lights MERCEDES-BENZ E-CLASS ESTATE 2022 User Guide

The hazard
warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is braked heavily from a speed of
more than 70 km/h toa standstill.
When you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using button 1.A A
dap
dap tiv
tive functions, MUL
e functions, MUL TIBEAM LED
TIBEAM LEDInt
Int
ellig
ellig ent Light Syst
ent Light Syst em function
em function
The MULTIBEAM LED headlamp s adapttothe
driving and weather situation and pr ovide exten-
ded functions for impr oved illumination of the
ro ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 148)
R Cornering light (/ page 148)
R Motorw ay mode (/ page 149)
R Enhanced fog light function (/ page 149)R
Bad weather light (/ page 149)
R City lighting (/ page 149)
The system is active only when it is dar k.
A
A ctiv
ctiv e headlam
e headlamps function ps function R
The headlamps follow the steering mo ve-
ments.
R Releva nt areas are better illumina ted during a
journe y.
The functions are active when the low beam is
switched on.
Depending on theve hicle's equipment, the course
of the lane in which you are driving will also be ev
aluated and the active headlamps function will
adjust the light in advance.
Cor
Cor ner nering light function
ing light function The cornering light impr
ovesth e illumination of
th e car riag ewa yove r a wide angle in the turning
direction, enabling better visibility on tight bends,
fo rex ample. The cornering light can be activated
only when the low beam is switched on.
The function is active in thefo llowing cases:
R Atspeeds below 40 km/h when the turn sig-
nal light is switched on or the steering wheel
is turned 148
148
Light and sight

Multimedia system:
4 © 5
Settings 5
Lights
5 Intelligent Light System #
Switch the function on or o.. A
A
dap
dap tiv
tive Highbeam Assist
e Highbeam Assist A A
dap dap tiv
tive Highbeam Assis
e Highbeam Assist function t function&
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist
Ad aptive Highbeam Assist does not react to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist may failto recognise other road users
with their own lighting, or may recognise them
to o late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be activated despite
the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist is only an aid. You are
re sponsible for adjusting theve hicle's lighting to
th e pr evailing light, visibility and tra1c conditions. Ad
aptive Highbeam Assist automatically switches
between thefo llowing types of light:
R Low beam
R High beam
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.150 150
Light and sight

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R In poor visibility, e.g. fog, heavy rain or snow
R Ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. Light and sight
151 151

Se
Se
tting lo
tting lo w beam (v
w beam (v ehicles wit
ehicles wit h MUL
h MULTIBEAM LED
TIBEAM LED
headlam
headlam ps onl
ps only)
y) Multimedia system:
4 © 5
Settings 5
Lights
5 Dipped-beams #
Select Right-side traffic, Left-side trafficor
Automatic. Se
Se
tting t
tting t he e
he ext
xt er
er ior lighting
ior lighting switc
switch-o.
h-o. dela
delay time
y time R
R
eq
eq uir
uir ements:
ements:
R The light switch is in theà position.
Multimedia system: 4 © 5
Settings 5
Lights
5 Ext. light. del. sw. off #
Set the swit ch-o. delay time.
When theve hicle's engine is switched o., the
ex terior lighting will be activated forth e set
time. Switc
Switc
hing t
hing t he surr
he surr ound lighting
ound lighting on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Surround lighting
When Surround lighting is active,theex terior
lighting lights up for 40 seconds aTer theve hicle
is unloc ked. When you start theve hicle, the sur-
ro und lighting is deactivated and the automatic
driving lights are activated. #
Activate or deactivate the function. Int
Int
er
erior lighting
ior lighting A
A
djus
djus ting t
ting t he int
he int er
erior lighting
ior lighting F
F
r
ront ov
ont overerhead contr
head contr ol panel
ol panel 1
p Front leT reading lamp
2 S Automatic interior lighting control
3 c Front interior lighting
4 u Rear interior lighting
5 p Front right reading lamp #
T
To switc
o switc h on or
h on or o.:
o.: press but ton1 –5
accordingl y. Light and sight
153
153

Contr
Contr
ol panel in t
ol panel in t hegr
he grab handle
ab handle 1
p Rear reading lamp #
T To switc o switc h on or
h on or o.:
o.:press the1 button. A
A
djus
djus ting t
ting t he ambient lighting
he ambient lighting Multimedia system:
4 © 5
Comfort 5
Ambient lighting
Se
Se tting t
tting t he colour
he colour #
Select Colour. #
Set the desired colour. A
A
djus
djus ting t
ting t he br
he br ightness
ightness #
Select Brightness. #
Adjust the brightness.
A
A ctiv
ctiv ating t
ating t he br
he br ightness f
ightness f or zones
or zones #
Select Brightness. #
Select Brightness zones. #
Activate or deactivate the function.
or #
Set the brightness forth e desired zones.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed lighting
ed lighting #
Select Colour. #
Select Multi-colour. #
Select a colour combination.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed animation
ed animation #
Select Colour. #
Select Multi-colour animat..
The chosen colour combination will change at
prede/ned inter vals. A
A
ctiv
ctiv ating w
ating w elcome lighting
elcome lighting #
Select Colour. #
Select Welcome.
When theve hicle is unloc ked, a special ambi-
ent lighting sequence will run.
A
A ctiv
ctiv ating dependency on air conditioning se
ating dependency on air conditioning se t-
t-
tings
tings #
Select Colour. #
Select Climate .
If ch anges are made tothete mp erature set-
ting in theve hicle, the colour of the ambient
lighting will change brie0y. Switc
Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Int. light. del. sw. off #
Switch the swit ch-o. delay time on or o..
When this function is active, the interior light-
ing lights up for a short time aTer theve hicle
is loc ked. 154
154
Light and sight

