warning light MERCEDES-BENZ E-CLASS COUPE 2022 Owner's Manual

The hazard
warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is braked heavily from a speed of
more than 70 km/h toa standstill.
When you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using button 1.A A
dap
dap tiv
tive functions, MUL
e functions, MUL TIBEAM LED
TIBEAM LEDInt
Int
ellig
ellig ent Light Syst
ent Light Syst em function
em function
The MULTIBEAM LED headlamp s adapttothe
driving and weather situation and pr ovide exten-
ded functions for impr oved illumination of the
ro ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 132)
R Cornering light (/ page 132)
R Motorw ay mode (/ page 133)
R Enhanced fog light function (/ page 133)R
Bad weather light (/ page 133)
R City lighting (/ page 133)
The system is active only when it is dar k.
A
A ctiv
ctiv e headlam
e headlamps function ps function R
The headlamps follow the steering mo ve-
ments.
R Releva nt areas are better illumina ted during a
journe y.
The functions are active when the low beam is
switched on.
Depending on theve hicle's equipment, the course
of the lane in which you are driving will also be ev
aluated and the active headlamps function will
adjust the light in advance.
Cor
Cor ner nering light function
ing light function The cornering light impr
ovesth e illumination of
th e car riag ewa yove r a wide angle in the turning
direction, enabling better visibility on tight bends,
fo rex ample. The cornering light can be activated
only when the low beam is switched on.
The function is active in thefo llowing cases:
R Atspeeds below 40 km/h when the turn sig-
nal light is switched on or the steering wheel
is turned 132
132
Light and sight

Multimedia system:
4 © 5
Settings 5
Lights
5 Intelligent Light System #
Switch the function on or o.. A
A
dap
dap tiv
tive Highbeam Assist
e Highbeam Assist A A
dap dap tiv
tive Highbeam Assis
e Highbeam Assist function t function&
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist
Ad aptive Highbeam Assist does not react to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist may failto recognise other road users
with their own lighting, or may recognise them
to o late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be activated despite
the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist is only an aid. You are
re sponsible for adjusting theve hicle's lighting to
th e pr evailing light, visibility and tra1c conditions. Ad
aptive Highbeam Assist automatically switches
between thefo llowing types of light:
R Low beam
R High beam
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.134 134
Light and sight

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R In poor visibility, e.g. fog, heavy rain or snow
R Ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. Light and sight
135 135

W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Intermittent wiping, normal
3 Å Intermittent wiping, frequent 4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wipes with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 312). R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press and hold the
î button on the combination switch for
appr oximately thre e seconds (/ page 139).
The wiper arms will mo veinto there placement
position.
R R emo emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the wind-
screen. Light and sight
139
139

#
T
To r
o r emov
emov e t
e the wiper blade:
he wiper blade: pressrelease knob
2, pull the wiper blade in the direction of
ar ro w 3 and remo ve.
F
F itting t
itting t he wiper blades
he wiper blades #
Push the new wiper blade onto the wiper arm
in the direction of ar row 1 until release knob
2 engages. #
Press the wiper blade be yond the point of
re sis tance in the direction of ar row 3 onthe
wiper arm.
The wiper blade will engage with a noticeable
click and mo vefreely again. #
Foldthe wiper arm back onto the windscreen. #
Switch on theve hicle. #
Press but tonî onthe combination switch
(/ page 139).
The wiper arms will return totheir original
positions.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Mirr Mirr
ors
ors Oper
Oper
ating t
ating t he outside mirr
he outside mirr ors
ors &
W
WARNING
ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. 142
142
Light and sight

&
W
W ARNI NG
ARNI NGRisk of accident due tomis-
judgement of distance when using the
outside mir ror
The outside mir rors re0ect objects on a
smaller scale. The objects in vi eware in fact
closer than they appear. #
Therefore, alw ays look overyo ur shoul-
der in order toensure that you are aware
of the actual distance between you and
th ero ad users driving behind you. F
F
olding t
olding t he outside mirr
he outside mirr or
ors in/out
s in/out #
Brie0y press button 1.
R
R ese
ese tting t
tting t he outside mirr
he outside mirr ors
ors
% Ifth e battery has been disconnected or com-
ple tely dischar ged, the outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproper ly. #
Brie0y press but ton1. A
A
djus
djusting t ting t he outside mirr
he outside mirr ors
ors #
Press button 3or4 toselect the outside
mir rorto be adjus ted. #
Press button 2toadjust the position of the
mir ror glass.
Eng
Eng aging t
aging t he outside mirr
he outside mirr ors
ors #
Vehicles without elect rically folding outside
mir rors: manually mo vethe outside mir ror into
th e cor rect position. #
Vehicles with elect rically folding outside mir-
ro rs: press and hold button 1.
Yo u will hear a click and the mir ror will audibly
click into place. The outside mir ror will now be
set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. Light and sight
143
143

