display MERCEDES-BENZ E CLASS 2019 Manual Online

Press briefly:returnstothe previous display
Press and hold: calls up main functions
You can navigate in menus and lists viatouch-sensitive surface1byusinga single-fingerswipe.
Toopen or close lists:swipe left orright.
Toselectthe menu item:swipe up, down,left orright.
Presstouchpad1.
Tomovethe digital map:swipe in anydirection.
Usethefollowing functions with a two-fingerswipe:
Tocall up main functions andfavorites:swipe down with twofingers. The swipe muststart inthe upper area ofthetouchpad.
Tozoom in and out of the map:movetwofingerstogether or apart.
Tocall upthe control menu ofthe lastactive audio source:swipe up with twofin‐gers. The swipe muststart inthe lower areaofthetouchpad.
Settingthe sensitivityfor thetouchpadMultimedia system:
SystemwInput
SelectTouchpad Sensitivity.
SelectFast,MediumorSlow.
Tosetthe pressure sensitivity:switchTouchpad Taponsor offS.Ifthe function is switched ons, atap onthetouchpad is enoughtoselect a menuitem.
Handwritingrecognition: switchingtheread-aloud function on/offMultimedia system:
SystemõAudio System Feedback
SwitchRead Out Handwriting Recognitiononsor offS.
Activating/deactivating haptic operatingfeedbackonthetouchpadMultimedia system:
SystemwInput
The function supportsyou when making entriesonthetouchpad and when selecting menus.
SwitchHaptic Operating FeedbackonsoroffS.Whenthe function is activated, atactilefeed‐back intheformof a vibration is effectedwhenthetouchpad is operated.
Selecting astation and track usingthetouchpadPresstheUbutton onthetouchpad.
or
Swipe up with twofingers. The swipe muststart inthe lower area ofthetouchpad.The control menu appearsforthe audiosourcethatwas last selected.Use onefingertoswipe up or down.Radio:the previous orthe nextstation is set.
Media source:the previous orthe next musictrackis selected.
Tohidethe control menu:swipe down withtwofingers. The swipe must start intheupper area ofthetouchpad.
Multimedia system251

RSlidingthe controller
Leavingthefavorites menu
Pressthe©button.
Addingfavorites
Adding predefinedfavorites
Pressthe©button.The main functions are displayed.
Navigate downwards twice.TheFavorites menu appears.
SelectNew Favorite.The categories are displayed.
Select a category.Thefavorites are displayed.
Select afavorite.
Storethefavoriteatthe desired position.If afavoritehas already been added atthisposition, it will beoverwritten.
Example: addingyourownfavorites
SelectVehicle.
SelectFull Screen: Consumption.
Press and holdthe©button untilthefavorites are displayed.
Storethefavoriteatthe desired position.
IfNo function available for saving.is shown,theselected function cannot be added.
RenamingfavoritesPressthe©button.The main functions are displayed.
Navigate downwards once.
Select afavorite.
Navigate downwards once.TheFavorites menu appears.
SelectRename.
Enterthecharacters.
Toconfirmthe entry:select¡.
MovingfavoritesPressthe©button.The main functions are displayed.
Navigate downwards once.
Select afavorite.
Navigate downwards once.TheFavorites menu appears.
SelectMove.
Movethefavorite tothe desired position.If afavoritehas already been added atthisposition, it will beoverwritten.
DeletingfavoritesPressthe©button.The main functions are displayed.
Navigate downwards once.
Select afavorite.
Navigate downwards once.TheFavorites menu appears.
Todelete:selectDelete.
SelectYes.
Torestoreallfavorites:selectReset All.A promptappears.
SelectYes.Thefavorites areresettothefactory set‐tings.
Multimedia system253

Switchingthe sound on/off
Onthe multifunctionsteering wheel
Onthe multimedia system
Tomute:pressvolume control1.Thecsymbol appears inthestatus lineofthe media display.
You will also hear traffic announcements andnavigation announcementseven whenthesound is muted.
Toswitch on:changethe media source orturnvolume control1.
Adjusting thevolume
Onthe multifunctionsteering wheel
254Multimedia system

Example:renamingfavorites
Call upthe "Renamingfavorites" function(→page 253).
Toenter acharacter:useyourfingertowritecharacters onthetouchpad.Thecharacter is entered inthe input line. Ifdifferent interpretations are possible,charac‐ter suggestions are displayed.
Toselect acharacter suggestion:swipe upor down onthetouchpad.
Resumecharacter input.
Toenter a space:swiperight whenthe cur‐sor is located inthe input line.
Todelete acharacter:swipe left whenthecursor is located inthe input line.
Toconfirmthe entry:pressthetouchpad.Tofinishcharacter entry:swipe upwards.
or
Pressthe8button.
Example: entering a destination (navigation)
Enterthe POI or address (→page271).
System settings
Display
Configuring display settingsMultimedia system:
SystemCDisplay and Designs
Styles
SelectDesigns.
SelectSport,ClassicorProgressive.
Adaptingthe ambient lightingfor thestyle
SelectAdjust Amb. Lighting.Activatesor deactivateSthe function.
This function adjuststhe ambient lightingforthe selected displaystyle.
Settingthe display brightness
SelectDisplay Brightness.
Select a brightnessvalue.
Switchingthe display off/on
Off:selectDisplay Off.
On:press a button,+,forexample.
Displaydesign
SelectDay/Night Design.
SelectAutomatic,Day DesignorNightDesign.
Additional displayareaDepending onthevehicle,various items of addi‐tional information can be shown. The additionaldisplay area comprisesthe left-hand orright-handthird ofthe display.
SelectAdditional Disp. Area.
Thefollowing display content can be selected:
RDynamic
Multimedia system257

