fold seats MERCEDES-BENZ E-CLASS CABRIOLET 2022 Owners Manual

*
N
NO
OTE
TE Damage tothe draught stop due to
collision with seat backrests The draught stop may collide with
the front
seat backrests when /t ted. #
Adjust the backrest positions of the front
seats. The
folding draught stop is /t tedover there ar
seats toprotect against wind when you are driving
with the soT top open. Only the front seats can be
occupied when thefo lding draught stop is /t ted.
The bag containing thefo lding draught stop is
attached totheth ro ugh-loading feature behind
th ere ar seats. If theth ro ugh-loading feature is
being used, loosen the bag's lashing strap and
st ow it in the boot. Fasten the lashing strap tothe
luggage hook.
Yo u should preferably per form operations in volv-
ing thefo lding draught stop on the side of the
ve hicle facing away from tra1c. #
Open all side windo wsand the soT top. #
Open all side windo wsand the soT top. #
Foldthere ar seats forw ard toremo vethe bag. #
Remo vethefo lding draught stop from the bag. #
Fold out folding draught stop 1as shown. #
Fold out the two brac kets 2 onthe leT and
ri ght. #
Align brac kets 2 offolding draught stop 1
with the two rear /xtures 3ontheve hicle. 92 92
Opening and closing

#
T
To mov
o mov e f
e forw
orw ar
ards:
ds: pull the head restraint for-
wa rds. #
T
To mov
o mov e bac
e backw
kwar
ards:
ds: press release knob 1
and push the head restraint ba ckwards. F
F
itting/r
itting/r emo
emoving t
ving t he r
he rear seat head r
ear seat head r es
estr
tr aints
aints
R
R emo
emo ving
ving #
Release there ar seat backrest and fold it for-
wa rds slightly (/ page 120). #
Push release knob 1inthe direction of the
ar ro w and pull the head restraint up and out. Inst
Inst
alling
alling #
Inse rtthe head restraint su chthat the notches
on the bar are on the leT when vie wed in the
direction of tr avel. #
Push the head restraint down until it engages. #
Foldthere ar seat backrest back until it
engages. Con/gur
Con/gur
ing
ingt
the seat se
he seat se ttings
ttings Multimedia system:
4 © 5
Comfort 5
Seat comfort
A
A djus
djusting t ting t he bac
he bac kr
kres
es t cont
t cont our in t
our in t he lumbar
he lumbar
r
r egion of t
egion of t he seat bac
he seat bac kr
kres
es t (lumbar)
t (lumbar) #
Select Lumbar. #
Select the settings Zforth e desired seat. #
Adjust the air cushions.
A
A djus
djus ting t
ting t he bac
he bac kr
kres
est side bolst t side bolst ers
ers #
Select Side bolsters. #
Adjust the air cushion forth e desired seat. 106
106
Seats and st
owing

#
T
To f
o f old f
old f orw
orwar
ard:
d: pull seat release handle 1
and fold the seat backrest forw ards as far as it
will go.
The seat will automatically mo vetothefo re-
most position. #
T To f
o f old bac
old bac k:
k:swing the seat backrest back
horizontall y.
If th e seat backrest is not engaged, this will be
shown on the multifunction display on the
inst rument clus ter. A wa rning tone will also
sound.
The seat will automatically mo vetothe stored
position. F F
olding t
olding t he fr
he front seat bac
ont seat bac kr
kres
est f t forw
orw ar
ards/bac k-
ds/bac k-
w
w ar
ar ds (v
ds (v ehicles wit
ehicles wit hout memor
hout memor y function)
y function) F F
olding f olding f orw
orwar
ards
ds #
If necessar y,release the head restraint and
push it down. #
Pull seat release handle 1and fold the seat
backrest forw ards until the seat backrest
engages. #
Push the seat as farfo rw ards as it will go.
F
F olding back
olding back #
Push the seat back horizontally bythe seat
backrest until it reaches the seat position that
wa s pr eviously set. #
Foldthe seat backrest back until it engages.
Do so as smoo thly as possible.
If th e seat backrest is not engaged, this will be
shown on the multifunction display on the
inst rument cluster. A warning tone will also
sound. #
ATer the seat backrest has been folded bac k,
ch eck the position of the head restraint and
set it tothe cor rect position.
If th e set seat position can no longer be reached,
e.g. because of lug gage inthere ar foot we ll or
because occupants ha veentered there ar of the
ve hicle: #
Pull seat release handle 1again and return
th e seat backrest toan upright position.
The seat will lock in the new fore -and-aT posi-
tion. Seats and st
owing
109
109

#
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. U
Unloc
nloc king
king #
Foldrelease le ver1 down as far as it will go. #
Adjust height 2and distance 3tothe
stee ring wheel.
Loc
Loc king
king #
Foldrelease le ver1 up as far as it will go. #
Check and make sure that the steering col-
umn is loc kedby moving the steering wheel. A
A
djus
djus ting t
ting t he st
he steer
eering wheel electr
ing wheel electr ically
ically The steering wheel can be adjusted when
the
po we r supply is disconnected. 1
Toadjust the distance tothe steering wheel
2 Adjusting the height #
Save the settings with the memory function
(/ page 116). Seats and st
owing
113
113

