button MERCEDES-BENZ E CLASS 2019 Service Manual

Activatesor deactivateSthe function.
Removing condensation from the windows
Windows fogged up onthe inside
PresstheXbutton.
Ifthe windowscontinuetofog up: pressthedbutton.
Windows fogged up onthe outside
Switchonthe windshield wipers.
PresstheXbutton.
Switching air-recirculation mode on/off
Presstherbutton.The interior air will berecirculated.
Air-recirculation mode automatically switchestofresh air mode after some time.
If air-recirculation mode is switched on,thewindowsmayfog up morequickly.Switch onair-recirculation mode only briefly.
Switchingtheresidual heat on or off
Requirements:RThevehicle is parked.
It is possibletomake use oftheresidual heatfromthe enginetocontinue heating orventilat‐ingthe front compartment ofthevehicleforapproximately 30 minutes.
Toswitch on:pressthebutton.
Residual heat is switched off automatically.
Activating/deactivating ionization
Multimedia system:
VehiclebClimate Control Ioniza-
tion
Ionization cleans andrefreshesthe interior air ofthevehicle. The ionization ofthe interior air isodorless.
Activatesor deactivateSthe function.
Fragrance system
Settingthe fragrance system
Requirements:RAutomatic climatecontrol is activated.
RTheglovebox is closed.
Multimedia system:
VehiclebClimate Control Air
Freshener
The fragrance system distributes a pleasant fra‐grancethroughoutthevehicle interior from afla‐con located intheglovebox.
Tosetthe intensity:selectHigh,Medium,LoworOff.
Inserting orremoving theflacon ofthe fra‐grance system
\nWARNINGRisk of injuryfrom liquid per‐fume
Ifchildren opentheflacon,theycould drinkthe liquid perfume or it could come into con‐tact with theireyes.
134Climate control

1Airvent controller
2Airvent
Toopen or close:turn controller1totheleft orright.
Adjusting the AIRSCARFvents
\nWARNINGRisk of burns causedbytheheating output from AIRSCARF beingtoohigh
When AIRSCARF is switched on,veryhot aircanflowfromthe outlet opening inthe headrestraints.
This couldresult in burns inthe immediatevicinity ofthe outlet opening.
Turnthe heating output down in goodtime.
Maintain a suitable distance fromtheoutlet opening.
NOTEDamagecausedtoAIRSCARFbythe use of protective covers
If a protective cover is placedoverthe frontseat headrestraints,theflowof air fromtheAIRSCARFvent is hindered.
This can cause AIRSCARFtooverheat and bedamaged.
Do not use protective coverson headrestraints with AIRSCARF.
Make surethatthere are no objects coveringtheintakegrille onthe back ofthe headrestraint.
You can adjustthe blower output of AIR‐SCARFvents1usingthe AIRSCARF button(→page97).
Adjustthe height of AIRSCARFvents1andthe current of airbyadjustingthe height ofthe headrestraint (→page 92).
Climate control137

Driving
Notes on Mercedes-AMGvehicles
Observethe notes onthefollowingtopics intheSupplement. Otherwise,you may notrecognizedangers.
RAMGPerformanceexhaust system
RAMG adaptive sport suspension system
Switching onthe power supplyor ignitionusingthestart/stop button
\nWARNINGRisk of accident and injuryduetochildren left unattended inthevehicle
Ifchildren are left unattended inthevehicle,theycould:
Ropen doors,thereby endangeringotherpersons orroad users.
Rget out ofthevehicle and be hitbyoncoming traffic.
Roperate vehicle equipment and becometrapped,forexample.
In addition,children could also setthevehi‐cle in motion,forexample,by:
Rreleasingthe parking brake.
Rshiftingthe automatic transmission out ofpark position].
Rstartingthe engine
Never leavechildren and animals unat‐tended inthevehicle.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
Keepthe SmartKeyout ofthereach ofchildren.
\nDANGERRisk offatal injuries duetoexhaustgases
Combustion engines emit poisonousexhaustgases such as carbon monoxide. Inhalingtheseexhaustgases is hazardoustohealthand can leadtopoisoning.
Never leavethe enginerunning in anenclosed space without sufficientventi‐lation.
\nWARNINGRisk offirecausedbyflam‐mable material ontheexhaust system
Flammable materials brought inbyeither ani‐mals or environmental influences may igniteiftheycome into contact withhot parts ofthe engine orexhaust system.
Therefore,checkregularlythatthereare noflammable materials intheengine compartment or ontheexhaustsystem.
Requirements:RThe SmartKeyis located inthevehicle andthe SmartKeybattery is not discharged.
13 8Driving and parking