#
T
To switc
o switc h on t
h on the pow
he pow er supply
er supply :
:press button
1 once.
Yo u can, forex ample, switch on the wind-
screen wiper.
The po wer supply is switched o. again if thefo l-
lowing conditions are met:
R you open the driver's door.
R you press button 1twice more. #
T
To switc
o switc h on t
h on the v
he vehicle:
ehicle: press button 1
twice.
Indicator and warning lamps light up on the
inst rument clus ter.
The vehicle is switched o. again if one of thefo l-
lowing conditions is met:
R you do not start theve hicle within 15 minutes
and the transmission is in position jorthe
electric parking brake is applied.
R you press button 1once. S S
t
tar
ar ting t
ting t he v
he vehicle
ehicle S
S
t
tar
ar ting t
ting t he v
he vehicle wit
ehicle wit h t
h the st
he st ar
art/st
t/st op butt
op butt on
on &
D
DAN
AN GER
GER Risk of fatal injuries due to
ex haust gases
Combustion engines emit poisonous exhaust
ga ses such as carbon monoxide. Breathing in
th ese exhaust gases is hazardous tohealth
and results in poisoning. #
Never lea vethe engine and, if present,
th e stationary heater, running in an
enclosed space without su1cient venti-
lation. &
W
WARNI NG
ARNI NGRisk of /re due to0ammable
material in the engine compartment or the
ex haust system
Flammable materials may ignite. #
Therefore, check regula rly th at there are
no 0ammable materials in the engine
compartment or on theex haust system. R
R
eq
eq uir
uir ements:
ements:
R theke y is in theve hicle and is recognised. #
ShiT the transmission toposition jori. #
Depress the brake pedal and press button 1
once. #
Ifth eve hicle does not start: switch o. non-
essential consumers and press but ton1
once. #
Ifth eve hicle still does not start and thePlace
the key in the marked space See Owner's
Manual display message appears on the
inst rument displa y: starttheve hicle with the
ke y in the mar ked space (emer gency ope ra-
tion mode) (/ page 159).
% You can switch o. theve hicle while driving. To
do this, press button 1for about thre e sec-
onds or press button 1thre e times within
th re e seconds. Be sure toobser vethe saf ety
no tes conce rning this under "Driving tips"
(/ page 162).
Obser veany information rega rding display mes-
sages that may be displ ayed on the inst rument
displa y. 158 158
Driving and parking

R
It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
S
S t
tar
ar ting t
ting t he v
he vehicle (R
ehicle (R emot
emot e Online)
e Online) &
W
WARNING
ARNING Risk of crushing or entrapment
due tounintentional starting of the engine
Limbs could be crushed or trapped if the
engine is star ted unintentionally during service
or maintenance work. #
Always secure the engine against unin-
te ntional starting before ca rrying out
main tenance or repair work. R
R
eq
eq uir
uir ements:
ements:
R Park position jis selected.
R The anti-theT alarm system is not activated.
R The hazard warning light system is switched
o..
R The bonnet is closed.
R The doors are closed and loc ked.
R The windo wsand sliding sunroof are closed. #
Start theve hicle using the smartphone.
ATer every engine start, the engine runs for
te n minutes.
Yo u can car ryout a maximum of two consecutive
starting attem pts. You must start the engine with
th eke y before trying tostart theve hicle again
with the smartphone.
Yo u can switch o. theve hicle at any time as fol-
lo ws:
R Viath e Smartphone App
R By pressing theÜ orß button on the
key
% Further information can be found in the
smartphone app.
Secur
Secur ing t
ing the v
he vehicle ag
ehicle ag ains
ainst st
t star
arting bef
ting bef or
ore car ry-
e car ry-
ing out maint
ing out maint enance or r
enance or repair w
epair w or
ork:
k: #
Switch on the hazard warning light system.
or #
Unlock the doors.
or #
Open a side window or the sliding sunroof. R
R
unning-in not
unning-in not es
es To
preser vethe engine during the /rst 1,500 km:
R Drive at varying road speeds and engine
speeds.
R Do not drive at speeds greater than
140 km/h.
R Drive theve hicle in drive prog ram A
or ;.
R ShiT tothe next highest gear at theve ry latest
when the needle reaches the last third before
th ere d area in there v counter.
R Do not shiT down manual lyin order tobrake.
R Avoid overstraining theve hicle, e.g. driving at
full thro ttle.
R Do not depress the accelerator pedal past the
pressure point (kickdown).
R Only increase the engine speed gradually and
accelerate theve hicle tofull speed aTer
1,500 km.
This also applies when the engine or parts of the
driv etra in ha vebeen replaced. 160
160
Driving and parking

