ECU MERCEDES-BENZ E-CLASS COUPE 2022 Manual PDF

#
Do not exceed the maximum permissible
speed of 60 km/h when transporting. *
N
NOOTE
TE Damage totheve hicle from secur-
ing it inco rrectly #
ATer loading, theve hicle must be
secured on all four wheels. Otherwise,
th eve hicle could be damaged. #
A minimum dis tance of 20 cm upwards
and 10 cm down wards must be kept to
th e transport platform. #
Secure theve hicle on all four wheels aTer
loading. 4MA
4MA
TIC v
TIC v ehicles/v
ehicles/v ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ans-
ans-
mission
mission #
Make sure that the front and rear axles come
to rest on the same transpor tation vehicle.
* N
NOOTE
TE Damage tothe drive train due to
incor rect positioning of theve hicle #
Do not position theve hicle abo vethe
connection point of the transport vehi-
cle. T
T
o
o wing eye
wing eye To
wing eye1 is attached tothe edge of the boot
under the boot 0oor. 336
336
Breakdown assistance

This could
result in a /re. #
Alwaysre place faulty fuses with speci-
/ed new fuses containing the cor rect
amperage. *
N
NOOTE
TE Damage due toincor rect fuses Using incor
rect fuses can result in damage to
electrical components or systems or their
functions being considerably restric ted. #
Use only fuses appr ovedfo r Mercedes-
Benz with there specti vespeci/ed fuse
ra ting. Blown fuses must be
replaced with fuses of the
same rating, whi chyou can recognise bythe col-
our and the label. The fuse ratings and fur ther
information tobe obser ved can be found in the
fuse assignment dia gram.
F
F use assignment diagr
use assignment diagr am:
am:onthe fuse box in the
boot (/ page 340). *
N
NOOTE
TE Damage or malfunctions caused by
moisture Moisture may cause damage
tothe electrical
system or cause it tomalfunction. #
When the fuse box is open, make sure
th at no moisture can enter the fuse box. #
When closing the fuse box, make sure
th at the seal of the lid is positioned cor-
re ctly on the fuse box. If
th e ne wlyinser ted fuse also blo ws, ha vethe
cause traced and recti/ed at a quali/ed specialist
wo rkshop.
Ensure thefo llowing before replacing a fuse:
R The vehicle is secured against rolling away.
R All electrical consume rsare switched o..
R The vehicle is switched o..
The elect rical fuses are located in various fuse
bo xes:
R Fuse box in the engine compartment on the
driver's side (/ page 338) R
Fuse box on the driver's side of the cockpit
(/ page 339)
R Fuse box in the front passenger foot we ll
(/ page 339)
R Fuse box in the boot on theright-hand side of
th eve hicle, when vie wed in the direction of
tr ave l (/ page 340) Opening and closing t
Opening and closing t
he fuse bo
he fuse box in t
x in the engine
he engine
com
com par
partment
tment R
R
eq
eq uir
uir ements:
ements:
R A dry clo thand a scr ewdriver are available.
Obser vethe no tes on elect rical fuses
(/ page 337).
Opening
Opening &
W
WARNING
ARNING Risk of injury from using the
windscreen wipers when the bonnet is
open
If th e windscreen wipers start moving when
th e bonnet is open, you could be trapped by
th e wiper linkage. 338
338
Breakdown assistance