RNavigation Map
RConsumption
RTime and Date
Timeand date
Settingthe time and dateautomaticallyMultimedia system:
System&Time and Date
DeactivateSManual Time Adjustment.The time and date are set automaticallyforthe selected time zone and summer timeoption.
The correct time isrequiredforthefollowingfunctions:
RRoute guidance with time-dependenttraffic guidance.
RCalculation ofexpected time of arrival.
Settingthe time zoneMultimedia system:
System&Time and Date Time
Zone:
The list of countries is displayed.
Select a country;.Depending onthe country, time zones aredisplayed.
Select a time zone.The time zone set is displayed afterTimeZone:.
Setting summer timeTheAutomatic Daylight Saving TimeandDay-light Saving Timeoptions cannot be selected inall countries.
Multimedia system:
System&Time and Date
Automatically
SwitchAutomatic Daylight Saving Timeonsor offS.
Manually
DeactivateSAutomatic Daylight SavingTime.
SelectDaylight Saving Time.
SelectOnorOff.
Setting the time and dateformatMultimedia system:
System&Time and Date Set For-
mat
Setthe date and timeformat;.
Settingthe time manually
Requirements:RTheManual Time Adjustmentfunction isswitched on.
Multimedia system:
System&Time and Date Set Time
Setthe hours.
Navigatetotherighttosetthe minutes.
Setthe minutes.
Confirmchanges whenexitingthe menu.
258Multimedia system

RWPS PBC
The connectiontoa secureWi-Fi network ismadebypressing a button (push button).
RSecuritykey
The connectiontoa secureWi-Fi network ismade via a securitykey.
Setting upWi-Fi
Requirements:RThe devicetobe connected supports one ofthethree means of connection described(→page 259).
Multimedia system:
SystemöConnectivity
Activating/deactivatingWi-Fi
SwitchWi-Fionsor offS.IfWi-Fiis deactivatedS, communication viaWi-Fitoall devices is interrupted. This alsomeansthat a connectiontothe HERMEScommunication module cannotbe estab‐lished. Then functions such as dynamicrouteguidance with LiveTraffic Information are notavailable.
Connectingthe multimedia system with adevice viaWi-FiThis function isavailable if a HERMES communi‐cation module is not installed.
The type of connection established must beselected onthe multimedia system and onthedevicetobe connected.
The connection procedure may differdepending onthe device.Followthe instruc‐tionsthat are shown inthe display.Furtherinformation (seethe manufacturer's operat‐ing instructions).
SelectInternet Settings.
SelectSearch for Wi-Fi Networks.
Using a securitykey
Select aWi-Fi network inthe list.
Havethe securitykey displayed onthe devicetobe connected (seethe manufacturer'soperating instructions).
Enterthis securitykey onthe multimedia sys‐tem.
Confirmthe entrywith¡.
All devices support a securitykey as ameans of connection.
Using a WPS PIN
Highlight aWi-Fi network inthe list.
Select

SelectGenerate Security Key.A connection will be established withthenewly created securitykey.
Tosavea securitykey:selectSave.When a new securitykey is saved, allexistingWi-Fi connections arethen disconnected. IftheWi-Fi connections are beingre-estab‐lished,the new securitykey must be entered.
Managing COMANDTouch devices
Requirements:RTheCOMANDTouch app is installed ontheexternal device (e.g.tablet or smartphone).
RWi-Fi is activated (→page 260) andthe mul‐timedia system is configured as aWi-Fi hot‐spot (→page261).
Multimedia system:
System COMAND Touch
Connecting and authorizing a new device
SelectAuthorize a New Device.
SelectConnect New Device.
Enterthe securitykey intheexternal device.ThePlease start COMAND Touch on yourdevice and follow the instructions.messageappears.
SelectContinue.
Acceptthe connectionrequest fromthe newdevice.
Enterthe PIN shown ontheexternal device.The device is authorized.
Authorizing a connected device
SelectAuthorize a New Device.The devices already connected are displayed.
SelectContinue Using Connected Devices.ThePlease start COMAND Touch on yourdevice and follow the instructions.messageappears.
SelectContinue.
The connectionrequest fromthe deviceAccept.
Enterthe PIN shown ontheexternal device.The device is authorized.
De-authorizingthe device
Select an authorized device fromthe list.A promptwill appear asking whetheryouwould liketode-authorizethe selecteddevice.
SelectYes.The device is de-authorized.
Activating/deactivatingchild safety lock
Multimedia system:
System Parental Control
Locking anexternal device
Select anexternal device.
SelectLock.The device connected viatheCOMANDTouch app is lockedsor unlockedS.
System language
Notes onthe system languageThis function allowsyoutodeterminethe lan‐guageforthe menu displaysandthe navigation
262Multimedia system

