display MERCEDES-BENZ E-CLASS COUPE 2022 Owners Manual

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Place the key in the
marked space See Owner's
Manual *K
eydetection is malfunctioning. #
Change the location of theke y in theve hicle. #
Place theke y in the slot for starting the engine with theke y (/ page 159). Lights Lights
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
:
Left dipped beam (examp le) *T
he cor responding light source is defecti ve. #
Drive on carefull y. #
Consult a quali/ed specialist workshop immediatel y.
% LED light sources: the display message forth e cor responding light appears only when all the light-emitting diodes
in the light are faulty.
: Malfunction See Owner's
Manual *T
heexterior lighting is malfunctioning. #
Consult a quali/ed specialist workshop.
*V Vehicles wit ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:a fuse may ha veblown. #
Stop theve hicle in accordance with the tra1c conditions. #
Check the fuses and replace them if necessary (/ page 337). Display messages and
warning/indicator lamps
381
381

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
:
Automatic driving lights
inoperative *T
he light sensor for automatic driving lights is malfunctioning. #
Consult a quali/ed specialist workshop.
:
Active Light System inoper-
ative *T
he active headlamps are malfunctioning. #
Consult a quali/ed specialist workshop.
:
Switch on headlamps *Y
ou are driving without lo w-beam headlamps. #
Turn the light switch totheL orà position.
:
Switch off lights *Y
ou are leaving theve hicle and the lights are still switched on. #
Turn the light switch totheà position. 382 382
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
:
Intelligent Light System
inoperative *T
he Intelli gent Light System is malfunctioning. The lighting system continues tofunction proper lywithout the functions
of the Intelligent Light System. #
Consult a quali/ed specialist workshop.
Adaptive Highbeam Assist
currently unavailable See
Owner's Manual *A
daptive Highbeam Assist is tempo rarilyuna vailable.
The system limits ha vebeen reached (/ page 134).
Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam
Assist available again displaymessage will appear. #
Drive on #
Operate the high beam manually until Adaptive High Beam Assist is available again.
Adaptive Highbeam Assist
inoperative *A
daptive Highbeam Assist is malfunctioning. #
Drive on
or #
Stop theve hicle in accordance with the tra1c conditions and restart theve hicle. #
Ifth e display message does not disappear: consult a quali/ed specialist workshop. #
Until then, operate the high beam manuall y. Display messages and
warning/indicator lamps
383
383

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Adaptive Highbeam Assist
Plus currently unavailable
See Owner's Manual *A
daptive Highbeam Assist Plus is tempo rarilyuna vailable.
The system limits ha vebeen reached (/ page 135).
Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam
Assist Plus available again displaymessage will appear. #
Drive on #
Operate the high beam manually until Adaptive High Beam Assist Plus is available again.
Adaptive Highbeam Assist
Plus inoperative *A
daptive Highbeam Assist Plus is malfunctioning. #
Drive on
or #
Stop theve hicle in accordance with the tra1c conditions and restart theve hicle. #
Ifth e display message does not disappear: consult a quali/ed specialist workshop. #
Until then, operate the high beam manuall y.
Hazard warning lamps mal-
functioning *T
he hazard warning lamp switch is malfunctioning. #
Consult a quali/ed specialist workshop. 384 384
Displ
aymessages and warning/indicator lamps

