MERCEDES-BENZ E-CLASS CABRIOLET 2021 Owners Manual

ASS
YS
ASS YST PL
T PL US ser
US ser vice int
vice int erv
erval display
al display F
F
unction of t
unction of t he ASSYS
he AS SYST PL
T PL US ser
US ser vice int
vice int erv
erval dis-
al dis-
play
play The ASS
YST PLUS service inter val display on the
inst rument display informs you of the time or dis-
ta nce remaining before the next service due date.
Yo u can hide this service display using the back
button Gonthe leT-hand side of the steering
wheel.
Depending on how theve hicle is used, the
ASS YST PLUS service inter val display may shor ten
th e service inter val, e.g. in thefo llowing cases:
R Mainly short-distance driving
R When the engine is oTen leT idling for long
periods
R Intheev ent of frequent cold start phases
R V
V ehicles wit ehicles wit h a diesel par
h a diesel par ticulat
ticulate
e/lt
/lt er:
er: inthe
ev ent of frequently inter rupted rege neration of
th e diesel particulate /lter
Mercedes-Benz recommends avoiding such oper-
ating conditions. Yo
u can obtain information concerning the servic-
ing of your vehicle from a quali/ed specialist
wo rkshop, e.g. a Mercedes-Benz service cent re. Displa
Displa
ying t
ying t he ser
he ser vice due date
vice due date On-board computer:
4 Service 5
ASSYST PLUS
The next service due date is displa yed. #
T
T o e
o e xit t
xit t he displa y:
he displ ay:press the back button
G onthe leT-hand side of the steering
wheel.
Bear in mind thefo llowing related topic:
R Operating the on-board computer
(/ page 249). Inf
Inf
or
ormation on r
mation on r egular maint
egular maint enance w
enance work
ork *
N
NOOTE
TE Premature wearthro ugh failure to
obser veservice due dates Main
tenance workwhich is not car ried out at
th eright time or inco mplete ly can lead to
increased wear and damage totheve hicle. #
Adhere tothe prescribed service inter-
va ls. #
Always ha vethe prescribed maintenance
wo rkcar ried out at a quali/ed specialist
wo rkshop. N
No
ot
tes on special ser
es on special ser vice r
vice req
equir
uir ements
ements The prescribed service inter
val is based on nor-
mal operation of theve hicle. Ha vethe mainte-
nance workcar ried out more oTen than prescri-
bed if operating conditions are di1cult or the
ve hicle is subject toincreased stress.
The ASS YST PLUS service inter val display is only
an aid. The driver of theve hicle bears responsibil-
ity as rega rdsto whe ther maintenance work
needs tobe per form ed more oTen than speci/ed
based on the actual operating conditions and/or
loads.
Examples of arduous operating conditions:
R Regular city driving with frequent intermediate
stops
R Mainly short-distance driving 298 298
Maintenance and care

R
Frequent operation in mountainous terrain or
on poor road sur faces
R When the engine is oTen leT idling for long
periods
R Operation in particular lydusty conditions
and/or if air-recirculation mode is frequently
used
In these or similar operating conditions, ha vethe
interior air /lter, air /lter, engine oil and oil /lter,
fo rex ample, changed more frequentl y.The tyres
must be checked more frequently if theve hicle is
operated under increased loads. Further informa-
tion can be obtained at a quali/ed specialist work-
shop. Batt Batt
er
ery disconnection per
y disconnection per iods
iodsThe AS
SYST PLUS service inter val display can cal-
culate the service due date only when the battery
is connected. #
Display and no tedown the service due date
on the inst rument display before disconnect-
ing the battery (/ page 298). Engine com
Engine com
par
partment
tment A
A
ctiv
ctiv e bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otection)
ection) Oper
Oper
ation of t
ation of t he activ
he active bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otec-
ec-
tion)
tion)
In cer tain accident situations, the actuation of the
active bonnet reduces therisk of injury topedes-
trians. The rear area of the bonnet is raised by
appr oximately 80 mm.
ATer being triggered, the active bonnet remains in
th era ised position. Limited visibility due tothe
ra ised bonnet cannot be ruled out.
ATer the active bonnet has been actuated, pedes-
trian pr otection may be limited.
Ha ve the full functionality of the active bonnet
re stored immediatel y in aquali/ed specialist
wo rkshop.
If necessar y,adjust your seat position and drive
carefully toaqu ali/ed specialist workshop. If a
safe continued jou rney is not possible, contact a
qu ali/ed specialist workshop. Opening and closing t Opening and closing t
he bonnet
he bonn et &
W
WARNI NG
ARNI NGRisk of accident due todriving
with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine
bonnet is loc ked. &
W
WARNING
ARNING Risk of accident and inju ry
when opening and closing the bonnet
The bonnet may suddenly drop into the end
position.
There is a risk of injury for an yone in the
engine bonnet's range of mo vement. #
Do not open or close the bonnet if there
is a person in the bonnet's range of
mo vement. Maintenance and care
299 299