Toswitch onthe power supply:press but‐ton1once.You can activatethe windshield wipers,forexample.
The power supplyis switched off again ifthefol‐lowing conditions are met:
RYou openthe driver's door
RYou press button1twice.
Toswitch onthe ignition:press button1twice.The indicator lamps inthe instrument clusterlight up.
The ignition is switched off again if one ofthefollowing conditions is met:
RYou do notstartthevehicle within15minutes andthe transmission is in posi‐tion]orthe electric parking brake isapplied.
RYou press button1once.
Startingthevehicle
Startingthevehicle withthestart/stop but‐ton
Requirements:RThe SmartKeyis located inthevehicle andthe SmartKeybattery is not discharged.
Shiftthe transmissiontoposition]or\\.
Depressthe brake pedal and press button1once.
Ifthevehicle does notstart:switch off non-essential consumers and press button1once.
Ifthevehiclestill does notstart andthePlace the Key in the Marked Space SeeOperator's Manualdisplay message alsoappears inthe multifunction display:startthevehicle in emergency operation mode.
You can switchoffthe engine while drivingbypressing button1for aboutthree seconds. Besuretoobservethe safety notes under "Drivingtips".
Startingthevehicle in emergency operationmodeIfthevehicle does notstart andthePlace theKey in the Marked Space See Operator's Manualmessage appears inthe multifunction display,you canstartthevehicle in emergency operationmode.
Driving and parking13 9

Make surethat marked space2is empty.
RemoveSmartKey1fromthekeyring.
Place SmartKey1in marked space2.Thevehicle willstart after a short time.
IfyouremoveSmartKey1from markedspace2the engine continuesrunning.Forfurthervehiclestarts however,SmartKey1must be located in marked space2duringthe entire journey.
Havethe SmartKey1checked at aqualifiedspecialistworkshop.
Ifthevehicle does notstart:
Place SmartKey1in marked space2andleaveitthere.
Depressthe brake pedal andstartthevehicleusingthestart/stop button.
You can also switchonthe power supplyorthe ignition withthestart/stop button.
Startingthevehicle viaRemoteOnline serv‐ices
Cooling or heatingthevehicle interior beforecommencingyour journey
This function is notavailable in all countries.
Ifyoustartthevehicle viayour smartphone,thepreviously selected air conditioning adjustmentis active.
Ensurethefollowing beforestartingthe engine:
RThe legalstipulations inthe area whereyourvehicle is parked allow enginestarting viasmartphone.
RIt is safetostart andrunthe engine whereyourvehicle is parked.
RThe fueltank is sufficientlyfilled.
RThestarter battery is sufficientlycharged.
You can also setthetemperature withyoursmartphone. Information on Mercedes meconnect andother services: http://www.mercedes.meThis function is notavailablefor all models.
Chargingthe batterybefore commencingyour journey
This function is notavailable in all countries.
RIfthevehicle battery is discharged,youreceivea message onyour smartphone.
RYou canthenstartthevehicle withthesmartphonetochargethe battery.
RThevehicle is automatically switched offafterten minutes.
Ensurethefollowing beforestartingthe engine:
RThe legalstipulations inthe area whereyourvehicle is parked allow enginestarting viasmartphone.
RIt is safetostart andrunthe engine whereyourvehicle is parked.
14 0Driving and parking

Deactivating or activatingthe ECOstart/stop function
Press button1.If indicator lamp2lights up,the ECOstart/stop function is activated.
Depending onthe model andthevehicleequipment,the button may also be locatedat a different position inthe center console.
ECO display function
The ECO display summarizesthe drivingcharac‐teristics fromthestart ofthe journeytoits com‐pletion and assistsyou in achievingthe mosteconomical drivingstyle.
You can influence consumption ifyou:
RDrive with particular care
RDrivethevehicle in drive program;.
RObservethegearshiftrecommendations
The inner segment lights up green andthe outersegmentfills up:
R1Moderate acceleration
R2Gentle deceleration androlling
R3Consistent speed
The inner segment is grayandthe outer seg‐ment empties:
R1Sporty acceleration
R2Heavy braking
R3Fluctuations in speed
You havedriven economically when:
RThethree outer segments are completelyfil‐led simultaneously
RThe ECO display border lights up
The additionalrange achieved as aresult ofyourdrivingstyle in comparison with a driver with averysporty drivingstyle is shown underBonusfr. Start. Therange displayed does not indicateafixedreduction in consumption.
ECO Assist function
Vehicles with a 48 V on-board electrical sys‐tem (EQ Boosttechnology):
14 6Driving and parking

Engagingreversegear RDepressthe brake pedal and pushtheDIRECT SELECT lever upwards pastthefirstpoint ofresistance.The transmission position displayshows^inthe multifunction display.
Engaging neutral NDepressthe brake pedal and pushtheDIRECT SELECT lever up or downtothefirstpoint ofresistance.The transmission position displayshows\\inthe multifunction display.
Subsequentlyreleasingthe brake pedal willallowyoutomovethevehicle freely,e.g.topushit ortow itaway.
Proceed asfollowsifyouwantthe automatictransmissiontoremain in neutral\\\\even ifthe ignition is switched off:
Startthevehicle.
Depressthe brake pedal and engage neutral\\.
Releasethe brake pedal.
Switchthe ignition off.
Ifyouthenexitthevehicle leavingtheSmartKeyinthevehicle,the automatic trans‐missionremains in neutral\\.
Engaging park position PObservethe notes on parkingthevehicle(→page156).
Depressthe brake pedal untilthevehicle isstationary.
Whenthevehicle isstationary,press button].Parkposition is only engaged whenthe trans‐mission position display]is shown inthemultifunction display.If no transmission posi‐tion display]appears, securethevehicletoprevent it fromrollingaway.
Parkposition]is engaged automatically if oneofthefollowing conditions is met:
Ryou switchoffthe ignition whenthevehicleisstationary andthe transmission is in posi‐tion[or^.
Ryou openthe driver's door whenthevehicleisstationary or when driving at averylow
speed andthe transmission is in position[or^.
Tomaneuver with an open driver's door,openthe driver's door whilestationary andengage transmission position[or^again.
Engaging drive position DDepressthe brake pedal and pushtheDIRECT SELECT lever down pastthefirstpoint ofresistance.The transmission position displayshows[inthe multifunction display.
Whenthe automatic transmission is in transmis‐sion position[, it shiftsthegears automati‐cally.This depends onthefollowingfactors:
Rthe selected drive program
Rthe position ofthe accelerator pedal
Rthe driving speed
Driving and parking151

