warning MERCEDES-BENZ E-CLASS COUPE 2022 Owners Manual

#
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe
scr ews comple tely. Po
sition of the jack support points
* N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
WARNING
ARNING Risk of injury from incor rect
positioning of the jack
If yo u do not position the jack cor rectly at the
appropriate jacking point of theve hicle, the
jack could tip wi th theve hicle raised. #
Only position the jack at the appropriate
jacking point of theve hicle. The base of th
e jack must be positioned vertically
under the jacking point of theve hicle. *
N
NOOTE
TE Damage totheve hicle due tothe
jack If
yo u do not position the jack at the jack sup-
port points pr ovided forth is purpose, you
could damage your vehicle. #
Only position the jack at the jack sup-
port points pr ovided forth is purpose. #
Take thera tchet out of the tyre-change tool kit
and place it on the he xagon nut of the jack so
th at the letters "AUF" are visible. Wheels and tyres
353
353

F
F
itting a ne
itting a ne w wheel
w wheel R R
eq eq uir
uir ements:
ements:
R The wheel tobe changed is remo ved and the
cent ring pin is sc rewe d in (/ page 354).
* NO
NOTE
TEMercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
W ARNING
ARNING Risk of accident from losing a
wheel
Oiled or greased wheel bolts can cause the
wheel bolts tocome loose, as too can dam-
aged wheel bolts or wheel hub thre ads. #
Never oil or grease theth re ads. #
Intheev ent of damage totheth re ads,
contact a quali/ed specialist workshop
immediatel y. #
Have the damaged wheel bolts or dam-
aged hub thre ads replaced. #
Do not continue driving. #
Obser vethe information on thech oice of tyres
(/ page 346).
Fo r tyres with a speci/ed direction of rotation, an
ar ro w on the side wall of the tyre indicates the
cor rect direction of rotation. Obser vethe direc-
tion of rotation when /tting.
* N
NOOTE
TE Damage tothe wheels' plastic ele-
ments when changing a wheel Plastic elements on wheels may be damaged
when removing and repositioning the wheel. #
Do not raise the wheels bythe plastic
elements when removing and reposition-
ing. #
Slide the wheel tobe mounted onto the cen-
tring pin and push it on. &
W WARNING
ARNING Risk of injury from tightening
wheel bolts and nuts
If yo u tighten the wheel bolts or wheel nuts
when theve hicle is raised, the jack could tip. #
Only tighten wheel bolts or wheel nuts
when theve hicle is on thegr ound. #
Be sure toobser vethe inst ructions and saf ety
no tes on "Changing a wheel" (/ page 346). #
For saf etyre asons, only use wheel bolts which
ha ve been appr oved byMercedes-Benz and
fo rth e wheel in question. #
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated until they are
/nger-tight. #
Unscr ewand remo vethe centring pin. #
Tighten the last wheel bolt until it is /n ger-
tight. #
Lowe rth eve hicle (/ page 355). Low Low
er
ering t
ing t he v
he vehicle
ehicle aTer
aTera wheel c
a wheel c hange
hange R
R
eq
eq uir
uir ements:
ements:
R The new wheel has been /tted (/ page 355). #
T
To low
o low er t
er the v
he v ehicle:
ehicle: placethera tchet onto
th e he xagon nut of the jack so that the letters
"AB" are visible and turn anti-clockwise. Wheels and tyres
355
355

