oil MERCEDES-BENZ E-CLASS CABRIOLET 2018 Owner's Manual

ASSYST PLUS serv ice interval display
Fu nction of the ASS YST PLUS serv ice interval
displ ay
The ASS YST PLUS service inter val display in the
instrument display pr ovides information on the
re maining time or dis tance be fore the next
service due date.
Yo u can hidethis service message using the
back button on the left-hand side of thesteering
wheel.
Yo u can obtain fur ther information concerning
th e servicing of your vehicle from a qualified
specialist workshop, e.g. an authorized
Mercedes-Benz Center.
Displaying the service due da te
On-board computer:
00866HUYLFH00CF$66<67 3/86
The next service due date is displa yed.
00BBTo exitth e displa y:press the back button
on the left-hand side of thesteering wheel. Make sure
toobser vethefo llowing fur ther rela‐
te d subjec t:
ROperating the on-board computer
(→page 200).
Car rying out maintenance workatregular
inter vals
0075 NO
TEPremature wearthro ugh failure to
obser veservice due dates
Service workwhich is not car ried out at the
ri ght time or incomple tely can lead to
inc reased wear and damage totheve hicle.
00BBAlw ays obser vethe prescribed service
inter vals.
00BBAlw ays ha vethe prescribed service
wo rkcar ried out at a qualified specialist
wo rkshop.
Special service requ irements
The prescribed service inter val is based on nor‐
mal operation of theve hicle. Maintenance work will need
tobe per form ed more of tenth an
specified if theve hicle is operated under ardu‐
ous conditions or increased loads, forex ample:
Rregular city driving with frequent intermedi‐
ate stops.
Rif th eve hicle is primarily used for short-dis‐
ta nce driving.
Rfor frequent operation in mountainous terrain
or on poor road sur faces.
Rifth e engine is of ten le ftidling for long peri‐
ods.
Rin particula rly dusty condition sand/o rif air -
re circulation mode is frequently used.
In these or similar operating conditions, ha vethe
interior air filter, engine air cleaner, engine oil, oil
fi lter etc. changed more frequent ly.Th etire s
must be checked more frequently if theve hicle
is operated under increased loads. Further infor‐
mation can be obtained at a qualified specialist
wo rkshop.
31 4
Maintenance and care

Engine oil
Checkingthe engine oil le vel using the oil
dip stick
0071
WARNING Risk of burn s from hot com‐
ponent parts in the engine compartment
Cer tain component parts in the engine com‐
partment can be very hot, e.g. the engine,
th e cooler and parts of theex haust sy stem.
00BBLet the engine cool down and only
to uch the component parts described
as follo ws .
Depending on the engine, the oil dipstick may be
ins talled in the engine compartment in dif fere nt
locations.
Wa iting time before checking the oil le vel:
REngine at normal operating temp erature: five
minutes.
00BBPa rk theve hicle on a le vel sur face.
00BBPull oil dipstick 1out and wipe off.
00BBSlowly slide oil dipstick 1into the guide
tube tothestop, and pull it out again af ter
appr oximately thre e seconds.
ROil le vel is cor rect: oil le vel is between 2
and 3.
ROil le velto o low: oil le vel is at 3or
belo w.
ROil le velto o high: oil le vel is abo ve2.
00BBIfth e oil le vel is too lo w,top up with
1. 1 US qt (1 l) of engine oil.
00BBIf th e engine oil le vel is too high, ha vethe
exc ess engine oil remo ved immediately at a
qu alified specialist workshop.
Ad ding engine oil
0071
WARNING Risk of burn s from hot com‐
ponent parts in the engine compartment
Cer tain component parts in the engine com‐
partment can be very hot, e.g. the engine,
th e cooler and parts of theex haust sy stem.
00BBLet the engine cool down and only
to uch the component parts described
as follo ws .
0071
WARNING Risk offire and injury from
engine oil
If engine oil comes into con tact wi thhot
component parts in the engine compart‐
ment, it may ignite.
31 8
Maintenance and care