shop. The new wheel must ha
vethe cor-
re ct dimensions. %
The emer gency spa rewheel is secured in the
emer gency spa rewheel bag in the boot.
Obser vethefo llowing no tes on /tting an emer-
ge ncy spa rewheel:
R The maximum permissible speed with an
emer gency spa rewheel /tted is 80 km/h.
R Do not /t the emer gency spa rewheel with
snow chains.
R Replace the emer gency spa rewheel aTer six
ye ars at the latest, rega rdless of wear.
R Use the wheel bolts that are included with the
emer gency spa rewheel.
R Check the tyre pressure of the emer gency
spa rewheel /tted. Cor rect the pressure as
necessar y.
% The speci/ed tyre pressure is stated on the
label of the emer gency spa rewheel.
% V
V ehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e loss w
e loss w ar
arning
ning
syst
syst em:
em: if an emer gency spa rewheel is /tted,
th e tyre pressure loss warning system cannot function
reliabl y.Only restart the system
again when the emer gency spa rewheel has
been replaced with a new wheel.
V
V ehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: if an emer gency spa rewheel is /tted, the
tyre pressure monitoring system cannot func-
tion reliabl y.Fo r a few minutes aTer an emer-
ge ncy spa rewheel is /tted, the system may
still display the tyre pressure of there mo ved
wheel. Only restart the system again when the
emer gency spa rewheel has been replaced
with a new wheel.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 342)
R Tyre pressure table (/ page 343)
R Notes on /tting tyres (/ page 346)
R Fitting an emer gency spa rewheel
(/ page 351) Wheels and tyres
357 357

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions &
W
WARNING
ARNING Risk of injury or death when using a child restraint system while the front passenger airbag is ena-
bled
If yo u secure a child in a child restraint system on the front passenger seat and the front passenger airbag is ena-
bled, the front passenger airbag can deploy in theev ent of an accident.
The child could be struck bythe airbag. #
Ensure, bo thbefore and during the journe y,that the status of the front passenger airbag is cor rect.
NEVER use a rear wa rdfacing child restraint on a seat pro tected byan ACTIVE AIRBAG in front of it, DEATH or
SERIOUS INJURY tothe CHILD can occur. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Make sure that no objects are trapped under the front passenger seat. #
Check the status of automatic front passenger airbag actuation (/ page 51).#
If necessar y,consult a quali/ed specialist workshop immediatel y.
PRE-SAFE inoperative See
Owner's Manual *
The PRE‑SAFE ®
functions are malfunctioning. #
Consult a quali/ed specialis two rkshop. 378 378
Displ
aymessages and warning/indicator lamps

V
V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
d
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Check trailer hitch
lock (white display message) *T
he trailer hitch is not operational during a jou rney with a trailer. &
W WARNING
ARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Uncouple the trailer and secure it against rolling away. #
Initiate a new swivelling procedu reand do not re-couple the trailer until the display message disappears. #
Initiate a new swivel mo vement (/ page 245). #
When the display message disappears, couple up the trailer and drive on.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. 386
386
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Do not couple up the trailer. Drive on without the trailer. No tethere duced ground clearance due tothe unloc ked
ball nec k. #
Consult a quali/ed specialist workshop.
*W hen theve hicle is stationary with a coupled trailer, the trailer hitch is not operational. #
Uncouple the coupled trailer and secure it against rolling away. #
If t If the ball nec he ball nec k has been f
k has been f olded in:
olded in:unlockthe ball neck (/ page 245). #
Swivel the ball neck into the end position manually and let it engage. #
If t
If the ball nec
he ball nec k has been f
k has been f olded out
olded out::unlock the ball neck (/ page 245). #
Swivel the ball neck beneath the bumper manually and let it engage.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. #
Do not couple up the trailer. Drive on without the trailer. No tethere duced ground clearance due tothe unloc ked
ball nec k. #
Consult a quali/ed specialist workshop.
Head-up display currently
unavailable See Owner's
Manual *T
he head-up displ ayistemp orarily una vailable. Possible causes:
R malfunctions in the po wer supply
R signal inter fere nce #
Stop in accordance with the tra1c conditions and switch theve hicle o. and on again. #
Ifth e display message still appears, consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
387 387