#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1to5 with
an initial maximum forc e of 80 Nm. #
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1to5 with
th e speci/ed tightening torque of 150 Nm. &
W
WARNING
ARNING Risk of accident due toincor-
re ct tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened tothe
prescribed torque. #
Ensure that the wheel bolts or wheel
nuts are tightened tothe prescribed
tightening torque. #
Ifyo u are not sure, do not mo vetheve hi-
cle. Con tact a quali/ed specialist work-
shop and ha vethe tightening torque
ch ecked immediatel y. #
Check the tyre pressure of the ne wly/tted
wheel and adjust it if necessar y.
% The following does not apply if the new wheel
is an emer gency spa rewheel. #
V
V ehicles wit
ehicles wit h tyr
h tyre pr
e pr essur
essur e loss w
e loss w ar
arning sy
ning sy s-
s-
t
t em:
em: restart the tyre pressure loss warning
system (/ page 346). #
V
V ehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: restart the tyre pressure monitoring sys-
te m (/ page 345). Emerg
Emerg
ency spar
ency spar e wheel
e wheel N
No
ot
tes on t
es on t he emerg
he emerg ency spar
ency spar e wheel
e wheel &
W
WARNING
ARNING Risk of accident caused by
incor rect wheel and tyre dimensions
The wheel or tyre size and the tyre type of the
emer gency spa rewheel or spare wheel and
th e wheel tobe replaced may di.er. The emer-
ge ncy spa rewheel or spare wheel can signi/-
cantly impair driving characteristics of the
ve hicle.
To prev ent hazardous situations: #
Drive carefull y. #
Never /t more than one emer gency
spa rewheel or spare wheel that di.ers
in size. #
Only use an emer gency spa rewheel or
spare wheel brie0y. #
Do not deacti vate ESP ®
. #
Have the emer gency spa rewheel or
spare wheel of a di.erent size replaced
at the nearest quali/ed specialist work- 356
356
Wheels and tyres

shop. The new wheel must ha
vethe cor-
re ct dimensions. %
The emer gency spa rewheel is secured in the
emer gency spa rewheel bag in the boot.
Obser vethefo llowing no tes on /tting an emer-
ge ncy spa rewheel:
R The maximum permissible speed with an
emer gency spa rewheel /tted is 80 km/h.
R Do not /t the emer gency spa rewheel with
snow chains.
R Replace the emer gency spa rewheel aTer six
ye ars at the latest, rega rdless of wear.
R Use the wheel bolts that are included with the
emer gency spa rewheel.
R Check the tyre pressure of the emer gency
spa rewheel /tted. Cor rect the pressure as
necessar y.
% The speci/ed tyre pressure is stated on the
label of the emer gency spa rewheel.
% V
V ehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e loss w
e loss w ar
arning
ning
syst
syst em:
em: if an emer gency spa rewheel is /tted,
th e tyre pressure loss warning system cannot function
reliabl y.Only restart the system
again when the emer gency spa rewheel has
been replaced with a new wheel.
V
V ehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: if an emer gency spa rewheel is /tted, the
tyre pressure monitoring system cannot func-
tion reliabl y.Fo r a few minutes aTer an emer-
ge ncy spa rewheel is /tted, the system may
still display the tyre pressure of there mo ved
wheel. Only restart the system again when the
emer gency spa rewheel has been replaced
with a new wheel.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 342)
R Tyre pressure table (/ page 343)
R Notes on /tting tyres (/ page 346)
R Fitting an emer gency spa rewheel
(/ page 351) Wheels and tyres
357 357

N
N
o
ot
tes on t
es on t ec
echnical data
hnical data
* NO
NOTE
TEMercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. The
tech nical data was de term ined in accordance
with EU Directives. The data stated only applies to
ve hicles with standard equipment. You can obtain
fur ther information from a Mercedes-Benz Service
Centre.
Onl Onl y f
y for cert
or cert ain countr
ain countr ies:
ies:you can /n dvehicle-
speci/c vehicle data in theCO C documents (CER-
TIFIC ATE OF CONFORMITY). These documents
are supplied when theve hicle is deli vered. On-boar
On-boar
d electr
d electronics
onics N
No
ot
tes on t
es on t am
amper
per ing wit
ing wit h t
h the engine electr
he engine electr onics
onics *
N
NOOTE
TE Premature wearthro ugh improper
maintenance Improper maintenance may cause
vehicle
components towe ar more quickly and the
ve hicle's operating permit may be in validated. #
Always ha veworkon the engine elec-
tronics and related components car ried
out at a quali/ed specialist workshop. T
T
w
w o-wa
o-wa y r
y radios
adios N
No
ot
tes on
es on /tting
/tting tw
two-wa
o-wa y r
y radios
adios &
W
WARNING
ARNING Risk of accident due to
improper workon two-w ayradios
If two-w ayradios are manipulated or retro/t-
ted incor rectl y,the electromagnetic radiation
from the two-w ayradios can inter fere with the
ve hicle elect ronics and jeopardise the operat-
ing saf ety of theve hicle. #
You should ha veall workon electrical
and electronic components car ried out
at a quali/ed specialist workshop. &
W
WARNING
ARNING Risk of accident due to
improper operation of two-w ayradios
If yo u use two-w ayradios in theve hicle
improper ly,th eir electromagnetic radiation
can disrupt theve hicle's elect ronics. This is
th e case in thefo llowing situations, in particu-
lar:
R The two-w ayradio is not connected toan
ex terior aerial.
R The exterior aerial is /tted incor rectly or is
not a lo w-re0ection aerial.
This could jeopardise the operating saf ety of
th eve hicle. #
Have the lo w-re0ection exterior aerial /t-
ted at a quali/ed specialist workshop. #
When operating two-w ayradios in the
ve hicle, alw ays connect them tothe lo w-
re 0ection exterior aerial. 358
358
Te
ch nical data