00BBMake surethat no engine oil is spilled
next tothefiller opening.
00BBAllow the engine tocool off and thor‐
oughly clean the engine oil from compo‐
nent parts before starting theve hicle.
0075 NO
TEEngine damage causedbyan
incor rect oil filter, incor rect oil or addi‐
tives
00BBDo not use engine oils or oil filters
which do not cor respond tothe specifi‐
cations explicitly prescribed forth e
service inter vals.
00BBDo not alter the engine oil or oil filter in
order toachie velonger change inter vals
th an prescri bed.
00BBDo not use additives.
00BBFollow the instructions in the service
inter val display rega rding the oil
ch ange.
0075 NO
TEDama gecaused bytopping up too
much engine oil
Ad ding too much engine oil can cause dam‐
age tothe engine or the catalytic con verter.
00BBHa ve excess engine oil remo ved at a
qu alified specialist workshop.
00BBTu rn cap 1counter-clockwise and remo ve
it.
00BBAd d engine oil.
00BBReplace cap 1and turn it clockwise as far
as it will go.
00BBCheck the oil le vel again (→page 318).
Checking coolant le vel
0071
WARNING Risk of burn s from hot com‐
ponent parts in the engine compartment
Cer tain component parts in the engine com‐
partment can be very hot, e.g. the engine,
th e cooler and parts of theex haust sy stem.
00BBLet the engine cool down and only
to uch the component parts described
as follo ws .
0071
WARNING Danger of burn s from hot
coolant
The engine cooling sy stem is pressurized,
particularly when the engine is warm. If you
Maintenance and care 31
9

RRemo vethe SmartK eyin order toensure that
th e wind deflector on the windshield retracts.
RAc tive Dis tance Assist DISTRONIC and the
HOLD function are deactivated.
RThe 360° Camera or there ar view camera is
switch ed off.
RThe side windo wsand soft top are closed
comple tely.
RTh eblowe rfo rth eve ntilation/heating is
switched off.
RThe windshield wiper switch is in position
005A.
RIn car washes with a towing mechanism: neu‐
tral 005Cis engaged.
RThe SmartK eyis at a dis tance of at least
10 ft(3 m) away from theve hicle, otherwise
th e trunk lid could open unintentionally.
00CE If, af terth e car wash, youre mo vethewa x
from the windshield and wiper rubber, this
will pr event smearing and reduce wiper
noise.
Information on using a high-pre ssure cleaner
0071
WARNING Risk of accident when using
high-pressure cleaning equipment wi th
ro und-spr aynozzles
The wate r jet from a round-spr aynozzle (dirt
grinder) may cause damage totires and sus‐
pension components that is not visible.
Components damaged in this wa yma yfa il
unexpec tedly.
00BBDo not use high-pressure cleaning
equipment wi thround-spr aynozzles to
clean your vehicle.
00BBDamaged tires or suspension compo‐
nents must be replaced immediatel y.
Toavo id damage to yourvehicle, obser vethefo l‐
lowing when using a high-pressure cleaner:
RKe ep the SmartK eyat least 10ft(3 m) away
from theve hicle. Otherwise the trunk lid
could open unintentionall y.
RMaintain a distance of at least 11.8 in
(30 cm) totheve hicle.
RVe hicles with deco rative foil: parts of your
ve hicle are co vered with a decorative foil.
Maintain a dis tance of at least 27.6 in
(70 cm) between thefo il-c ove red parts of the
ve hicle and the nozzle of the high pressure
cleaner. Mo vethe high-pressure cleaner noz‐
zle around whilst cleaning.
RObser vethe information on the cor rect dis‐
ta nce in the equipment manufacturer's oper‐
ating instructions.
RDo not point the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tires, the soft top, the wind deflector net,
slits, electrical component parts, batteries,
light sources and ventilation slot s.
Washing theve hicle byhand
Obser vethe legal requirements, e.g. in a number
of countries, washing byhand is only permitted
in specially designated wash ba ys.
00BBUse a mild cleaning agent, e.g. car shampoo.
322
Maintenance and care