&
W
WARNI NG
ARNI NGRisk of burns when opening the
bonnet
If yo u open the bonnet in theev ent of an over-
heated engine or /re in the engine compart-
ment, thefo llowing situations may occur:
R You may come into contact with hot gases.
R You may come into contact with other
escaping hot operating 0uids. #
Before opening the bonnet, allow the
engine tocool down. #
Intheev ent of a /re in the engine com-
partment, keep the bonnet closed and
call the /re service. &
W
WARNING
ARNING Risk of injury due tomoving
parts
Components in the engine compartment may
continue torun or start unexpectedly even
when the drive system is switched o..
Obser vethefo llowing if you must open the
bonnet: #
Switch o. theve hicle. #
Neverto uch the danger zones sur round-
ing moving components, e.g. thero tation
area of thefa n. #
Remo vejewe llery and watches. #
Keep items of clo thing and hair away
from moving pa rts. &
W
WARNING
ARNING Risk of injury from touching
components under voltage
The ignition system and the fuel injection sys-
te m operate at high voltage. You could receive
an elect ric shoc k. #
Neverto uch ignition system or fuel injec-
tion system components when theve hi-
cle is switched on. The live components include
thefo llowing, for
ex ample:
R Ignition coils
R Fuel injectors R
Electric lines tothe ignition coils and the fuel
injectors &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of injury from using the
windscreen wipers when the bonnet is
open
If th e windscreen wipers start moving when
th e bonnet is open, you could be trapped by
th e wiper linkage. #
Always switch o. the windscreen wipers
and theve hicle /r stifyo u need toopen
th e bonnet. 300
300
Maintenance and care

Opening t
Opening t
he bonnet
he bonnet #
Torelease the bonnet, pull on handle 1. #
Push handle 1ofthe bonnet catch upwards
and liT the bonnet until it opens automaticall y.
Closing t
Closing t he bonnet
he bonnet #
Lowe rth e bonnet toa height of around 20 cm
and then allow it tofall, applying a little force
as you let it go. #
Ifth e bonnet can still be liTed slightl y,open
th e bonnet again and close it with a little more
fo rc e until it engages cor rectl y. Engine oil
Engine oil
Chec
Chec
king t
king t he engine oil lev
he engine oil lev el using t
el using the on-board
he on-board
com
com put
puter
er
R
R eq
eq uir
uir ements:
ements:
R The engine has been warmed up.
R The vehicle is par ked on a le vel sur face.
R The engine is running at idle speed.
R The bonnet is closed.
The engine oil le vel is de term ined during driving.
De term ining the engine oil le vel can take up to
30 minutes with a normal driving style and even
longer with an active driving style. Maintenance and care
301
301