Oper
Oper
ating
ating 0uids
0uids N
No
ot
tes on oper
es on oper ating
ating0uids
0uids *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
W ARNING
ARNING Risk of injury from operating
0uids harmful toyour health
Operating 0uids may be poisonous and harm-
ful toyour health. #
Obser vethete xt on the original contain-
ers when using, storing or disposing of
operating 0uids. #
Always store operating 0uids sealed in
th eir original containers. #
Alwayske ep children away from operat-
ing 0uids. +
ENVIR
ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEPollution of the
environment due toirre sponsible disposal
of operating 0uids Incor
rect disposal of operating 0uids can
cause considerable damage tothe environ-
ment. #
Dispose of operating 0uids in an environ-
mentally responsible manner. Operating 0uids include
thefo llowing:
R fuels
R DeNOx agent AdBlue ®
forex haust gas aTer-
treatment
R lubricants
R coolant
R Brake 0uid
R windscreen washer 0uid
R climate cont rol system refrigerant
Only use products appro vedby Mercedes-Benz.
Damage caused bythe use of products that ha ve
not been app rove d is not co veredby the
Mercedes-Benz warranty or goodwill gestu res. The operating 0uids appr
ovedby Mercedes-Benz
can be identi/ed bythefo llowing inscriptions on
th e container:
R MB-F reigabe (e.g. MB-F reigabe 229.51)
R MB-Appr oval (e.g. MB -Appr oval 229.51)
Fu rther information on appr oved operating 0uids:
R inthe Mercedes-Benz Speci/cations for Oper-
ating Fluids byentering the designation
- at https://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop &
W WARNING
ARNING Risk of /re or explosion from
fuel
Fu els are highly 0ammable. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Before and during refuelling, switch o.
th eve hicle and, if /tted, the stationary
heater. Te
ch nical data
363
363

Inf
Inf
or
ormation on fuel q
mation on fuel q uality f
uality for v
or vehicles wit
ehicles wit h a die-
h a die-
sel engine
sel engine
Gener Gener al not
al notes
es
Obser vethe no tes on operating 0uids
(/ page 363). &
W
WARNING
ARNING Risk of /re from fuel mixtu re
If yo u mix diesel fuel with petrol, the 0ash
point of the fuel mixture is lo werth an that of
pure diesel fuel. #
Neverre fuel using petrol in diesel
engines. #
Never mix petrol with diesel fuel. *
N
NOOTE
TE Damage caused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system.
V
V ehicles wit
ehicles wit h a diesel par
h a diesel par ticulat
ticulat e
e/lt
/lt er:
er: #
Only refuel using sulphur-free diesel fuel
th at conforms toEuropean standard
EN 590, or an equivalent speci/cation.
In count ries without sulphur-free diesel
fuel, refuel using only lo w-sulphur diesel
fuel with a sulphur content less than
50 ppm.
V
V ehicle wit
ehicle wit hout diesel par
hout diesel par ticulat
ticulate
e/lt
/lt er:
er: #
Only refuel using diesel fuel wi tha sul-
phur content less than 500 ppm.
Ne verre fuel wi thone of thefo llowing fuels:
R Petrol
R Marine diesel
R Heating oil
R Pure fatty acid me thyl ester or veget able
oil
R Para1n or kerosene
If yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. The
following compatibility indications for fuel
apply toyour vehicle: 1
For diesel fuel with a maximum of 7% fatty
acid me thyl ester byvolume (bio-diesel)
2 For diesel fuel with a maximum of 10% fatty
acid me thyl ester byvolume (bio-diesel)
Ac cording toEuropean standard EN 16942 you
can /nd the compatibility indications at thefo l-
lowing locations:
R Ontheve hicle on the information label on the
fuel /ller 0ap (/ page 175) 366 366
Te
ch nical data

