seats MERCEDES-BENZ E-CLASS ESTATE 2020 Service Manual

Ad
justing the angle of the rear seat backr‐
ests (cargo position)
To enlar gethe load compartment, you can adjust
th e seat backrests so that they are ten degrees
st eeper (cargo position). #
Foldthe seat backrest forw ards
(/ page 118). #
Movebrac ket1 inthe direction of the
ar row. #
Push seat backrest 2back tobrac ket1
until the backrest engages. Load compartment co
ver with partition net
(combined ca rgo co ver and net) Note
s onthe load compa rtment co ver &
WARNING Risk of inju ryor death due to
poorly secured objects
The load compartment co ver alone cannot
secure or restra in heavy objects, items of
luggage or heavy loads.
Yo u could be hit byan unsecured load, par‐
ticular lyin theev ent of abrupt changes in
direction, sudden braking or an accident. #
Alw aysstow objects in such a wayth at
th ey cannot be thro wn around. #
Secure objects, luggage or loads
against slipping or tipping over,e.g. by using lashing material,
even if you are
using the load compartment co ver. *
NO
TEDama getothe load compartment
co ver when loading theve hicle The load compartment co
ver may be dam‐
aged when theve hicle is being loaded. #
Do not place any objects abo vethe
lo we r edge of the side windo wsor on
th e load compartment co ver. The load compartment co
ver and the partition‐
ing net form the combined luggage co ver and
net.
When the load compartment co ver is clipped in,
no objects in the load compartment should
obstruct the lo wering mo vement of the co ver
when theta ilgate is closed. The load compart‐
ment co ver will otherwise be raised again auto‐
matically. Seats and
stowing 121

Extending/r
etra cting the load compa rtment
co ver #
Toextend: pull load compartment co ver1
back byhandle 2and clip it into the brack‐
et s on the left and right.
The load compartment co verra ises automat‐
ically when theta ilgate is opened and lo wers
again when theta ilgate is closed.
Re tracting #
Remo veload compartment co ver1 from
th e brac kets on the left and right. #
Guide load compartment co ver1 forw ards
by handle 2until it is fully retracted. The handle
strip of there tracted load compa rt‐
ment co ver1 can be used in thefo llowing posi‐
tions: 1
Folded up by45° (loading position)
2 Horizontal position (driving position)
3 Folded down and loc ked in place (rattle-free
position when driving)
Installing/removing the combined luggage
co ver and net
Requ irements:
R The load compartment co ver and partition
net are retracted. Re
moving
Re mo vethe combined luggage co ver and net
from the load compartment, or from the left-
hand rear door if the seat backrests are folded
fo rw ards. #
Press button 2. #
Foldthe combined luggage co ver and net
backwards with the seat backrest folded up. 12 2
Seats and stowing

#
First, de tach th e combined luggage co ver
and net from left-hand cat ch1 and then
re mo veit from right-hand brac ket4.
In stalling #
Slide the combined luggage co ver and net
into right-hand brac ket4 asfar as it will go. #
Place the combined luggage co ver and net
into the left-hand brac ket and slide it into
catch 1until the combined luggage co ver
and net engages audibl y.
Re d lock verification indicator 3must no
longer be visible.
At taching the combined luggage co ver and
net tothere ar seat backrest
* NO
TEDama getothe combined luggage
co ver and net when attaching it tothe
seat backrest When
the combined luggage co ver and net is
attached tothe seat backrest, it may be
damaged when the seat backrest is folded
bac k. #
Do not fold the seat backrests bac k. Re
quirements:
R The seat backrests are folded forw ards. #
Insert combined luggage co ver and net 2
into bo thguides 1and push it as far as it
will go in the direction of the ar row.
To disassemble the combined luggage co ver and
net, follow the instructions in reve rse order. At
taching the pa rtitioning net &
WARNING Risk of inju ryor death due to
poorly secured objects
The partitioning net alone cann otsecure or
re stra in heavy objects, items of luggage or
heavy loads.
Yo u could be hit byan unsecured load, par‐
ticular lyin theev ent of abrupt changes in
direction, sudden braking or an accident. #
Alw aysstow objects in such a wayth at
th ey cannot be thro wn around. #
Secure objects, luggage or loads
against slipping or tipping over,e.g. by
using lashing material, even if you are
using the partitioning net. Fo
r saf etyre asons, alw ays use a partitioning net
when transporting a load.
Damaged partitioning nets can no longer fulfil
th eir pr otective functions and must be replaced.
Vi sit a qualified specialist workshop. Seats and
stowing 12 3