On uphill or downhill gradients, turnthe frontwheels sothatthevehiclerollstowardsthecurb if itstarts moving.
Applythe electric parking brake.
Engagetransmission position]in astation‐aryvehicle withthe brake pedal applied(→page151).
Switch offthe engine andthe ignitionbypressing button1.
Releasethe service brake slowly.
Get out ofthevehicle and lock it.
Whenyou parkthevehicle,you canstilloperatethe side windowsandthe panoramicsliding sunrooffor approximatelyfiveminutes ifthe driver's door is closed.
Garage door opener
Programming buttonsfor thegaragedooropener
\nWARNINGRisk of injurywhen openingor closing a door withthegaragedooropener
Whenyou operate or programthe door withthe integratedgaragedoor opener, people intherange of movement ofthe door maybecome trapped orstruckbythe door.
When usingthe integratedgaragedooropener, always make surethat nobodyis withintherange of movement ofthedoor.
Only operatethefollowing doors usingthegaragedoor opener:
RDoors with a safetystop andreversingfea‐ture.
RDoors which conformtothe currentU.S.safetystandards.
Requirements:RThevehicle has been parked outsidethegarageor outsidetherange of movement ofthe door.
RThe engine is switched off.
RThe ignition is switched on.
Thegaragedoor opener function is alwaysavailable whenthe ignition is switched on.
15 8Driving and parking

Check ifthe transmitter frequency oftheremotecontrol hasthe frequencyrange of280to868 MHz.
Radio equipment approval number:
RNZLMUAHL5 (USA)
R4112A-MUAHL5 (Canada)
Press and hold button1,2or3thatyouwishtoprogram.Indicator lamp4flashesyellow.
It cantakeupto20 seconds beforethe indi‐cator lampflashesyellow.
Releasethe previously pressed button.Indicator lamp4continuestoflashyellow.
Pointremotecontrol5from a distance of1 in (1 cm)to3 in (8 cm)towards buttons1,2or3.
Press and hold button6ofremotecontrol5until one ofthefollowing signals appears:RIndicator lamp4lights up green contin‐uously.Programming is complete.
RIndicator lamp4flashes green. Pro‐grammingwas successful.Additionally,
synchronization oftherolling code withthe door system must also be carried out.
If indicator lamp4does not light up orflashgreen:repeatthe procedure.
Release all ofthe buttons.
Theremotecontrolforthe door drive is notincluded inthe scope of delivery ofthegaragedoor opener.
Synchronizingtherolling code
Requirements:RThe door system uses arolling code.
RThevehicle must be withinrange ofthegaragedoor or door drive.
RThevehicle aswell as persons and objects,are located outsidetherange of movementofthe door.
Pressthe programming button onthe doordrive unit.Initiatethe nextstep within approximately30 seconds.
Press previously programmed button1,2or3repeatedly untilthe door closes.Whenthe door closes, programming is com‐pleted.
Driving and parking15 9

Please alsoreadthe operating instructionsforthe door drive.
Troubleshooting when programming theremotecontrol
Check ifthe transmitter frequency ofremotecontrol5is supported.
Replacethe batteries inremotecontrol5.
Holdremotecontrol5atvarious angles ata distance between 1 in (1 cm)to3 in (8 cm)in front ofthe insiderearview mirror.Yo ushouldtesteverypositionfor at least25 sec‐onds before trying another position.
Holdremotecontrol5atthe same anglesatvarious distances in front ofthe insiderearview mirror.You shouldtesteveryposi‐tionfor at least25 seconds before tryinganother position.
Notethat someremotecontrols transmitonlyfor a limited period, press button6onremotecontrol5again before transmissionends.
Alignthe antenna line ofthe door opener unitwiththeremotecontrol.
Support and additional information on pro‐gramming:
ROnthetoll free HomeLink®Hotline on1-800-355-3515 .
ROnthe Internet at http://www.homelink.com/mercedes.
Opening/closing agaragedoor
Requirements:RThe corresponding button is programmedtooperatethe door.
Press and hold buttons1,2or3untilthe door opens or closes.
If indicator lamp4flashesyellow afterapproximately 20 seconds: press and holdthe previously pressed button again untilthedoor opens or closes.
16 0Driving and parking