Notes on paintwo rk/matt finish paintwork care
Observethefo llowing information:
Cleaning and car eA voiding paintwork damage
Pa intwork
RInsect remains: soak with insect remo ver and rinse off the
trea ted areas af terw ards.
RBird droppings: soak with water and rinse off af terw ards.
RCoolant, brake fluid, tree resins, oils, fuel and greases:
re mo veby gently rubbing with a clo thsoaked in petroleum
et her or lighter fluid.
RTa rst ains: use tarre mo ver.
RWa x: use silicone remo ver.
RDo not attach sticke rs,fi lms or similar.
RRe mo vedirt immediatel y,where possible.
Matt finish
ROnly use care products appr oved byMercedes-Benz.RDo not polish theve hicle and light-alloy wheels.
ROnly use car washes that cor respond tothe latest engi‐
neering standards.
RDo not use car wash programs with a final hot wax treat‐
ment.
RDo not use paint cleane rs, buf fing or polishing products,
gl oss preser vers, e.g. wax.
RAlw ays ha vepaintwork repairs car ried out at a qualified
specialist workshop.
324
Maintenance and care

Notes on cleaning and care of the soft top
Obser vethefo llowing information:
Note s on cleaning and car eA voiding soft- top damage
Light soiling
RClean the soft top when dr y.
RRinsewit hclean water.
RNever use gasoline, thinners, tarre mo ver or stain remo ver
or other or ganic sol vents.
RRe mo vebird droppings immediatel y,as they are cor rosive
and can therefore cause the soft- topfabric toleak.
RNe ver use a high-pre ssure cleaner.
RDo not use sharp-edged equipment toremo veice and
sno w.
Norm
alto heavy
soiling
RClean the soft top with a brush and clean water.
RClean stains and other dirt with a brush and soft-top
cleaning agents recommended and appr ovedby
Mercedes-Benz.
RAlw ays brush from front toback in the direction of the
fa bric.
Fr equent cleaning reduces the soft top's resist‐
ance todirt. Torestore the ef fect, clean the soft
to p with the care products and cleaning agents
re commended and appr ovedby Mercedes-Benz.
Incor rect cleaning and care, as well as aging,
can cause the soft- top seams toleak. Ha vethe
soft-top seams sealed at a qualified specialist wo
rkshop, e.g. at your Mercedes-Benz service
cen ter.
00CE Place a suitable co verove rth e soft top if you
plan tolea vetheve hicle outside for a long
period of time.Cleaning AI RCAP
Cleaning the wind deflector
Re quirements:
RThe soft top is closed.
RApply the electric parking brake manually.
RThe ignition is switched on.
Maintenance and care 325

RNever use a high-pre ssure cleanertoclean
th e net of the wind deflector.
00BBPull button 1.
The wind deflector between the windshield
and the soft topex tends.
00BBLight soiling: clean wind deflector net 1
with a soft brush or a moist clo th.
00BBHeavier soiling: clean wind deflector net 1
with care products and cleaning agents rec‐
ommended and appr ovedby Mercedes-Benz.
00BBSubsequentl y,rinse off wi thclean water.
Cleaning the wind screen
Re quirements:
RThe soft top is open.
RApply the electric parking brake manually.
RThe ignition is switched on.
00BBPull button 1.
The AIR CAP wind screen mo ves upwards.
326
Maintenance and care

Observethefo llowing information:
Cleaning and car eA voiding vehicle damage
Seat belts Clean with lukewarmand soapy water.
RDo not use chemical cleaning agents.
RDo not dry seat belts byheating them toove r17 6 °F
(80 °C) or exposing them todirect sunlight.
Display Cleanthe sur face carefully wi tha micro fiber clo thand
TFT/LCD display care product.
RSwit choff the display and let it cool down.
RDo not use any other cleaning products.
Plastic trim
RClean with a damp microfiber clo th.
RFo r heavy soiling: use care product recommended by
Mercedes-Benz.
RDo not attach sticke rs,fi lms or similar.
RDo not allow cosmetics, insect repellent or sun cream to
come in contact wi th the plastic trim.
Re alwo od/t rim ele‐
ments
RClean wi tha micro fiber clo th.
RBla ckpiano-lac quer look: clean with a damp clo thand
soap solution.
RFo r heavy soiling: use care product recommended by
Mercedes-Benz. Do not use solvent-based cleaning agents, polishes or
waxes.
Ro of lining
Clean with a brush or dry shampoo.
Carpet Use carpet andtextile cleaning agents recommended by
Mercedes-Benz.
330 Maintenance and care

