clock MERCEDES-BENZ E CLASS 2019 User Guide

Turnclips2on cover1counter-clockwiseaquarter-turn.
Pull cover1upwards inthe direction ofthearrow.
Removeanyexisting moisture fromthe fusebox using a dry cloth.
Loosen screws4,removefuse box lid3fromthetop.
Closing
Check whetherthe seal is positioned cor‐rectly in lid3.
Insert lid3intothe bracket attherear ofthe fuse box.
Fold down lid3ofthe fuse box and tightenscrews4.
Insert cover1on bothsides.
Turnclips2on cover1clockwise aquar‐ter-turn.
Closethe hood.
Opening and closingthe fuse box inthecockpit
The fuse box is onthe side ofthe dashboardunder a cover.
Contact an authorized Mercedes-Benz Cen‐terfor further information.
Opening and closingthe fuse box inthe frontpassengerfootwell
Observethe notes on electrical fuses(→page 380).
382Breakdown assistance

Setting upthefoldingchock
Preparingthevehiclefor a wheelchange
Requirements:RTherequired tire-changetool isavailable. Ifyourvehicle is not equipped withthe tire-changetool kit, consult aqualified specialistworkshoptofind out about suitabletools.
RThevehicle is not on a slope.
RThevehicle is on solid, non-slippery and levelground.
Applythe electric parking brake manually.
Movethe front wheelstothestraight-aheadposition.
Vehicles with automatic transmission:Shift into position].
Vehicles with level control system:Setthenormalvehicle level (→page192).
Switch offthe engine.
Make surethatthe engine cannotbestarted.
Placechocksorother suitable items underthe front andrear ofthe wheelthat is diago‐nally oppositethe wheelyou wishtochange.
Removethe hub caps if necessary(→page 409).
Raisethevehicle (→page410).
Removing and installing hub caps
Requirements:RThevehicle is preparedfor a wheelchange(→page 409).
Plastic hub cap
Toremove:turnthe center cover ofthe hubcap counter-clockwise andremovethe hubcap.
Toinstall:make surethatthe center cover ofthe hub cap is turned counter-clockwise.
Positionthe hub cap and turnthe centercover clockwise untilthe hub cap engagesphysically and audibly.
Wheels and tires409

Aluminum hub cap
Toremove:position socket2on hub cap1.
The socket can befound inthe tire-changetool kit.
Position wheel wrench3on socket2.
Using wheel wrench3, turn hub cap1counter-clockwise andremoveit.
Toinstall:position hub cap1and turn untilit is completelyflush withthe wheel.
Position socket2on hub cap1.
Attachwheel wrench3tosocket2andtightenthe hub cap clockwise.Specified tighteningtorque:18lb-ft(25 Nm).
Raisingthevehicle whenchanging a wheel
Requirements:RThere are no persons inthevehicle.
RThevehicle has been preparedfor a wheelchange (→page 409).
RThe hub caps havebeenremoved(→page 409).
Important notes on usingthe jack:
RUse onlythevehicle-specific jackthat hasbeentested and approvedbyMercedes-Benztoraisethevehicle.
RThe jack is only designedforraising andholdingthevehiclefor a short time while awheel is beingchanged and notfor mainte‐nanceworkunderthevehicle.
RThe jack must be placed on afirm,flat andnon-slip surface. If necessary,use a large,flat, load-bearing, non-slip underlay.
RThefootofthe jack must be positionedverti‐cally underthe jack support point.
Rules of conduct whenthevehicle israised:
RNever placeyour hands orfeetunderthevehicle.
RNever lie underthevehicle.
RDo notstartthe engine and do notreleasethe electric parking brake.
RDo not open or close any doors orthe trunklid.
41 0Wheels and tires

Position jack2at jack support point1.
Turnratchet3clockwise until jack2sitscompletelyon jack support point1andthebase ofthe jack liesevenly onthe ground.
Turnratchet3untilthe tire israised a maxi‐mum of1.2 in (3 cm) fromthe ground.
Loosen andremovethe wheel (→page412).
Removing a wheel
Requirements:RThevehicle israised (→page410).
Mercedes-AMGvehicles:observethe notes inthe Supplement. Otherwise,you may notrecog‐nize dangers.
Whenchanging a wheel,avoid applying anyforcetothe brake discs, sincethis could impairthelevel of comfortwhen braking.
NOTEDamagetothreading from dirt onwheel bolts
Do not place wheel bolts in sand or ona dirty surface.
Unscrewthe uppermost wheel bolt com‐pletely.
Screwalignment bolt1instead ofthewheel bolt intothethreading.
Unscrewtheremaining wheel bolts fully.
Removethe wheel.
Installthe new wheel (→page412).
Mounting a new wheel
Requirements:RThe wheel isremoved (→page412).
Mercedes-AMGvehicles:observethe notes inthe Supplement. Otherwise,you may notrecog‐nize dangers.
412Wheels and tires

\nWARNINGRisk of accident from losing awheel
Oiled, greased or damaged wheel bolt/wheelnutthreads or wheel hub/wheel mountingboltthreads can causethe wheel bolts/wheel nutstocome loose.
As aresult,you could lose a wheel while driv‐ing.
Never oil or greasethethreads.
Intheevent of damagetothethreads,contact aqualified specialistworkshopimmediately.
Havethe damaged wheel bolts or dam‐aged hubthreadsreplaced.
Do not continue driving.
Observethe information onthechoice oftires (→page 405).
For tires with a specified direction ofrotation, anarrowonthe sidewall ofthe tire indicatesthecorrect direction ofrotation. Observethe direc‐tion ofrotation when installing.
Slidethe wheeltobe mounted ontothealignment bolt and push it on.
\nWARNINGRisk of injuryfrom tighteningwheel bolts and nuts
Ifyou tightenthe wheel bolts or wheel nutswhenthevehicle israised,the jack could tip.
Only tighten wheel bolts or wheel nutswhenthevehicle is onthe ground.
Be suretoobservethe instructions andsafety notes on "Changing a wheel"(→page 405).
For safetyreasons, onlyuse wheel boltswhich havebeen approvedbyMercedes-Benz andforthe wheel inquestion.
NOTEDamagetopaintwork ofthe wheelrim when screwing onthefirst wheel bolt
Ifthe wheel hastoo much play when screw‐ing inthefirst wheel bolt,the wheelrim paintcan be damaged.
Pressthe wheelfirmlyagainstthewheel hub when screwing onthefirstwheel bolt.
Tightenthe wheel boltsevenly in a diagonalpattern inthe order indicated untiltheyarefinger-tight.
Unscrewthe alignment bolt.
Tightenthe last wheel bolt until it isfinger-tight.
Lowerthevehicle (→page413).
Loweringthevehicle after a wheelchange
Requirements:RThe new wheel has been installed(→page412).
Placetheratchet ontothe hexagon nut ofthejack sothatthe letters "AB" are visible.
Tolower thevehicle:turntheratchet ofthejack counter-clockwise.
Wheels and tires413