boot MERCEDES-BENZ E-CLASS ESTATE 2021 Owners Manual

Size class –
Size class –
Eq Eq
uipment
uipment LeT/r
LeT/r
ight
ightr
rear seat
ear seat
B1 – ISO/F2X IUF
A – ISO/F3 IUF IL Suitable for ISOFIX child restraint systems acco rding totheta ble
in "Overview of there commended child restraint systems", or if the
ve hicle and the seat are listed on thech ild restraint system manu-
fa cturer's vehicle model list.
IUF Suitable forfo rw ard-facing ISOFIX child restraint systems of the
"Universal" category in this we ight group.
(1) When using a child restraint system of size class (ISO/R3),
mo vethe front seat into the highest position. Make sure thatth e
seat backrest of the front seat does not rest against thech ild
re straint system. Ov Ov
er
ervie
vie w of suit
w of suit ability of t
ability of t he seats f
he seats f or att
or attac
aching
hing
i‑Size c
i‑Size c hild r
hild res
estrtraint syst
aint syst ems
ems
i‑Size is a standardised securing system for spe-
cially designed child restraint systems.
° The symbol indicates seats suitable for
attaching an i‑Size child restraint system in
acco rdance with UN R129 (/ page 63).
Child restraint systems that are permitted
in accordance with UN R44 as per the ISO-
FIX tables (/ page 65) or UN R129 as per
th efo llowing i‑Size tables may be attached.
i‑Size c
i‑Size c hild r
hild res
estrtraint syst
aint syst ems (ISO/R2, ISO/F2X)
ems (ISO/R2, ISO/F2X) F
F
r
ront passeng
ont passeng er seat
er seatLeT/r
LeT/r ight
ightr
rear seat
ear seat
Xi ‑U
X Not suitable for an i-Size child
re straint system in the "Univer-
sal" categor y. i-U Suitable
forfo rw ard-facing
and rear wa rd-facing i-Size child
re straint systems in the "Univer-
sal" categor y. F
F
itting t
itting t he ISOFIX or i‑Size c
he ISOFIX or i‑Size c hild r
hild res
estrtraint syst
aint syst em
em
on t
on t he
heleT
leT and r
and r ight r
ight r ear seats
ear seats &
W
WARNING
ARNING Risk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion.
R As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th e leT and right seat backrests are not
engaged and loc ked in place, this will be shown
on the display on the inst rument clus ter. 66
66
Occupant saf
ety

Fr
ont passenger airbag disabled 1, 2
U, L
1 Ad just the seat cushion inclination so that the front
edge of the seat cushion is in the highest position and
th ere ar edge of the seat cushion is in thelowe st posi-
tion.
2 The vehicle is equipped with automatic front
passenger airbag shuto.. The PASSENGER AIR BAG
OFF indica tor lamp must be lit.
X Not suitable forch ildren in thisweight categor y.
U Sui table forch ild restraint systems of the "Universal"
category in this we ight categor y.
L Suitable for semi-universal child restraint systems
acco rding totheta ble in "Recommended child restraint
systems", or if theve hicle and the seat are listed in the
ch ild restraint system manufacturer's vehicle model list.
UF Suitable forfo rw ard-facing child restraint systems of
th e "Universal" category in this we ight categor y. Secur
Secur
ing t
ing the c
he child r
hild r es
estrtraint syst
aint syst em wit
em with t
h the seat
he seat
belt on t
belt on t he r
he rear seat
ear seat &
W
WARNING
ARNING Risk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion.
R As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th e leT and right seat backrests are not
engaged and loc ked in place, this will be shown
on the display on the inst rument cluster. If
th e centre seat backrest is not engaged and
loc ked in place, there d lock veri/cation indicator
will be visible.
When When /tting /tting a belt-secur
a belt-secur ed c
ed child r
hild r es
estr
traint sy st
aint syst em,
em,
obse rv
observ e t
e t he f
he f ollo
ollowing:
wing:
O Always comply with the manufacturer's
installation and operating instructions forthe
ch ild restraint system used.
O For a child restraint system in the "Universal"
or "Semi-Universal" categor y,make sure that
th e system has been appr ovedfo rth eve hicle
seat.
Obser vethe no tes under "Suitability of seats
fo r attaching belt-secured child restraint sys-
te ms" (/ page 70).
O When using a w When using a w eight cat
eight categor
egory 0/0+ bab
y 0/0+ bab y
y
car seat and a w
car seat and a w eight cat
eight cat egor
egory I r
y I rearw
earw ar
ard-
d-
f
f acing c
acing c hild r
hild res
estrtraint syst
aint syst em on a r
em on a r ear seat:
ear seat:
adjust the front seat so that the seat does
not touch thech ild restraint system.
O When using a w
When using a w eight cat
eight categor
egory I f
y I forw
orw ar
ard-
d-
f
f acing c
acing c hild r
hild res
estr
traint sy st
aint syst em:
em:remo vethe
head restraint from there spective seat, if
possible. 72
72
Occupant saf
ety

