MERCEDES-BENZ E-CLASS COUPE 2021 Owners Manual

Oper
Oper
ating t
ating t he combination switc
he combination switc h f
h for t
or t he lights
he lights 1
High beam
2 Turn signal light, right
3 Headlamp 0ashing
4 Turn signal light, leT #
Use the combination switch toactivate the
desired function. Switc
Switc
hing on high beam
hing on high beam #
Turn the light switch totheL orÃ
position. #
Push the combination switch be yond the point
of resis tance in the direction of ar row 1.
When the high beam is activated, the indicator
lamp for low beam Lwill be deactivated
and replaced bythe indicator lamp for high
beam K.
Switc
Switc hing
hingo.
o.high beam
high beam #
Movethe combination switch back toits start-
ing position.
Headlam
Headlam p
p0ashing
0ashing #
Pull the combination switch in the direction of
ar ro w 3.
T
T ur
ur n signal light
n signal light #
T
T o indicat o indicat e
ebr
br ie0y:
ie0y: push the combination
switch brie0y tothe point of resis tance in the
direction of ar row 2 or4.
The cor responding turn signal light will 0ash
th re e times. #
T
To indicat o indicat e per
e permanentl y:
manent ly:push the combina-
tion switch be yond the point of resistance in
th e direction of ar row 2 or4. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the hazar
he hazar d w
d war
arning lights
ning lights #
Press button 1. 128
128
Light and sight

The hazard
warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is heavily braked from a speed of
more than 70 km/h toa standstill.
When you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using button 1.A
A
dap
dap tiv
tive functions, MUL
e functions, MUL TIBEAM LED
TIBEAM LED Int
Int
ellig
ellig ent Light Syst
ent Light Syst em function
em function
The MULTIBEAM LED headlamp s adapttothe
driving and weather situation and pr ovide exten-
ded functions for impr oved illumination of the
ro ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 129)
R Cornering light (/ page 129)
R Motorw ay mode (/ page 130)
R Enhanced fog light function (/ page 130)R
Bad weather light (/ page 130)
R City lighting (/ page 130)
The system is active only when it is dar k.
A
A ctiv
ctiv e headlam
e headlamps function ps function R
The headlamps follow the steering mo ve-
ments.
R Releva nt areas are better illumina ted during a
journe y.
The functions are active when the low beam is
switched on.
Depending on theve hicle's equipment, the course
of the lane in which you are driving will also be ev
aluated and the active headlamps function will
adjust the light in advance.
Cor
Cor ner nering light function
ing light function The cornering light impr
ovesth e illumination of
th e car riag ewa yove r a wide angle in the turning
direction, enabling better visibility on tight bends,
fo rex ample. It can be activated only when the low
beam is switched on.
The function is active in thefo llowing cases:
R Atspeeds below 40 km/h when the turn sig-
nal light is switched on or the steering wheel
is turned Light and sight
129 129

R
Atspeeds between 40 km/h and 70 km/h
and when the steering wheel is turned
R
R oundabout and junction function:
oundabout and junction function: the cornering
light will be activated on bo thsides based on an
ev aluation of theve hicle's cur rent GPS position. It
will remain active until aTer theve hicle has leT
th e roundabout or the junction.
Mot
Mot orwa
or wa y mode function
y mode function
Mo torw ay mode increases thera nge and bright-
ness of the cone of light, enabling better visibility. The function will be active if a mo
torw ay journey
is de tected bymeans of:
R theve hicle's speed R
the multifunction camera
R the navigation system
The function is not active in thefo llowing cases:
R at speeds below 80 km/h
Enhanced f
Enhanced f og light function
og light function
The enhanced fog light function reduces self-daz-
zling and impr oves the illumination of the edge of
th e car riag ewa y. The function is automatically activated under
the
fo llowing conditions:
R Atspeeds below 70 km/h and when there ar
fo g light is switched on. The function is automatically deactivated under
th
efo llowing conditions:
R When speeds greater than 100 km/h are
re ached.
R When there ar fog light is switched o..
F F unction of t
unction of t he bad w
he bad weat
eather light
her light
The bad weather light reduces re0ections in rainy
conditions bydimming individual LEDs in the
headlamps. The driver and other road users are
dazzled less as a result.
The city lighting function
The city lighting function
City lighting impr ovesth e illumination of roadsides
in urban areas using a broad distribution of light.
The function is active in thefo llowing cases:
R Atlow speeds
R In illuminated parts of urban areas
Switc Switc hing t
hing t he Int
he Int ellig
elligent Light Syst
ent Light Syst em
emon/o.
on/o.
R R eq
eq uir
uir ements:
ements:
R The vehicle is switched on. 130
130
Light and sight

Multimedia system:
4 © 5
Settings 5
Lights
5 Intelligent Light System #
Switch the function on or o.. A
A
dap
dap tiv
tive Highbeam Assist
e Highbeam Assist A A
dap dap tiv
tive Highbeam Assis
e Highbeam Assist function t function &
W
W ARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist
Ad aptive Highbeam Assist does not react to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist may failto recognise other road users
with their own lighting, or may recognise them
to o late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be activated despite
the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R In poor visibility, e.g. fog, heavy rain or snow
R Ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist is only an aid. You are
re sponsible for adjusting theve hicle's lighting to
th e pr evailing light, visibility and tra1c conditions. Ad
aptive Highbeam Assist automatically switches
between thefo llowing types of light:
R Low beam
R High beam
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y. Light and sight
131 131

