrom incorrectpositioning ofthe jack
Ifyou do not positionthe jack correctly atthe appropriate jacking point ofthevehicle,the jack could tip withthevehicleraised.
Only positionthe jack atthe appropri‐ate jacking point ofthevehicle. Thebase ofthe jack must be positionedver‐tically underthe jacking point ofthevehicle.
NOTEVehicle damage fromthe jack
Ifyou do not positionthe jack correctly atthe appropriate jack support point ofthevehicle,the jack could tipover withthevehi‐cleraised.
The jack is designedexclusivelyforjacking upthevehicle atthe jack sup‐port points.
Taketheratchet out ofthe tire-changetoolkit and place it onthe hexagon nut ofthejack sothatthe letters "AUF" are visible.
Wheels and tires411

Display messagesPossible causes/consequences andPPSolutions
Apply Brake to Shift from'P'
Depressthe brake pedal.
Service Required Do NotShift Gears Visit Dealer
*The transmission is malfunctioning. The transmission position can no longer be shifted.
Whenthe transmission is in position[, consult aqualified specialistworkshop and do notchangethe trans‐mission position.
For allother transmission positions, parkthevehicle safely.
Consult aqualified specialistworkshop or breakdown service.
Reversing Not PossibleService Required
*The transmission is malfunctioning.Reversegear can no longer be engaged.
Visit aqualified specialistworkshop.
Only Shift to 'P' when Vehi-cle is Stationary
*The transmission can only be shiftedtoposition]whenthevehicle isstationary.
Driver's Door Open &Transmission Not in P Riskof Vehicle Rolling Away
*The driver's door is not fully closed andthe transmission is in position^,\\or[.
Shiftthe transmissiontoposition]whenyou parkthevehicle.
To Engage Transmiss. Posi-tion R First Depress theBrake
*You havetriedtoswitchtotransmission position^.
Depressthe brake pedal.
Shiftthe transmissiontoposition^.
Auxiliary Battery Malfunc-tion
*The auxiliarybatteryforthe transmission is no longer beingcharged.
Visit aqualified specialistworkshop.
Display messages andwarning/indicator lamps459

Drive positionInserting ..............................................151
Drive program display.............................14 9
Drive programsseeDYNAMIC SELECT
Driver's seatsee Seat
Driving lightsseeAutomatic driving lights
Driving safety system.............................165ABS (Anti-lock Braking System) ...........16 6Active Brake Assist..............................17 0BAS (Brake AssistSystem) ..................16 6EBD (electronic brakeforce distribu‐tion) .....................................................17 0
ESP®Crosswind Assist........................17 0Overview .............................................16 6Radar sensors ......................................16 5Responsibility ......................................16 5STEER CONTROL .................................17 0
Driving systemDYNAMICBODYCONTROL ..................19 0
Driving systemsee 360° CameraseeActive Blind Spot AssistseeActive Distance AssistDISTRONICseeActive EmergencyStop AssistseeActive Lane Change AssistseeActive LaneKeeping AssistseeActiveParking AssistseeActive Speed Limit AssistseeActiveSteering Assistsee AIRBODYCONTROLseeATTENTION ASSISTsee Blind Spot Assistsee Cruise controlsee Driving safety systemsee HOLD functionseeParking AssistPARKTRONICseeRear view cameraseeTraffic Sign Assist
Driving tipsDrinking and driving ............................14 2General driving tips .............................142Notes on breaking-in a newvehicle .....141
Drowsiness detectionseeATTENTION ASSIST
DYNAMICBODYCONTROLSuspension ..........................................19 0
Dynamic handling control system
see ESP®(ElectronicStability Program)
DYNAMIC SELECT....................................14 8Configuring drive program I .................14 9Displaying engine data ........................14 9Displayingvehicle data ........................14 9Drive program display ..........................149Drive programs ....................................148Function ..............................................14 8Operating (DYNAMIC SELECT switch).............................................................149Selectingthe drive program ................149Showing operationfeedback ...............14 9
E
E10............................................................ 420
Easy entryfeatureFunction/notes ...................................100Setting .................................................101
EasyexitfeatureFunction/notes ...................................100Setting .................................................101
500Index