The
tailgate can open or close unintentionally in
th efo llowing situations:
R A person's arms or legs are moving in the sen-
sor de tection range, e.g. when polishing the
ve hicle or picking up objects.
R Objects are mo ved or placed behind theve hi-
cle, e.g. the hose of a fuel dispenser, a charg-
ing cable, or lug gage
R Clamping straps, tarp aulins or other co verings
are pulled overth e bumper.
R A pro tective mat with a leng threaching over
th e boot sill down into the de tection range of
th e sensors is used.
R The pr otective mat is not secured cor rectl y.
R Workis being done on the trailer hitch, trailers
or rear bicycle rack s.
Deactivate the function of theke y (/ page 80) or
do not car rytheke y about your person in such
situations. Limiting t
Limiting t
he opening angle of t
he opening angle of t he t
he tailg
ailgate
ate A A
ctiv ctiv ating t
ating t he opening angle limit
he opening angle limit er
er
Yo u can limit the opening angle of theta ilgate in
th eto p half of its opening range up toa point
shortly before the end position. #
Stop the opening procedure of theta ilgate at
th e desired position. #
Press and hold the closing button on theta il-
ga te until you hear a short acoustic signal.
The opening angle limiter will be activated. The
ta ilgate will then stop in the stored position
when opened.
To open theta ilgate full y,pull the handle on the
outside of theta ilgate again aTer it has stopped
automaticall y.
Deactiv
Deactiv ating t
ating the opening angle limit
he opening angle limit er
er #
Press and hold the closing button on theta il-
ga te until two short acoustic signals sound. U
Unloc
nloc king t
king t he t
he tailg
ailgat
ate wit
e wit h t
h the emerg
he emerg encykey
ency key R R
eq eq uir
uir ements:
ements:
R The rear seat backrest has been folded
fo rw ard.
R The combined lug gage cover and net has been
re mo ved. #
Remo vethe emer gency key (/ page 81). 92
92
Opening and closing

Thr
Through-loading f
ough-loading f eatur
eature in t
e in the r
he rear benc
ear benc h seat
h seat
(EASY
(EASY -PAC
-P AC K Quic
K Quic kf
kfold)
old) F
F
olding t
olding t he r
he rear seat bac
ear seat bac kr
kres
est f t forw
orw ar
ards
ds &
W
WARNI NG
ARNI NGRisk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion.
R As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th e seat backrest is not engaged and loc ked,
th is will be shown on the driver's displa y.
R
R eq
eq uir
uir ements:
ements:
R The rear seat backrest head restraints are ful ly
inser ted.
Yo u can fold the centre and outer seat backrests
fo rw ards separatel y.
The right seat backrest can be folded forw ards
only toget her with the centre seat backrest.
The outer seat backrests are unloc ked electricall y. #
V Vehicles wit ehicles wit hout a memor
hout a memor y function:
y function:movethe
driver's or front passenger seat forw ards, if
necessar y. #
V Vehicles wit ehicles wit h a memor
h a memor y function:
y function: if at least
one section of there ar seat backrest is folded
fo rw ards, the cor responding front seat will
mo veforw ards slightl y,if necessar y,to avo id a
collision. Seats and st
owing
127
127