On-board computer:
4 Service 5
Engine oil level
One of thefo llowing message s will appear onthe
inst rument displa y:
R Engine oil level Measuring now: measu rement
of the oil le vel is not yet possible. #
Repeat there qu est aTer a maximum of
30 minutes' driving.
R Engine oil level OK andthe bar display for
indicating the oil le vel on the inst rument dis-
play is green and is between "min" and "max":
th e oil le vel is cor rect.
R Engine oil level Add 1,0 l andthe bar display
fo r indicating the oil le vel on the inst rument
display is orange and is below "min": #
Add 1 l of engine oil.
R Reduce engine oil level andthe bar display for
indicating the oil le vel on the inst rument dis-
play is orange and is abo ve"max": #
Drain o. any excess engine oil that has been
added. Todo so, consult a quali/ed specialist
wo rkshop.
R For engine oil level turn on ignition #
Switch on theve hicle tocheck the engine oil
le ve l.
R Engine oil level System inoperative: The oil
le ve l sensor is defective or not connected. #
Consult a quali/ed specialist workshop.
R Engine oil level System currently unavail. #
Close the bonnet.
T
T opping up engine oil
opping up engine oil &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of /re and injury from
engine oil
If engine oil comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Make sure that no engine oil is spilled
next tothe /ller opening. #
Allow the engine tocool o. and thor-
oughly clean the engine oil from compo-
nent parts before starting theve hicle. *
N
NOOTE
TE Engine damage caused byan inco r-
re ct oil /lter, incor rect oil or additi ves #
Do not use engine oils or oil /lters which
do not cor respond tothe speci/cations
ex plicitly prescribed forth e service inter-
va ls. #
Follow the inst ructions on the service
inter val display forch anging the engine
oil and obser vethe prescribed change
inter vals. #
Do not use additives. 302 302
Maintenance and care

*
N
N O
OTE
TE Damage caused bytopping up too
much engine oil To
o much engine oil can damage the engine or
th e catalytic con verter. #
Have excess engine oil remo ved at a
qu ali/ed specialist workshop. %
Depending on driving st yle, theve hicle con-
sumes up to0.8 litre of oil per 1000 km. The
oil consum ption may be higher than this when
th eve hicle is new or if you frequently drive at
high engine speeds. #
Turn cap 1anti-clockwise and remo veit. #
Top up the engine oil. #
Replace cap 1and turn it clockwise until it
engages. #
Check the oil le vel again (/ page 301). Chec
Chec
king t
king t he coolant lev
he coolant lev el
el &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of scalding from hot cool-
ant
If yo u open the cap, you could be scalded. #
Let the mo tor cool down before opening
th e cap. #
When opening the cap, wear pr otective
glo ves and saf ety glasses. #
Open the cap slo wlytorelease pressure. Maintenance and care
303
303

#
Park theve hicle on a le vel sur face. #
Check the coolant temp erature display in the
inst rument clus ter.
The coolant temp erature must be below 70°C. #
Slowly turn cap 1anti-clockwise torelease
ove rpressure. #
Continue turning cap 1anti-clockwise and
re mo veit. The coolant le
vel is cor rect in thefo llowing cases:
R Ifth e engine is cold, the coolant is up to
mar ker bar 2.
R Ifth e engine is warm,th e coolant is up to
1.5 cm overth e mar ker bar 2. #
If necessar y,top up with coolant that has
been appr ovedfo r Mercedes-Benz.
% Further information on coolant (/ page 365) T
T
opping up t
opping up t he windscr
he windscreen w
een washer syst
asher syst em
em &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. 304 304
Maintenance and care

#
Remo vecap 1bytheta b. #
Top up thewa sher 0uid.
% Further information about the windscreen
wa sher 0uid (/ page 366) K
K
eeping t
eeping t he air
he air-w
-wat
ater duct fr
er duct fr ee
ee #
Keep the area between the bonnet and the
windscreen free of deposits, e.g. ice, snow
and lea ves. Cleaning and care
Cleaning and care
Inf
Inf
or
ormation on w
mation on w ashing t
ashing the v
he vehicle in a car w
ehicle in a car w ash
ash &
W
WARNING
ARNING Risk of an accident due to
re duced braking po wer aTer washing the
ve hicle
Braking e1ciency is reduced aTer washing the
ve hicle. #
ATer theve hicle has been washed, brake
carefully while paying attention tothe
tra1c conditions until braking po wer has
been fully restored. *
N
NOOTE
TE Dama gefrom au tomatic braking If one of
thefo llowing functions is switched
on, theve hicle brakes automatically in cer tain
situations:
R Active Brake Assist
R Active Distance Assist DISTRONIC
R HOLD function
R Active Parking Assist
To avoid damage totheve hicle, deactivate
th ese systems in thefo llowing or similar situa-
tions: #
during towing #
in a car wash *
N
NOOTE
TE Damage due tounsuitable car wash #
Before driving into a car wash make sure
th at the car wash is suitable forth eve hi-
cle dimensions. Main
tenance and ca re
305
305