Pa
rtitioning net without load compartment
enlar gement #
Pull the partitioning net far out towa rdsthe
re ar from there ar ben chseat using tab1. #
Hook the partitioning net into eyelets 2,
fi rs t on the left, then on theright. Pa
rtitioning net with load compartment
enlar gement #
Guide the partitioning net upwards using tab
1 . #
Hook the partitioning net into eyelets 2. Overview of
the tie-down eyes Obser
vethe no tes on loading theve hicle
(/ page 115). 1
Tie-down eyes 124
Seats and stowing

Overview of bag hooks
&
WARNING Risk of inju rywhen using bag
hooks with heavy objects
The bag hooks cannot restra in heavy objects
or items of luggage.
Objects or items of luggage may be flung
around and hit vehicle occupants. #
Only hang light objects on the bag
hooks. #
Never hang hard, sharp-edged or fragile
objects on the bag hooks. Obser
vethe no tes on loading theve hicle
(/ page 115).
Subject the bag hooks toa maximum load of
3 kg and do not attach any goods tothem. 1
Bag hook At
taching the luggage net &
WARNING Risk of inju rydue toobjects
being stowed incor rectly
If objects in theve hicle interior are stowed
incor rectly, they can slide or be thrown around and hit
vehicle occupants. In addi‐
tion, cup holders, open stowage spaces and
mobile phone brac kets cann otalw aysre tain
all objects they contain.
The reis a risk of injur y,particularly in the
ev ent of braking manoeuvres or abrupt
ch anges in direction. #
Alw aysstow objects so that they can‐
not be throw n around in su chsitua‐
tions. #
Alw ays make sure that objects do not
pr otru de from stowage spaces, luggage
nets or stowage nets. #
Close the loc kable stow age spaces
before starting a journe y. #
Stow and secure objects that are heavy,
hard, poin ted, sharp-edged, fragile or
to o lar geinthe load compartment. Obser
vethe no tes on loading theve hicle.
The luggage net is available for all vehicles
exc ept hybrid vehicles. Seats and
stowing 12 5

#
Vehicles with a load compartment pac kage:
inse rtthe brac kets wi th the tie-down eyes
into the load rails (/ page126). #
Fold up the tie-down eyes. #
Hook luggage net 1into the front and rear
tie-down eyes. EAS
Y-PA CK load-securing kit Note
s onthe EAS Y-PA CK load-securing kit
The EA SY-PAC K load-securing kit allows youto
use your load co mpartment for a variet y of pur‐
poses. The co mponents are located in thestow‐
age space under the load compartment floor. 1
Bag containing the brac kets and luggage
holder
2 Telescopic rod Inserting
the brac kets in tothe load rail #
Insert brac ket1 into the cent reof load rail
5. #
Press release knob 3and slide brac ket1
into the desired position in load rail5. #
Let go of release knob 3. 12 6
Seats and stowing

#
Press locking button 4.
The brac ket1 has been secured in the
selected position in the load rail5. #
If necessar y,fold tie-down eye2 upwards.
Installing or removing the lug gage holder
Re quirements:
R Select a load size that can be secured bythe
luggage holder.
The luggage holder is used tosecure loads
against the side wall of the load compartment to
pr ev ent them from moving around.
Yo u can subject the load holder toa maximum
load of 7 kg. #
Insert two brac kets 5 into the load rail
(/ page 126). #
Press and hold there lease knob 1onthe
luggage holder 2. #
Pull the belt on the handle out slightl y. #
Let go of release knob 1. Fi
tting #
Press and hold there lease knob 3ofthe
fi rs t brac ket5. #
Inse rtthe luggage holder 2into thefirst
brac ket5 and slide it down wards until it
engages. #
Let go of release knob 3. #
Repeat the process with the second brac ket
5 and the handle.
Loading #
Press and hold there lease knob 1onthe
luggage holder 2. #
Pull the belt on the handle out. #
Place the load between thest ra p and the
load compartment side wall. #
Press and hold there lease knob 1onthe
luggage holder 2. #
Hold the belt on the handle firm lyand slowly
guide it back until the load has been
secured. #
Let go of release knob 1. Seats and
stowing 127