Example: 12 V soc
ket in the st owage compartment
in the front centre console #
Brie0y press the trim element of the co ver on
th e front.
The co ver opens in the direction of the ar row. #
LiT up cap 1ofthe soc ket and insert the
plug of the device.
If yo u ha veconnected a device tothe 12 V
soc ket, lea vethe co ver of the st owage compart-
ment open. USB por
USB por
t in t
t in the r
he rear passeng
ear passeng er com
er compar
partment
tment Yo
u can charge a USB device, such as a mobile
phone, at the USB ports using a suitable charging
cable.
When theve hicle is switched on, the devices can
be charge d with 5 V (up to3 A). W W
ir
ireless c
eless c har
harging of t
ging of t he mobile phone and con-
he mobile phone and con-
nection wit
nection wit h t
h the e
he e xt
xter
er ior aer
ior aer ial
ial N
No
ot
tes on wir
es on wir elessl
elessly c
y char
har ging t
ging t he mobile phone
he mobile phone &
W
WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cannot alw aysreta in all
objects within.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cann ot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe no tes on loading theve hicle. &
W WARNING ARNING Risk of /re from placing objects
in the mobile phone st owage compart-
ment
Placing other objects in the mobile phone
st ow age compartment could constitute a /re
hazard. #
Apart from a mobile phone, do not place
any other objects in the mobile phone
st ow age compartment, especially those
made of me tal. Seats and st
owing
139 139

R
Atawa llbox or charging station (mode 3)
Depending on the count ry-speci/c vehicle equip-
ment and your vehicle's charging cable, single
phase ACcharging is also possible.
Obser vethe di.erent grid requ irements of your
cur rent location when charging. Only use charging
cables which conform tothegr id requiremen ts.
Consult a quali/ed elect rician or your local grid
operator if you ha veany questions.
It is recommended that youch arge the high-volt-
age battery at a wallbox or charging station due to
th e impr ovedch arging per form ance and better
ch arging e1ciency o.ered.
S
S t
to
o wing t
wing t he c
he char
harging cable
ging cable
Alw ays st owtheve hicle charging cable in the
ch arging cable bag pr ovided and secure it in the
boot or load compartment of your vehicle.
Otherwise, thech arging cable is not su1ciently
secured. Sy
Sy
st
stem limits
em limits
The po wer output of the high-voltage battery may
be impaired bythefo llowing:
R High or low outside temp eratures
R Electrical auxiliary consumers in theve hicle
being switched on, e.g. operating the air con-
ditioning system
R Extended periods without charging
The charging time of the high-voltage battery may
be increased bythefo llowing:
R High or low outside tempe ratures
R Extended periods without charging
R The maximum available charging cur rent of
th e po wer supply equipment
R The charging cur rent set (mode 2) in the multi-
media system (/ page 341) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
ag e batt
e batt er
ery at t
y at t he
he
mains soc ke
mains soc ket (mode 2)
t (mode 2) &
D
DAN
AN GER
GER Risk of fatal injury from incor-
re ctly ins talled component parts
Connecting thech arging cable toa mains
soc ket using incor rectly ins talled component
parts could cause a /re or an electric shoc k,
fo rex ample. #
Only connect thech arging cable to a
mains soc ketth at:
R Has been proper lyinstalled and
R Has been inspected byaqu ali/ed elect ri-
cian #
For saf etyre asons, only use thech arging
cable supplied with theve hicle or an
original Mercedes-Benz charging cable.
Mercedes-Benz thoroughly tests these
original charging cables forth eir suitabil-
ity for high-voltage charging of your vehi-
cle. Pur chase these parts at a Mercedes-
Benz Service Centre and obtain advice
th ere. Driving and parking
211 211