Br
Br
ak
ak es
es Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
!
Parking brake See Owner's
Manual *T
heyellow ! indicator lamp is lit. The electric parking brake is malfunctioning.
T
T o apply o apply :
: #
Switch theve hicle o. and switch it back on #
App lythe electric parking brake manually (/ page 186).
If it is not possible toapply the electric parking brake: #
Consult a quali/ed specialist workshop. #
Where necessar y,also secure the par kedve hicle against rolling away.
*T heyellow ! indicator lamp and there d! indicator lamp are lit. The electric parking brake is malfunctioning.
T
T o r
o r elease:
elease: #
Switch theve hicle o. and switch it back on #
Release the electric parking brake manually (/ page 186).
or #
Release the electric parking brake automatically (/ page 185).
If it is still not possible torelease the electric parking brake: #
Do not continue driving. Consult a quali/ed specialist workshop.
*T heyellow ! indicator lamp is lit and there d! indicator lamp is 0ashing. The electric parking brake is malfunc-
tioning. Display messages and
warning/indicator lamps
397
397

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
The electric parking brake could not be applied or released. #
Switch theve hicle o. and switch it back on
T
T o apply
o apply :
: #
Release and then apply the electric parking brake manually (/ page 186).
T
T o r
o r elease:
elease: #
Apply and then release the electric parking brake manuall y.
If it is not possible toapply the electric parking brake or there d! indicator lamp continues to0ash: #
Do not continue driving. Consult a quali/ed specialist workshop. #
Where necessar y,also secure the par kedve hicle against rolling away.
*T heyellow ! indicator lamp is lit and there d! indicator lamp 0ashes for appr oximately ten seconds aTer the
electric parking brake has been applied or released. It then remains lit or goes out. The electric parking brake is mal-
functioning.
If t
If t he st he st at
ate of c
e of c harg
harge is t
e is t oo low
oo low :
: #
Char gethe 12 V batter y.
T
T o apply
o apply :
: #
Switch o. theve hicle.
The elect ric parking brake will be applied automatical ly.398
398
Display message
s andwarning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
If yo u do not wantthe electric parking brake tobe applied, e.g. at an automatic car wash or when theve hicle is being
to we d, lea vetheve hicle switched on. This does not include having theve hicle towe d with there ar axle raised.
If th e electric parking brake is not applied automaticall y: #
Switch theve hicle o. and switch it back on #
Release and then apply the electric parking brake manually (/ page 186).
If it is still not possible toapply the electric parking brake: #
Consult a quali/ed specialist workshop. #
Where necessar y,also secure the par kedve hicle against rolling away.
T
T o r
o r elease:
elease: #
Ifth e conditions for automatic release are ful/lled and the electric parking brake is not released automaticall y,
re lease the electric parking brake manually (/ page 186).
If it is still not possible torelease the electric parking brake: #
Do not continue driving. Consult a quali/ed specialist workshop.
!
Release parking brake *T
hered! indicator lamp is 0ashing.
The electric parking brake is applied while you are driving:
R A condition for automatic release of the electric parking brake has not been ful/lled (/ page 185).
R You are per form ing emer gency braking using the electric parking brake (/ page 186). Display messages and
warning/indicator lamps
399
399

W
W
ar
ar ning/indicat
ning/indicat or lampP
or lam pP ossible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
ï
Tr ailer tow hitch warning
lamp *T
hered trailer hitch warning lamp is lit.
The trailer hitch is not operational. &
W
W ARNING
ARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Uncouple the trailer and secure it against rolling away. #
Initiate a new swivelling procedu reand do not re-couple the trailer until the display message disappears. #
Notethe messages on the instrument displa y.Engine
Engine
W
W
ar
ar ning/indicat
ning/indicat or lampP
or lam pP ossible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
ÿ
Coolant warning lamp (red) *T
he red coolant warning lamp is lit while the engine is running.
Po ssible causes:
R The temp erature sensor is malfunctioning
R The coolant le vel is too low
R The air supply tothera diator is obstructed
R The radiator fan is faulty 436
436
Display message
s andwarning/indicator lamps