#
On bo thbrac kets 5, press the locking but‐
to n4. #
Toremo ve:press release knob 3onthe
brac ket5 and remo veluggage holder 2by
pulling it out.
Installing or removing the telescopic rod
Fi tting
The telescopic rod is used tosecure loads
against there ar seats topreve ntthem from
moving around. #
Insert one brac ket2 into bo th the left and
ri ght load rails and slide it tothe desired
position. #
Press and hold there lease knob 3. #
Insert thete lescopic rod1 into the brack‐
et s2 and slide it down wards until it
engages. #
On bo thbrac kets, press lo cking button 4. #
Toremo ve: press there lease knob 3on
th ere spective brac ket2 and remo vethe
te lescopic rod1 bypulling it upwards and
out. At
taching a roof luggage rack &
WARNING Risk of accident due to
exc eeding the maximum roof load
The vehicle centre of gravity and the usual
driving characteristics as well as thesteering
and braking characteristics alter.
If yo uexc eed the maximum roof load, the
driving characteristics, as well as steering
and braking, will be greatly impaired. #
Neverexc eed the maximum roof load
and adjust your driving style. Yo
u will find information on the maximum roof
load in the "Technical data" section. 12 8
Seats and stowing

*
NO
TEVehicle damage from non-
appr ovedro of luggage racks The
vehicle could be damaged byroof lug‐
ga ge rack sth at ha venot been tested and
appr ovedfo r Mercedes-Benz. #
Use only roof luggage rack ste sted and
appr ovedfo r Mercedes-Benz. #
Depending on theve hicle equipment,
ensure that the sliding sunroof can be
fully raised when thero of luggage rack
is fitted. #
Depending on theve hicle equipment,
ensure that theta ilgate can be fully
opened when thero of luggage rack is
fi tted. #
Position the load on thero of luggage
ra ck in such a wayth at theve hicle will
not sus tain damage even when it is in
motion. *
NO
TEDama getothe panorama sliding
sunroof due tonon-app rove dro of lug‐
ga ge racks The panorama sliding sunroof may be dam‐
aged bythero of luggage rack ifyo u attem pt
to open it when using a roof luggage rack not
te sted and appr ovedfo r Mercedes-Benz. #
When a roof luggage rack isfitted, open
th e panorama sliding sunroof only if this
has been tested and appr oved for
Mercedes-Benz.
The panorama sliding sunroof may be raised
to allow ventilation of theve hicle interior. #
Secure thero of luggage rack tothero of rail‐
ing. #
Obser vethe manufacturer's ins tallation
instructions. Soc
kets Using the
12V so cket Re
quirements: R
Only connect devices up toa maximum of
18 0 W (15 A).
Depending on theve hicle equipment, theve hicle
has thefo llowing 12V soc kets:
R Inthestow age compartment in the front
cent reconsole
R Inthestow age compartment in the cent re
console of there ar passenger compartment
R Inthe load compartment Example:
12V soc ket in thestow age compartment
in the front cent reconsole Seats and
stowing 12 9

#
Brief lypress the trim element of the co ver on
th e front.
The co ver opens in the direction of the ar row. #
Lift up cap 1ofthe soc ket and insert the
plug of the device.
If yo u ha veconnected a device tothe12 V
soc ket, le ave the co ver of thestow age compart‐
ment open. USB port in
there ar passenger comp artmentYo
u can charge a USB device, such as a mobile
phone, at the USB ports using a suitable charg‐
ing cable.
The devices can be charge d with 5 V (up to3 A)
and when the ignition is switched on. Wire
lesscharging of the mobile phone and
connection with theex terior aerial Note
s on wirelessly charging the mobile
phone &
WARNING Risk of inju rydue toobjects
being stowed incor rectly
If objects in theve hicle interior are stowed
incor rectly, they can slide or be thrown
around and hit vehicle occupants. In addi‐
tion, cup holders, open stowage spaces and
mobile phone recep tacles cannot al ways
re tain all objects within.
There is a risk of injur y,particularly in the
ev ent of sudden braking or a sudden change
in direction. #
Alw aysstow objects so that they can‐
not be throw n around in su chsitua‐
tions. #
Alw ays make sure that objects do not
pr otru de from stowage spaces, luggage
nets or stowage nets. #
Close the loc kable stow age spaces
before starting a journe y. #
Alw aysstow and secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe no tes on loading theve hicle. &
WARNING Risk offire from placing
objects in the mobile phone stowage
compartment
Placing other objects in the mobile phone
stow age compartment could con stitute a fire
hazard. #
Apart from a mobile phone, do not
place any other objects in the mobile
phone stowage compartment, espe‐
cially those made of me tal. 13 0
Seats and stowing