#
Ensure there is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R toavo id possible water ing ress in theve hicle,
it is preferable touse car washes which allow
th e high-pressure pre-cleaning tobe deactiva-
te d (speci/cation forth e cabriolet prog ram).
R avoid any hot-wax treatment.
R make sure that the wind de0ector on the wind-
screen has been retracted.
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The 360° Camera or there ve rsing camera is
switched o..
R the side windo wsand soT top are closed com-
ple tely. R
The blo werfo rth eve ntilation and heating is
switched o..
R the windscreen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid could
open unintentionall y.
R For car washes with a con veyor system:
- neutral iis engaged.
- Ifyo uwo uld like tolea vetheve hicle while
it is being washed, make sure theke y is
located in theve hicle. The park position
j isotherwise automatically engaged.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W
WARNING
ARNING Risk of an accident when using
high-pressure cleaners with round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. To
avo id damage toyour vehicle, obser vethefo l-
lowing when using a high-pressure cleaner:
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid could
open unintentionall y.
R Maintain a distance of at least 30 cm tothe
ve hicle.
R V Vehicles wit
ehicles with decor h decorativ
ative f
e foil:
oil: Parts of your
ve hicle are co vered with a decorative foil. 306
306
Maintenance and care

Maintain a distance of at least 70 cm between
th efo il-co vered parts of theve hicle and the
nozzle of the high-pressure cleaner. Mo vethe
high-pressure cleaner nozzle around whilst
cleaning. The waterte mp erature of the high-
pressure cleaner must not exceed 60°C.
R Obser vethe information on the cor rect dis-
ta nce in the equipment manufacturer's oper-
ating inst ructions.
R Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts, such as
tyres, soT top, wind de0ector net, gaps, elec-
trical components, batteries, light sources and
ve ntilation slits. W W
ashing t
ashing t he v
he vehicle b
ehicle b y hand
y hand *
N NOOTE TE Engine damage due towa ter ing ress #
Take care not topoint thewa ter jet
directly towa rdsth e air inlet grille below
th e bonnet. obser
vethe legal requ irements, e.g. in a number
of countries, washing byhand is only permitted in
special lydesignated wash ba ys. #
Use a mild cleaning agent, e.g. car shampoo. #
Washtheve hicle with luk ewarm water using a
soT car sponge. When doing so, do not
ex pose theve hicle todirect sunlight. #
Carefully hose theve hicle o. with water and
dry using a chamois.
% Obser vethe no tes on the care of car parts
(/ page 311). N No
ot
tes on paintw
es on paintw or
ork/matt
k/matt /nish
/nishpaintw
paintw or
ork care
k care To
avo id damaging the paintwork and inter fering
with the driving assistance systems, please
obser vethefo llowing no tes:
P
P aint
aint
R Insect remains: soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: soak with water and rinse o.
aTer wards. R
Tree resin, oils, fuels and greases: remo veby
ru bbing gently with a clo thsoaked in petro-
leum ether or lighter 0uid.
R Coolant and brake 0uid: remo vewith a damp
clo thand clean water.
R Tar stains: use tarre mo ver.
R Wax: use silicone remo ver.
R Do not attach sti ckers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a quali/ed specialist workshop.
R Remo vedirt immediatel y,where possible.
Matt Matt /nish /nish
R Only use care products appr ovedfor
Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a qu ali/ed specialist workshop.
R Do not polish theve hicle and light-alloy
wheels.
R Only use car washes that cor respond tothe
latest engineering standards. Maintenance and care
307
307