R
V
Vehicles wit
ehicles wit h a 48 V on-boar
h a 48 V on-boar d electr
d electrical sy
ical sys-
s-
t
t em:
em:
- Youre lease the brake pedal on a downhill
gr adient and theve hicle does not roll.
- The vehicle rolls on a downhill gradient and
does not automatically enter glide mode at
20 km/h.
ECO start/stop function symbols in the inst ru-
ment displa y:
R The symbol è(gre en) appears when the
ve hicle is at a standstill: The engine was
switched o. bythe ECO start/s top function.
R The symbol ç(yellow) appears when the
ve hicle is at a standstill: Not all vehicle condi-
tions for an engine stop ha vebeen met.
R Neither the symbol ènorç appears
when theve hicle is at a standstill: An intelli-
ge nt stop inhibitor was de tected, e.g. a stop
sign.
R The symbol sappears: The ECO start/
stop function is deactivated or there is a mal-
function. If
th e engine was switched o. bythe ECO start/
stop function and you lea vetheve hicle, a warning
to ne sounds and the engine is not restar ted. In
addition, thefo llowing display message appears in
th e inst rument displa y:
Vehicle is operational Switch off ignition before
exiting
If yo u do not switch o. theve hicle, it is automati-
cally switched o. aTer thre e minutes. Deactiv Deactiv
ating or activ
ating or activ ating t
ating the EC
he ECO st
O star
art/st
t/st op
op
function
function #
Press button 1.
If indicator lamp 2lights up, the ECO start/
stop function is activated.
% Depending on the model and theve hicle
equipment, the button may also be located at
a di.erent position in the centre console. 166
166
Driving and parking

R
The road's course is suitable, e.g. no steep
uphill or downhill inclines or tight bends.
R There is no trailer hitched up tothe trailer
hitch, and no bicycle rack /tted.
R You do not depress the accelerator or brake
pedal (e xcept for light brake applications).
% Glide mode can also be activated if you ha ve
selected the "Eco" setting forth e drive in the
drive prog ram =.
Glide mode is deactivated again if one of the con-
ditions is no longer met.
Glide mode can also be pr evented bythefo llowing
parame ters:
R Incline
R Downhill gradient
R Temp erature
R Height
R Speed
R Operating status of the engine
R Tra1c situation F F
unction of t
unction of t he 4MA
he 4MATIC
TIC
4MATIC ensu resth at all four wheels are driven.
To get her with ESP ®
and 4ETS, 4MATIC impr oves
th e traction of your vehicle whene ver a driven
wheel spins due toinsu1cient traction.
If yo ufa ilto adapt your driving style, 4MATIC can
neither reduce therisk of an accident nor override
th e la wsof ph ysics. 4MATIC cannot take account
of road, weather and tra1c conditions. 4MATIC is
only an aid. You are responsible especially for
maintaining a safe distance from theve hicle in
front, forve hicle speed, for braking in good time
and for st aying in lane.
% In wintry road conditions, the maximum e.ect
of 4MATIC can be achie ved only if you use
winter tyres (M+S tyres), with snow chains if
necessar y. R
R
efuelling
efuelling R
R
efuelling t
efuelling t he v
he vehicle
ehicle &
W
WARNING
ARNING Risk of /re or explosion from
fuel
Fu els are highly 0ammable. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Before refuelling, switch o. theve hicle
and, if /tted, the stationary heater and
ke ep switched o. during /lling. &
W
WARNING
ARNING Risk of injury from fuels
Fu els are poisonous and hazardous toyour
health. #
Do not swallow fuel or let it come into
contact with skin, eyes or clo thing. #
Do not inhale fuel vapour. #
Keep children away from fuel. #
Keep doors and windo wsclosed during
th ere fuelling process. Driving and pa
rking
175 175