Manual disconnection of t
Manual disconnection of t
he high-v
he high-volt
oltag
age on-
e on-
boar
boar d electr
d electr ical syst
ical syst em
em &
D
DAN
AN GER
GER Risk of dea thand /re due to
modi/ed and/or damaged components of
th e high-voltage on-board electrical sys-
tem
The vehicle's high- voltage on-board electrical
system is under high voltage. If you modify
component parts in theve hicle's high- voltage
on-board electrical system or touch damaged
component parts, you may be electrocuted. In
addition, modi/ed and/or damaged compo-
nents may cause a /re.
In theeve nt of an accident or impact tothe
ve hicle underbod y,components of the high-
vo ltage electrical system may be damaged
although the damage is not visible. #
Never make any modi/cations tothe
high- voltage on-board electrical system. #
Do not switch on or use theve hicle if its
high- voltage on-board electrical system
components ha vebeen modi/ed or dam-
aged. #
Neverto uch damaged components of
th e high-voltage on-board electrical sys-
te m. #
ATer an accident, do not touch any com-
ponents of the high-voltage on-board
electrical system. #
ATer an accident, ha vetheve hicle trans-
por tedawa y. #
Have the components of the high-voltage
on-board electrical system checked at a
qu ali/ed specialist workshop and
re placed if necessar y. R R
eq
eq uir
uir ements:
ements:
Only disconnect the high-voltage on-board electri-
cal system manually in thefo llowing situations:
R The 6 restraint system warning lamp lights
up in the Instrument Displa y,e.g. aTer an
accident.
R The vehicle is badly damaged, e.g. aTer an
accident, and there straint system co mpo-
nents ha venot been triggered. Oper
Oper ating t
ating t he high-v
he high-v olt
oltag
age disconnect de
e disconnect de vice
vice #
Switch o. theve hicle. #
ShiT the transmission toposition j. #
Apply the electric parking brake. #
Secure theve hicle against rolling away. #
Open the bonnet. Driving and parking
179
179

If
yo u do not switch o. theve hicle, it is automati-
cally switched o. aTer thre e minutes.
Deactiv
Deactiv ating or activ
ating or activ ating t
ating the EC
he ECO st
O star
art/st
t/st op
op
function
function #
Press button 1.
If indicator lamp 2lights up, the ECO start/
stop function is activated. %
Depending on the model and theve hicle
equipment, the button may also be located at
a di.erent position in the centre console. EC
EC
O displa
O displa y function
y function The ECO display summarises
your driving charac-
te ristics from the start of the journey toits com-
pletion and assists you in achieving the most eco-
nomical driving style.
Yo u can in0uence consum ption bydoing thefo l-
lowing:
R driving with particular care.
R following thege arshiT recommendations. The lettering in
the segment will light up brightl y,
th e outer edge will light up and the segment will
/ll up when thefo llowing driving style is adop ted:
R 1 Steady speed
R 2 Gentle deceleration and rolling
R 3 Moderate acceleration
The lettering in the segment will be grey ,th e outer
edge will be dark and the segment will em pty
when thefo llowing driving style is adop ted:
R 1 Fluctuations in speed
R 2 Heavy braking
R 3 Sporty acceleration
The ECO display will show you when you ha ve
driven economicall y:
R The thre e segments will /ll up comple tely at
th e same time
R The edges around all thre e segments will light
up
The additional range achie ved as a result of your
driving style in comparison with a driver with a
ve ry sporty driving st yle will be shown in the192 192
Driving and parking