User profile
Setting a user profileMultimedia system:
SystemgPersonalization
Displaying a user profile whenstartingIfthis function is active, a promptappears whenstartingthe system asking which user profiletouse.
SelectDisplay Profile Selection after Start.
Activatesor deactivateSthe function.
Selecting a user profile
SelectGuest Profileor individual profile;.
Some settings fromthe user profile are onlyloaded whenthevehicle isstationary orwhenthe ignition is switched on.
Automatic synchronizationEach timethe ignition is switched off or on,theindividual user profiles are synchronized onthemultimedia system and onthe server.Thisensuresthatthe latest user profiles are alwaysavailable.
SelectAutomatic Synchronization.
Activatesor deactivateSthe function.
For more information about importing/exporting user profiles (→page 265).
Creating a user profileMultimedia system:
SystemgPersonalization Create
Profile
Enter a name.
Selectv.
Thefollowing information is saved inthe userprofile,forexample:
RSystem settings
RSettings intheTVtuner'schannel list
RNavigation and traffic information
The settings differ depending onthevehicleequipment.
Importing/exporting user profiles
Requirements:RThere is an Internet connection .
RA Mercedes me accountexists at http://www.mercedes.me.
RThePersonalizationservice is active.
Multimedia system:
SystemgPersonalization Manual
Export/Import
This function is notavailable in all countries.
Only individual profiles can be imported orexported.
The individual profiles are always collectivelyimported orexported.
Import:selectImport Profiles from Server.TheThe profile data import overwrites allexisting profile data. Do you want to con-tinue?message appears.
SelectYes.User profiles are imported.Export:selectExport Profiles to the Server.User profiles areexported.
Certain settings, such as address bookentries or previous destinations fromthenavigation system, are notexported.
Multimedia system265

Multimedia system:
System Software Update
Automatic update
SwitchAutomatic Online Updateons.Updates are performed.
The currentstatus ofthe updates is dis‐played.
Manual update
DeactivateSAutomatic Online Update.
Select an update fromthe list andstarttheupdate.
Activating the softwareupdate
Restartthe system.
Function of important system updatesImportant system updates may be necessaryforthe security ofyour multimedia system's data.Please installthese updates, or elsethe securityofyour multimedia system cannotbe ensured.
If automatic software updates are activated,the system updates will be downloaded auto‐matically (→page 266).
As soon as an update isavailablefor download,a corresponding message appearsonthe mediadisplay.
You havethefollowing selection options:
RDownload
The update will be downloaded inthe back‐ground.
RDetails
Information aboutthe pending systemupdate is displayed.
RLater
The update can be downloaded manually at alater time (→page 266).
Ifthe download is completed andthe update isreadyfor installation,you will be informed ofthisafterthe next ignition cycle,forexample.
Parkthevehicle safely in a suitable locationbeforestartingthe installation.
Requirementsforthe installation:
RThe ignition is switched on.
RThe engine is notrunning.
RNotes andwarnings havebeenread andaccepted.
RThe parking brake is applied.
If allrequirements are met,the update will beinstalled. The multimedia system cannotbeoperated whilethe update is being installed andvehicle functions arerestricted.
If errorsshould occur duringthe installation,themultimedia system automatically attemptstorestorethe previousversion. Ifrestoration ofthepreviousversion is not possible, a symbolappears onthe center console display.Pleaseconsult aqualified specialistworkshoptoresolvethe problem.
Reset function
Multimedia system:
System Reset
Personal data is deleted,forexample:
RStation presets
RConnected mobile phones
Multimedia system267

Starting a program
SelectRefresh,Warmth,Vitality,EnjoymentorWell-being.
The selected program willrunforten minutes.
Configuring a program
Call up further optionsÜforthe desiredprogram.
Switchthe functions included inthe programonsor offS.
Starting training
SelectTraining.
SelectMuscle Relaxation,Muscle Stimula-tionorBalance.The selected training videostarts and is dis‐played inthe media display.
SelectFull Screen: Video.The training video is displayed in full screen.
For more information on pausing or skippingthrough videos, see (→page 327).
If, during an active program, a functionrequire‐ment is no longer met, a corresponding messageappears. The activeprogram is canceled.
Navigation
Switching navigation on
Multimedia system:
Navigation
Alternatively: pressthe