Thr
Through-loading f
ough-loading f eatur
eature in t
e in the r
he rear benc
ear benc h seat
h seat
(EASY
(EASY -PAC
-P AC K Quic
K Quic kf
kfold)
old) F
F
olding t
olding t he r
he rear seat bac
ear seat bac kr
kres
est f t forw
orw ar
ards
ds &
W
WARNI NG
ARNI NGRisk of accident and injury if
th ere ar ben chseat/ rear seat and seat
backrest are not engaged
Re ar ben chseat, rear seat and seat backrest
can fold forw ards.
R As a result, theve hicle occupant is
pressed against the seat belt. The seat
belt cannot per form its intended pr otective
function and could cause additional inju-
ri es.
R Objects or loads in the boot cannot be
re strained bythe seat backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. Yo
u can fold the two seat backrests forw ard sepa-
ra tely. #
V Vehicles wit ehicles wit hout a memor
hout a memor y function:
y function:movethe
driver's or front passenger seat forw ards, if
necessar y. #
V Vehicles wit ehicles wit h a memor
h a memor y function:
y function: if at least
one section of there ar seat backrest is folded
fo rw ards, the cor responding front seat will
mo veforw ards slightl y,if necessar y,to avo id a
collision. #
If necessar y,fully insert the head restraints in
th ere ar seat backrest. #
Pull switch 1. #
Foldthe cor responding seat backrest for-
wa rds.
F
F olding bac
olding bac k t
k the r
he r ear seat bac
ear seat bac kr
krest
est
* NO
NOTE
TE Damage caused bytrapping the
seat belt when folding back the seat bac k-
re st The seat belt could become trapped and
thus
be damaged when the seat backrest is folded
bac k. #
Make sure that the seat belt is not trap-
ped when folding back the seat backrest. #
V
Vehicles wit
ehicles wit hout a memor
hout a memor y function:
y function:movethe
driver's or front passenger seat forw ards, if
necessar y. #
V
Vehicles wit
ehicles wit h a memor
h a memor y function:
y function: if at least
one part of the seat backrest in there ar is fol-
ded bac k, the cor responding front seat will 120
120
Seats and st
owing

automatically
return tothe most recent origi-
nal position. #
Foldthe cor responding seat backrest 1back
until it engages.
If th e seat backrest is not engaged and
loc ked, this will be shown on the multifunction
display on the inst rument cluster. Ov Ov
er
ervie
vie w of t
w of t he tie-do
he tie-do wney
wn eyes
es Obser
vethe no tes on loading theve hicle
(/ page 117). 1
Tie-down eyes
Ve hicles with a draught stop: there is an addi-
tional tie-down eye behind there ar ben chseat
backrests. Toaccess this, the seat backrests
must be folded down (/ page 120). Ov
Ov
er
er vie
vie w of bag hooks
w of bag hooks &
W
WARNING
ARNING Risk of injury when using bag
hooks with heavy objects
The bag hooks cannot restrain he avy objects
or items of lug gage.
Objects or items of luggage may be 0ung
around and hit vehicle occupants. #
Only hang light objects on the bag
hooks. #
Never hang hard, sharp-edged or fragile
objects on the bag hooks. Subject
the bag hooks toa maximum load of 1 kg
and do not attach any goods tothem. Seats and st
owing
121 121

1
Bag hook
% Obser vethe no tes on loading theve hicle
(/ page 117). A
A
tt
tt ac
ac hing t
hing t he lugg
he lugg ag
age net
e net &
W
WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone brac kets cannot alw aysreta in all
objects they contain.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects in such a wayth at
th ey cannot be thro wn around in such
situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot. Obser
vethe no tes on loading theve hicle. #
Fold up the tie-down eyes. #
Hook luggage net 1into the front and rear
tie-down eyes. 122
122
Seats and st
owing

*
N
N O
OTE
TE Increased risk of damage toprop-
erty due tofolded-out ball neck #
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball
neck or, in the case of a fully electric
trailer hitch, retract the ball nec k. *
N
N O
OTE
TE The ope rating permit may be in vali-
dated due tothe illegal installation of
trailer hitches The installation – including
retro/tting – of a
non- folding or non-remo vable trailer hitch that
eve n partial lyconceals the license plate or the
lighting system is prohibited. #
Obser vethe applicable legal regulations
fo rth e installation of trailer hitches. Depending on
the bicycle rack 's design, up to
th re e bicycles can be transpor ted on the bicycle
ra ck.
When mounted byattaching toball head 1,the
maximum load capacity is 75 kg.
The maximum load capacity is calculated from the
we ight of the bicycle rack and the bicycle rack
load. Obser
vethe no tes on driving with a roof load,
trailer or fully laden vehicle (/ page 160).
When using a bicycle rack , set the tyre pressure
fo r increased load on there ar axle of theve hicle.
Fu rther information on the tyre pressure can be
fo und in the tyre pressure table (/ page 340).
N
No ot
tes on loading
es on loading
The lar gerth e distance between the load's centre
of grav ity and the ball head, thegr eater the load
on the trailer hitch.
Therefore, obser vethefo llowing no tes:
R mount heavy bicycles as close totheve hicle
as possible
R always distribute the load on the bicycle rack
as evenly as possible across theve hicle's lon-
gitudinal axis
Mercedes-Benz recommends removing all de tach-
able parts from bicycles (e.g. bask ets, ch ild seats,
re ch arge able batteries) before loading them onto
th e bicycle rack . This will impr ovethe aerody-
namic resis tance and centre of grav ity of the bicy-
cle rack. Driving and parking
247
247