The
Tank is depressurised Ready for refuel-
ling messa gewill appear on the inst rument
display and the fuel /ller 0ap will open auto-
maticall y.
% Venting the fuel tank may take several
minutes.
The fuel tank can be bled only if the conditions
described abo veare ful/lled. Otherwise, drive the
ve hicle at least 0.5 km and repeat the process.
% Inthefo llowing situations, there is a malfunc-
tion:
R Indicator lamp 20ashes initially and then
goes out.
R The yellow ; engine diagnostics warn-
ing lamp lights up.
* N
NO OTE
TE Damage tothe fuel /ller 0ap when
opening it If an attem
ptis made toopen a fuel /ller 0ap
th at is not unloc ked, the fuel /ller 0ap or the
opening mechanism may be damaged. #
Only refuel when the fuel /ller 0ap has
opened automaticall y. A
A
dBlue
dBlue ®
®
(v
(vehicles wit
ehicles wit h a diesel engine onl
h a diesel engine onl y)
y) N
No
ot
tes on t
es on t opping up A
opping up A dBlue
dBlue®
®
Ad Blue ®
is a water-soluble 0uid forth e NOx
ex haust gas aTertreatment of diesel engines. In
order forth eex haust gas aTertreatment tofunc-
tion proper ly, only use AdBlue ®
in acco rdance
with ISO 22241.
Ad Blue ®
is ch aracterised bythefo llowing:
R non-t oxic
R colourless and odourless
R non-0ammable
If yo u open theAd Blue ®
tank, small amounts of
ammonia vapour may be released. Only /ll the
Ad Blue ®
tank in well-ventilated areas.
Do not let AdBlue ®
come into contact wi thskin,
ey es or clo thes. Keep AdBlue ®
awa y from chil-
dren.
Do not ingest AdBlue ®
. If AdBlue ®
is swallo wed,
immediately rinse your mouth out thoroughl y.
Drink plenty of water. Seek medical at tention at
once. Obser
vethe no tes on operating 0uids
(/ page 415).
Ad Blue ®
is available here:
R AdBlue ®
can be topped up byfast service at a
quali/ed specialist workshop, e.g. a
Mercedes-Benz Se rvice Centre.
R AdBlue ®
is available at many /lling stations
from AdBlue ®
/lling pumps.
R Alternati vely,Ad Blue ®
is available at quali/ed
specialist workshops, e.g. Mercedes-Benz
Se rvice Centres, and at many /lling stations in
Ad Blue ®
re/ll canis ters or AdBlue ®
re/ll bot-
tles.
% Ensure the connection between there /ll con-
ta iner and vehicle /ller neck does not drip.
T
T opping up A opping up A dBlue
dBlue®
®
* NO
NOTE
TEEngine damage due toAd Blue ®
being in the fuel #
AdBlue ®
must not be used to/ll the fuel
ta nk. Driving and parking
211
211

If
th eex act value of the maximum permissible
ch arging cur rent cannot be set, select the next
smaller adjustable value.
% Ifth eve hicle requ ires more time than usual to
ch arge the high-voltage batter y,ch eck the
maximum charging cur rent settings in the
multimedia system menu. Ov
Ov
er
ervie
vie w of t
w of t he c
he char
harging cable contr
ging cable contr ol panel
ol panelThe
charging cable cont rol panel sho ws the cur-
re nt status of thech arging process. 1
Supply voltage indicator
2 Charging process indicator 3
Temp erature monitor indicator
4 Safety sy stem indicator
Suppl
Suppl y v
y volt
oltag
age indicat
e indicat or
or1
1 Display
Display
Meaning
Meaning
Lights up whit eThe supplyvoltage is
connected. Char
Char
ging pr
ging pr ocess indicat
ocess indicat or
or2
2 Display Display
Meaning Meaning
Flashes green The high-voltage bat-
tery isch arging. T
T
em
em per
per atur
atur e contr
e contr ol indicat
ol indicat or
or3
3 Displ
ay
Display Meaning
Meaning
Lights up redT hegreen LED 0ashes
simultaneousl y:ove r-
te mp erature – the
ch arging per form ance
is reduced.
The green LED does
not 0ash: overtemper-
ature – thech arging
process is stopped.
Flashes redO vertemperature at
th e mains plug – the
ch arging process is
stopped. 218
218
Driving and parking

Safe
Safe
ty syst
ty syst em indicat
em indicat or
or4
4 Display
Display
Meaning
Meaning
Flashes redC harging cable mal-
function – cann ot
car ryout thech arging
process, reset the
ch arging cable operat-
ing unit.
Lights up redW hite LED is o.:
po we r supply malfunc-
tion – cannot car ry
out thech arging proc-
ess, replace the mains
soc ket.
White LED is on: vehi-
cle malfunction – can-
not car ryout the
ch arging process,
re set thech arging
cable operating unit. When all
four displa yslight up, thech arging cable
operating unit per form s a self-test. If
te mp erature monitor 3indicates a malfunc-
tion, it may help toprotect thech arging cable
from direct sunlight.
T
T o r o r ese
ese t t
t the c
he c har
harging cable oper
ging cable oper ating unit:
ating unit:if
saf ety sy stem 4indicates a charging cable mal-
function or a vehicle malfunction, /rst reset the
ch arging cable operating unit. Todo this, discon-
nect thech arging cable from theve hicle and from
th e mains soc ket and waitfor appr oximately /ve
seconds. If the malfunction persists aTer the
ch arging cable is reconnected, charging at the
mains soc ket is not possible. The charging cable
must be replaced or theve hicle plug must be
ch ecked at a quali/ed specialist workshop,
depending on the indicator. F
F
unctions of t
unctions of t he indicat
he indicator lam
or lam ps on t
ps on t he v
he vehicle
ehicle
soc ket
soc ket R
Depending on the national version, one of the
fo llowing vehicle soc kets is loca ted on the
ri ght-hand side of there ar bumper.
R The soc ket 0ap is centrally loc ked and
unloc kedto get her with theve hicle. T
T
ype 1 v
ype 1 v ehicle soc ket
ehicle soc ket 1
Status of thech arging process Driving and parking
219
219