Uniform Tire Quality Grading Standards: a
uniform standard tograde thequ ality of tires
with rega rd totread quality, tire traction and
te mp erature characteristics. The quality grading
assessment is made bythe manufacturer follow‐
ing specifications from theU. S. go vernment. The
qu ality grade of a tire is imprinted on the side
wa ll of the tire.
Re commended tire pressure :th ere commen‐
ded tire pressure is the tire pressure specified
fo rth e tires mounted totheve hicle at thefa c‐
to ry.
The tire and information table conta insthere c‐
ommended tire pressures for cold tires, the max‐
imum permissible load and the maximum per‐
missible vehicle speed.
The tire pressure table conta insthere commen‐
ded tire pressures for cold tires under various
operating conditions, i.e. loading and/or speed
of theve hicle.
Increased vehicle weight due tooptional
equipment: the combined weight of all standard
and optional equipment available forth eve hicle, re
ga rdless of whe ther it is actually ins talled on
th eve hicle or not.
Rim: the part of the wheel on which the tire is
ins talled.
GA WR (Gross Axle Weight Rating): the GAWR
is the maximum permissible axle load. The
actual load on an axle must ne verexc eed the
gros s axle weight rating. The gross axle
weight
ra ti

ng can be found on theve hicle identification
plate on the B‑pillar on the driver's side.
Speed rating: the speed rating is pa rtof the tire
identification. It specifies the speed range for
which a tire is appr oved.
GV W (Gross Vehicle Weight): the gross vehicle
we ight comprises thewe ight of theve hicle
including fuel, tools, the spare wheel, accesso‐
ri es ins talled, occupants, luggage and the trailer
dr aw bar nose weight, if applicable. The gross
ve hicle weight must not exceed the gross vehicle
we ight rating GVWR as specified on theve hicle
identification plate on the B‑pillar on the driver's
side.
GV WR (Gross Vehicle Weight Rating): the
GV WR is the maximum permitted gross weight of
the fully laden vehicle (weight of theve hicle
including all accessories, occupants, fuel, lug‐
ga ge and the trailer dr awbar nose weight if appli‐
cable). The grossve hicle weight rating is speci‐
fi ed on theve hicle identification plate on the
B‑pillar on the driver's side.
Maximum weight of the laden vehicle: the
maximum weight is the sum of the curb weight
of theve hicle, thewe ight of the accessori es,the
maximum load and thewe ight of optional equip‐
ment ins talled at thefa ctor y.
Kilopascal (kPa): metric unitfor tire pressure .
6.9 kPa cor responds to1 psi. Ano ther unit for
tire pressure is bar.
10 0 ki
lopascal (kPa) equals
1 bar.
Load index: in additiontothe load-bearing
index, the load index may also be imprinted on
th e side wall of the tire. This specifies the load-
bearing capacity of the tire more precisel y.
Curb weight: thewe ight of a vehicle with stand‐
ard equipment including the maximum capacity
of fuel, oil and coolant. It also includes the air
conditioning sy stem and optional equipment if
Wheels and tires 37
1

Thewear patte rns on the front and rear wheels
dif fer:
RFr ont wheels wear more on the shoulder of
th e tire
RRe ar wheels wear more in the center of the
tire
On vehicles that ha vethe same size front and
re ar wheels, rotat eth e wheels according tothe
inter vals in the tire manufacturer's warranty
book in your vehicle documents. If this is not
av ailable, rotate the tires every
3,000 to6,000 miles (5,000to10,000 km),
depending on thewe ar. Ensure that the direction
of rotation is maintained.
It is impe rative toobser vethe instructions and
saf etyno tes on "Wheel change" when doing so.
Note s onstoring wheels
RAf terre moving wheels, store them in a cool,
dry and preferably dark place.
RPr otect the tires from conta ct withoil, grease
or fuel.
Overview of the tire-chan getool kit
Apart from some countr y-specific variants, vehi‐
cles are not equipped with a tire-change tool kit.
Fo r more information on which tire-changing
to ols are required and appr oved for per form ing a
wheel change on your vehicle, consult a qualified
specialist workshop.
Necessary tire-changing tools may include, for
ex ample:
RJack
RChock
RWheel wrench
RCentering pin
The tire-change tool kit is located in tool bag 1.
1Tool bag
To ol bag 1contains:
RJack
RGloves
RWheel wrench
RCentering pin
RFo lding wheel chock
RRa tchet for jack
37 6
Wheels and tires