1Frontroof area
2Rearroof area
3Rearfenders
4Trunk lid
Onvehicles with a panoramic sliding sunroof,installing an antennatothe front orrearroofarea is not permitted.
Ontherearfenders, it isrecommendedthatyouinstallthe antenna onthe side ofthevehicleclosesttothe center oftheroad.
UseTechnical Specification ISO/TS21609 (RoadVehicles – "EMCsfor installation of aftermarketradio frequency transmitting equipment") whenretrofitting two-wayradios. Comply withthelegalrequirementsfor detachable parts.
Ifyourvehicle has installationsfor two-wayradioequipment, usethe power supplyand antennaconnectorsprovided inthe pre-installation. Besuretoobservethe manufacturer's supplementswhen installing.
Two-wayradio transmission outputThe maximum transmission output (PEAK) atthebase ofthe antenna must notexceedthevaluesinthefollowingtable.
Frequency band and maximum transmissionoutput
Frequency band Maximum transmis‐sion output
Shortwave
3 -54MHz
(100 W)
4 m frequency band
74- 88 MHz
(30 W)
2 m frequency band
144 -174 MHz
(50 W)
Trunkedradio sys‐tem/Tetra
380 - 460 MHz
(10 W)
70 cm frequencyband
420 - 450 MHz
(35 W)
Two-wayradio(2G/3G/4G)(10 W)
416Technical data
Thefollowing devices can be used inthevehiclewithoutrestrictions:
RTwo-wayradios with a maximum transmis‐sion output of upto100 mW
RTwo-wayradios with transmitter frequenciesinthe 380 -410 MHz frequency band and amaximum transmission output of upto2 W(trunkedradio system/Tetra)
RMobile phones (2G/3G/4G)
There are norestrictions when positioningtheantenna onthe outside ofthevehicleforthefol‐lowing frequency bands:
RTrunkedradio system/Tetra
R70 cm frequency band
R2G/3G/4G
Vehicle identification plate, VIN and enginenumber
Vehicle identification plate
Vehicle identification plate (USA only)
1Permissiblegrossweight
2Permissible front axle load
3Permissiblerear axle load
4Paint code
5VIN (vehicle identification number)
Technical data417