Engine oils
for one-time /lling only in exceptional
cases:
R P Pe
etr
tr ol engines:
ol engines:
- MB-F reigabe or MB-Appr oval 229.31
AC EA C3
R Diesel engines:
Diesel engines:
- E 400 d 4MA
E 400 d 4MA TIC:
TIC:MB-F reigabe or MB-
Appro val 229.51 ACEA C3
- Allot
All other models:
her models: ACEA C3
The following values referto an oil change, includ-
ing the oil /lter.
Engine oil
Engine oil /lling
/llingcapacity
capacity Model
Model
Capacity
Capacity
E 200 4MATIC 6.0 litres
E 220 d
E 220 d 4MATIC 6.3 litres
E 300 d 4MATIC 6.5 litres
E 400 d 4MATIC 7.5 litres Model Model
Capacity
Capacity
E 450 4MATIC 8.5 litres
All other model s6 .6 litres N
No
ot
tes on br
es on br ak
ake
e 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 363). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop. Only use a brake 0uid appr
ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant Coolant
N No
ot tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 363). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. 370
370
Te
ch nical data

*
N
N O
OTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection.
Information on coolant is available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1
- Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N NOOTE
TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the cooling
system is not su1ciently pr otected against
ov erheating and cor rosion at high outside
te mp eratures. #
Only use coolant appr ovedfor
Mercedes-Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the cool-
ing system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C)
R A maximum of 55% (antif reeze pr otection
down to-45°C) N
No
ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 363). &
W
WARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. *
N NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly. Te
ch nical data
371
371

Displa
Displa
y messag
y messag es
es Intr
Intr
oduction
oduction Inf
Inf
or
ormation about displa
mation about displa y messag
y messages
es
Display messages appear on the inst rument dis-
pla y.
Display messages with graphic symbols are sim-
pli/ed in the Owner's Manual and may di.er from
th e symbols on the inst rument displa y.The instru-
ment display sh ows high-priority display messages
in red. Cer tain display message s are accompa-
nied byawa rning tone.
Please act in accordance with the display mes-
sages and follow the additional no tes in the Own-
er's Manual.
Fo r some display messages, symbols will also be
shown:
R Õ Further information
R ¨ Hide displ aymessage
Wi th th e leT-hand Touch Control, you can select
th ere specti vesymbol byswiping tothe leT or
ri ght. Pressing Õdispla ysfur ther information on th
e media displa y.Press the¨ symbol tohide
th e display message.
Yo u can hide lo w-priority display messages by
pressing the back button Gorthe leT-hand
To uch Control. The display message s willthen be
stored in the message memor y.
Re ctify the cause of a display message as quickly
as possible.
High-priority display message s cannotbe hidden.
The instrument display will show these display
messages permanently until the cause of the dis-
play message has been recti/ed.
Calling up sav
Calling up sav ed displa ed display messag
y messag es
es
On-board computer:
4 Service 5
1 message
If th ere are no display messages, No messages
will appear on the inst rument displa y. #
Scroll thro ugh the display messages byswip-
ing upwards or down wards on the leT-hand
To uch Control. #
T
To e
o e xit t
xit t he messag
he messag e memory
e memory:
:press the back
button G. Display messages and
warning/indicator lamps
375
375