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. 132 132
Light and sight

Ad
aptive Highbeam Assist Plus automatically
switches between thefo llowing types of light:
R Low beam
R Partial high beam
R High beam
R ULTRA RANGE Highbeam ULTRA RANGE Highbeam increases
the bright-
ness of the cone of light tothe legally permitted
maximum.
Pa rtial high beam does not include other road
users in the high beam area. It does not dazzle
th em but enables full high beam illumination for
th e driver apart from theex cluded vehicles.
At speeds below 25 km/h or when there is su1-
cient street lighting:
R The partial high beam and the high beam will
be switched o. automaticall y.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds abo ve40 km/h:
R If no other road users are de tected on a
st ra ight road, ULTRA RA NGE Highbeam will be
switched on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.R
If high ly re0ective signs are de tected, ULTRA
RANGE Highbeam will be switched o. auto-
maticall y.
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist Plus t Pluson/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
When the high beam is switched on automati-
cally in the dar k, the_ indicator lamp will
light up on the central display section of the
inst rument displa y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. Light and sight
133
133

Se
Se
tting t
tting t he lo
he low beam (v
w beam (v ehicles wit
ehicles wit h MUL
h MULTIBEAM
TIBEAM
LED headlam
LED headlam ps onl
ps only)
y) Multimedia system:
4 © 5
Settings 5
Lights
5 Dipped-beams #
Select Right-side traffic, Left-side trafficor
Automatic. Se
Se
tting t
tting t he e
he ext
xter
er ior lighting
ior lighting switc
switch-o.
h-o. dela
delay time
y time R
R
eq
eq uir
uir ements:
ements:
R The light switch is in theà position.
Multimedia system: 4 © 5
Settings 5
Lights
5 Ext. light. del. sw. off #
Set the swit ch-o. delay time.
When theve hicle engine is switched o., the
ex terior lighting will be activated forth e set
time. Switc
Switc
hing t
hing t he surr
he surr ound lighting
ound lighting on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Surround lighting
When Surround lighting is active,theex terior
lighting lights up for 40 seconds aTer theve hicle
is unloc ked. When you start theve hicle, the sur-
ro und lighting is deactivated and the automatic
driving lights are activated. #
Activate or deactivate the function. Int
Int
er
er ior lighting
ior lighting A
A
djus
djus ting t
ting t he int
he int er
erior lighting
ior lighting #
1 p Switches the front leT reading lamp
on/o. #
2 | Switches automatic interior lighting
cont rol on/o. #
3 c Switches the front interior lighting
on/o. #
4 u Switches there ar interior lighting
on/o. #
5 p Switches the front right reading
lamp on/o. 134
134
Light and sight

A
A
djus
djus ting t
ting t he ambient lighting
he ambient lighting Multimedia system:
4 © 5
Comfort 5
Ambient lighting
Se
Se tting t
tting t he colour
he colour #
Select Colour. #
Set the desired colour.
A
A djus
djus ting t
ting t he br
he br ightness
ightness #
Select Brightness. #
Adjust the brightness.
A
A ctiv
ctiv ating t
ating t he br
he brightness f
ightness f or zones
or zones #
Select Brightness. #
Select Brightness zones. #
Switch the function on or o..
or #
Set the brightness forth e desired zones.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed lighting
ed lighting #
Select Colour. #
Select Multi-colour. #
Select a colour combination. A
A
ctiv
ctiv ating multi-colour
ating multi-colour ed animation
ed animation #
Select Colour. #
Select Multi-colour animat..
The chosen colour combination will change at
prede/ned inter vals.
A
A ctiv
ctiv ating w
ating w elcome lighting
elcome lighting #
Select Colour. #
Select Welcome.
When theve hicle is unloc ked, a special ambi-
ent lighting sequence will run.
A
A ctiv
ctiv ating dependency on air conditioning se
ating dependency on air conditioning se t-
t-
tings
tings #
Select Colour. #
Select Climate .
If ch anges are made tothete mp erature set-
ting in theve hicle, the colour of the ambient
lighting will change brie0y. Switc
Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Int. light. del. sw. off #
Switch the swit ch-o. delay time on or o..
When this function is active, the interior light-
ing lights up for a short time aTer theve hicle
is loc ked. Light and sight
135
135

W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
s on/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Intermittent wiping, normal
3 Å Intermittent wiping, frequent 4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing: pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wiping with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 309). R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press and hold the
î button on the combination switch for
appr oximately thre e seconds (/ page 136).
The wiper arms will mo veinto there placement
position.
R R emo emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the wind-
screen. 136
136
Light and sight

#
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade away from
th e wiper arm in the direction of ar row 1 as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm in
th e direction of ar row 4. F
F
itting t
itting t he wiper blades
he wiper blades #
Insert the new wiper blade into the wiper arm
in the direction of ar row 1. #
Slide catch 2inthe direction of ar row 3
until it engages in the locking position. #
Make sure that the wiper blade is seated cor-
re ctl y. #
Foldthe wiper arms back onto the wind-
screen. #
Switch on theve hicle. #
Press theî button on the combination
switch.
The wiper arms will return totheir original
positions. #
Switch o. theve hicle.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing.
Maint Maint enance display
enance display
The maintenance display is available only with
standard windscreen wipers. Light and sight
137
137