instrument panel MERCEDES-BENZ E-CLASS COUPE 2009 Owners Manual

Exterior view
....................................... 22
Cockpit ................................................. 23
Instrument cluster ..............................25
Multifunction steering wheel .............28
Centre console .................................... 29
Overhea dcontrol panel ...................... 31
Door control panel .............................. 32 21At
ag lance
207_AKB ;2;3,en-GB
mkalafa, Version:2.11.8.1
2009-07-23T10:23:49+02:0
0-Seite 21

X
Pull the light switch out to the first detent.
The green 0066indicator lamp in the instru-
ment cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The green 0066indicator lamp in the instru-
ment cluster goes out.
Rear foglamp On vehicles with front foglamps
X
Turn the key to position 2in the ignition
lock.
X To switch on: turn the light switch to
0064 or006C.W hen the light switch is set
to 0066,y ou cannot switch on the rear fog-
lamp.
X Pull the light switch out to the secon dstop.
The yellow 006Aindicator lamp in the
instrument cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The yellow 006Aindicator lamp in the
instrument cluster goes out.
On vehicles without front foglamps
X Turn the key to position 2in the ignition
lock.
X To switch on: turn the light switch to
0064.W hen the light switch is set to
0066,y ou cannot switch on the rear fog-
lamp.
X Pull the light switch out to the stop.
The yellow 006Aindicator lamp in the
instrument cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The yellow 006Aindicator lamp in the
instrument cluster goes out.
Manua lmain-beam headlamps X
Turn the ignition key to position 2in the
ignition lock or start the engine.
X To switch on: turn the light switch to
0064. X
Press the combination switch beyond the
pressure point in the direction of arrow
0070 (Ypage 82).
The 0063 indicator lamp in the instrument
cluster lights up.
X To deactivate: move the combination
switch back to its normal position.
The 0063 indicator lamp in the instrument
cluster goes out.
Adaptive Highbeam Assist* You can use this function to set the head-
lamps to change between dipped-beam and
main-beam automatically. The system recog-
nises vehicles with their lights on, either
approaching from the opposite direction or
travelling in frontofy
our vehicle, and conse-
quently switches the headlamps from main
beam to dipped beam.
The system automatically adapts the dipped-
beam headlamp range depending on the dis-
tancetot he other vehicle. When the system
no longer detect sany other vehicles it acti-
vates the main-beam headlamps again.
The optical sensor for the system is behind
the windscreen in the overhead control panel
area. Lights
83Controls
*optional
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 83 Z

X
Turn the ignition key to position 2in the
ignition lock or start the engine.
X To switch on: turn the light switch to
006C, 0064or0066.
X Press the 0066button.
The green 0066indicator lamp in the instru-
ment cluster lights up.
X To switch off: press the0066button.
The green 0066indicator lamp in the instru-
ment cluster goes out.
Rear foglamp i
If you switch the engine off (key in posi-
tion 1int he ignition lock) and then restart
it, the previous settings for the rear foglamp
are restored.
X Turn the ignition key to position 2in the
ignition lock or start the engine.
X Turn the light switch to 0064or0066 24
.
X To switch on: press the006Abutton.
The yellow 006Aindicator lamp in the
instrument cluster lights up.
X To switch off: press the006Abutton.
The yellow 006Aindicator lamp in the
instrument cluster goes out.
Vehicles with frontf oglamps: when the light
switch is in position 006C,the rear foglamp
can only be switched on if the frontf oglamps
(without dipped-beam headlamps) are
switched on.
Manua lmain-beam headlamps X
Turn the ignition key to position 2in the
ignition lock or start the engine.
X To switch on: turn the light switch to
0064. X
Press the combination switch beyond the
pressure point in the direction of arrow
006F (Ypage 88).
The 0063 indicator lamp in the instrument
cluster lights up.
X To deactivate: move the combination
switch back to its normal position.
The 0063 indicator lamp in the instrument
cluster goes out.
Adaptive Highbeam Assist* You can use this function to set the head-
lamps to change between dipped-beam and
main-beam automatically. The system recog-
nises vehicles with their lights on, either
approaching from the opposite direction or
travelling in frontofy
our vehicle, and conse-
quently switches the headlamps from main
beam to dipped beam.
The system automatically adapts the dipped-
beam headlamp range depending on the dis-
tancetot he other vehicle. When the system
no longer detect sany other vehicles, it acti-
vates the main-beam headlamps again.
The optical sensor for the system is behind
the windscreen in the overhead control panel
area.
24 The automatic headlamps are only switched on if you start the engine. Lights
89Controls
*optional
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 89 Z