V
V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
d
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Check trailer hitch
lock (white display message) *T
he trailer hitch is not operational during a jou rney with a trailer. &
W WARNING
ARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Uncouple the trailer and secure it against rolling away. #
Initiate a new swivelling procedu reand do not re-couple the trailer until the display message disappears. #
Initiate a new swivel mo vement (/ page 245). #
When the display message disappears, couple up the trailer and drive on.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. 386
386
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Do not couple up the trailer. Drive on without the trailer. No tethere duced ground clearance due tothe unloc ked
ball nec k. #
Consult a quali/ed specialist workshop.
*W hen theve hicle is stationary with a coupled trailer, the trailer hitch is not operational. #
Uncouple the coupled trailer and secure it against rolling away. #
If t If the ball nec he ball nec k has been f
k has been f olded in:
olded in:unlockthe ball neck (/ page 245). #
Swivel the ball neck into the end position manually and let it engage. #
If t
If the ball nec
he ball nec k has been f
k has been f olded out
olded out::unlock the ball neck (/ page 245). #
Swivel the ball neck beneath the bumper manually and let it engage.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. #
Do not couple up the trailer. Drive on without the trailer. No tethere duced ground clearance due tothe unloc ked
ball nec k. #
Consult a quali/ed specialist workshop.
Head-up display currently
unavailable See Owner's
Manual *T
he head-up displ ayistemp orarily una vailable. Possible causes:
R malfunctions in the po wer supply
R signal inter fere nce #
Stop in accordance with the tra1c conditions and switch theve hicle o. and on again. #
Ifth e display message still appears, consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
387 387

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Head-up display inoperative *The head-up displ ayhas an internal er ror. #
Consult a quali/ed specialist workshop.
Ù
Steering malfunction
Increased physical effort
See Owner's Manual *T
he po wer steering assistance is malfunctioning. &
W WARNING
ARNING Risk of an accident due toaltered steering characteristics
If th e po wer assistance of the steering fails partially or comple tely,yo u will need touse more forc eto stee r. #
If safe steering is possible, drive on carefull y. #
Visit or consult a quali/ed specialist workshop immediatel y.Ù
Steering malfunction Stop
immediately See Owner's
Manual *T
he steering is malfunctioning. Steering capability is signi/cantly impaired. &
W WARNING
ARNING Risk of accident if steering capability is impaired
If th e steering does not function as intended, theve hicle's operating saf ety is jeopardised. #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and tra1c conditions. Do
not continue driving under any circums tances. #
Consult a quali/ed speciali stwo rkshop. Active bonnet malfunction
See Owner's Manual
*T
he active bonn et(pedest rian pr otection) is malfunctioning or inoperative aTer having already been triggered. #
Consult a quali/ed specialist workshop. 388 388
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
C *A
t least one door is open. #
Close all doors.
M *T
he bonn etis open. &
W
WARNING
ARNING Risk of accident due todriving with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine bonnet is loc ked. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Close the bonnet.
N *T
he boot lid is open. &
D
DAN
AN GER
GER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust gases such as carbon monoxide. Exhaust gases can enter theve hicle
interior if the boot lid is open when the engine is running, especially if theve hicle is in motion. #
Always switch o. the engine before opening the boot lid. #
Never drive with the boot lid open. Display messages and
warning/indicator lamps
389
389

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Close the boot lid.
_ Front left seat backrest not
locked (examp le) *T
he seat backrest of the cor responding front seat is not engaged. #
Foldthe seat backrest back until it engages.
¥
Top up washer fluid *T
hewasher 0uid le vel in thewa sher 0uid reser voir has dropped below the minimum. #
Top up thewa sher 0uid (/ page 311).
Wiper malfunctioning *The windscreen wiper is malfunctioning. #
Restart theve hicle.
If th e display message still appears: #
Consult a quali/ed specialist workshop. 390 390
Displ
aymessages and warning/indicator lamps

Engine
Engine
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
To switch off the engine,
press the Start/Stop but-
ton for at least 3 seconds
or 3 times. *Y
ou ha vepressed the start/s top button while theve hicle is in motion. #
Information about switching o. theve hicle while driving (/ page 158).
Cannot start engine See
Owner's Manual *T
hevehicle cann otbe star ted. #
Switch theve hicle o. and switch it back on #
Ifth e display message still appears, consult a quali/ed specialist workshop.
+
Top up coolant See Own-
er’s Manual *T
he coolant le vel is too lo w.
* N NO
OTE
TE Engine damage due toinsu1cient coolant #
Avoid long journe yswith insu1cient coolant. #
Add coolant (/ page 310). #
Have the engine cooling system checked at a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
391
391