#
Obser vethe saf ety no tes in the operat-
ing inst ructions forth ewa llbox. If
ch arging at a wallbox without pre-ins talled
cable, use the optionally available charging cable
fo rwa llbox and charging station (mode 3). The
ch arging cable is st owed in a bag in the boot/
luggage compartment.
Only use charging cables that ha vebeen tested
and appro vedby the manufacturer forch arging
th e high-voltage battery in an electric vehicle. &
D DAN
AN GER
GER Risk of fatal injuries due todam-
aged components
Connecting thech arging cable toach arging
station using a damaged component part
could cause a /re or an elect ric shoc k,for
ex ample. #
Forch arging stations with a preinstalled
ch arging cable:
R Perform a visual check of thech arg-
ing station for obvious faults, such as
massive damage tothe housing or
ch arging cable. #
Forch arging stations without a preinstal-
led charging cable:
R For saf etyre asons, only use charging
cables that ha vebeen tested and
appro vedby the manufacturer for
ch arging the high-voltage battery in
an electric vehicle.
R Never use damaged charging cables.
R Do not extend thech arging cable.
R Do not use adap ters. #
Make sure toobser vethe saf ety in form a-
tion on thech arging station. Most
charging stations must be activated before
th ech arging process, e.g. using an RFID card.
Obser vethe on-site operator's inst ructions forthe
ch arging station.
The amount of ene rgy dispensed forth ech arging
process, shown bythech arging station, may be
higher than the amount of energy actually absor-
bed bythe high-voltage batter y.This is there sult
of di.erent le vels of charging losses and is descri-
bed as rech arge e1ciency. Charging losses occur,
fo rex ample, due toheat that builds up when ch
arging or from auxiliary consumers that are
switched on. Further information on rech arge e1-
ciency can be obtained at a quali/ed specialist
wo rkshop. Se Se
tting t
tting t he maximum per
he maximum per missible c
missible char
harging cur-
ging cur-
r
r ent f
ent f or c
or char
harging at a mains soc ket
ging at a mains soc ket *
N
NO
OTE
TE Overloading the mains soc ket due
to excessive charging cur rent If
th ech arging cur rent is too high, the fuse
could be tripped or theex tern al mains supply
could overheat. #
Make sure that theex tern al mains supply
has been designed tohandle the set
ch arging cur rent. #
If necessar y,reduce the set charging
cur rent or use a di.erent mains soc ket. #
For saf etyre asons, only use thech arging
cable supplied with theve hicle or an
original Mercedes-Benz charging cable.
Mercedes-Benz thoroughly tests these
original charging cables forth eir suitabil- Driving and parking
213
213

Syst
Syst
em limits
em limits
If th e system is not ready for operation, theSys-
tem inoperative message appears in the media
displa y.
The 360° Camera will not function or will only
partially function in thefo llowing situations:
R You are driving forw ards at a speed greater
th an appr oximately 16 km/h.
R The doors are open.
R An outside mir ror is not comple tely folded out.
R The boot lid is open.
R The weather conditions are poor, e.g. heavy
ra in, sno w,fog, storm or spr ay. R
The light conditions are poo r,e.g. at night.
R The camera lens is obstructed, dirty or misted
up.
R If cameras or vehicle components in which the
cameras are /tted are damaged. In this event,
ha ve the cameras, their positions and their
setting checked at a quali/ed specialist work-
shop.
% Do not use the 360° Camera under such cir-
cumstances. You could otherwise injure oth-
ers or collide with objects when parking the
ve hicle.
Fo rte ch nical reasons, the standard height of the
ve hicle may be altered if theve hicle is car rying a
heavy load and can result in inaccu racies in the
guide lines and in the display of thege nerated
ima ges.
The /eld of vision and other functions of the cam-
era system may be restric ted due toadditional
attachments on theve hicle (e.g. licence plate
brac ket, bicycle rack ).
% The contrast of the display may be impaired
by abrupt, direct sunlight or by other light sources, e.g. when driving out of a
garage . In
th is case, pay particular attention.
% Have the display repaired or replaced if, for
ex ample, pixel er rors considerably restrict its
use.
See the no tes on cleaning the 360° Camera
(/ page 385).
Calling up t
Calling up t he vie
he view of t
w of the 360° Camer
he 360° Camer a using
a using
rev
rev er
er se g
se g ear
ear
R
R eq
eq uir
uir ements:
ements:
R The Auto reversing camera function is activa-
te d in the multimedia system (/ page 275). #
Engage reve rsege ar. #
Select the desired view in the multimedia sys-
te m (/ page 271). #
If, aTer shiTing toreve rsege ar, the image of
th ere ve rsing camera is not shown: switch o.
th eve hicle, press and hold thec button,
switch on theve hicle and engage reve rsege ar
again. 274
274
Driving and parking

#
Take cont rol of theve hicle and comple tethe
parking process.
% The vehicle path shown on the media display
may di.er from the actual vehicle path. The
turn signal indicator is switched on automati-
cally when theex iting procedure begins.
Yo u are responsible for selecting the turn signal
indicator in accordance with the tra1c condi-
tions. If necessar y,select the turn signal indicator
accordingl y.
P
P ausing A ausing A ctiv
ctive P
e Par
arking Assist
king Assist
Yo u can inter rupt the parking or exiting procedure
of Active Parking Assist byper form ing one of the
fo llowing actions, forex ample: #
depressing the brake pedal #
opening the front passenger door, a rear door,
th e boot or the bonnet #
applying the electric parking brake or activat-
ing the HOLD function #
T
To r
o r esume t
esume t he par
he parking or e
king or e xiting pr
xiting procedur
ocedure:
e:
ge ntly dep ress the accelerator pedal.
% Ifth e electric parking brake was applied
before Active Parking Assist was activated, depress
the accelerator pedal lightly tostart
th e parking or exiting procedure.
Check the area around your vehicle again before
re suming a paused parking procedure. Make sure
th at persons, animals or objects are no lon ger in
th e manoeuvring range. Also obser vethe system
limitations of Active Parking Assist.
A
A ut
ut omatic br
omatic br aking function of A
aking function of A ctiv
ctive P
e Par
arking
king
Assist
Assist
Pe rsons or objects de tected in the manoeuvring
ra nge could cause theve hicle tobrake sharply
and inter rupt the parking or exiting procedure.
The vehicle will then be held at a standstill. If you
depress the accelerator pedal, the parking or exit-
ing procedure is resumed.
Check the area around your vehicle again before
re suming the parking or exiting procedure. Make
sure that persons, animals or objects are no lon-
ge r in the manoeuvring range. Also obser vethe
system limi tations of Active Parking Assist. Manoeuvr Manoeuvr
ing assist
ing assistant
ant F
F
unction of Dr
unction of Dr iv
ive Awa
e Away Assi st
y Assi st
Drive Away Assist can reduce the se verity of an
impact when pulling away.If an obs tacle is de tec-
te d in the direction of tr avel, theve hicle's speed
is brie0y reduced toappr ox. 2 km/h. If a critical
situation is de tected, theÉ symbol appears in
th e media displa y.
Drive Away Assist can be deactivated or activated
in theManoeuvring assistance menu
(/ page 285).
% You can cancel an inter vention byDrive Away
Assist at any time bydeactivating Parking
Assist PARKTRONIC (/ page 278). &
W
WARNI NG
ARNI NGRisk of accident caused bylimi-
te d de tection per form ance of Drive Away
Assist
Drive Away Assist cannot alw ays clear lyiden-
tify objects and tra1c situations. #
Always pay careful attention tothe tra1c
situation; do not relyon Drive Away
Assist alone. Driving and parking
283
283

Ha
ve the camera checked in a Mercedes-Benz
service centre. T
T
elephone
elephone T
T
elephony
elephony N
No
ot
tes on t
es on t elephony
elephony &
W
WARNING
ARNING Risk of dist raction from operat-
ing integ rated communication equipment
while theve hicle is in motion
If yo u operate communication equipment inte-
gr ated in theve hicle when driving, you could
be distracted from the tra1c situation. This
could also cause youto lose control of the
ve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle whilst paying attention toroad
and tra1c conditions and operate the
equipment with theve hicle stationar y. &
W
WARNI NG
ARNI NGRisk of an accident from oper-
ating mobile communication equipment
while theve hicle is in motion
Mobile communications devices distract the
driver from the tra1c situation. This could also
cause the driver tolose control of theve hicle. #
Asthe driver, only operate mobile com-
munications devices when theve hicle is
stationar y. #
As a vehicle occupant, only use mobile
communications devices in the areas
intended forth is purpose, e.g. in there ar
passen ger compartment. Yo
u must obser vethe legal requ irements forthe
count ryin which you are cur rently driving when
ope rating mobile communication equipment in
th eve hicle. &
W WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around and hit
vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cannot alw aysreta in all
objects within.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cann ot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe additional information on st owing
mobile communications devices cor rectl y:
R Loading theve hicle (/ page 123)
Blu et
Bluet ooth
oo th® ®
connection:
connection: 350
350
MBUX multimedia system