key MERCEDES-BENZ E-CLASS SALOON 2022 Owner's Guide

Displa
Displa
ying engine data
ying engine data Multimedia system:
4 © 5
Info #
Select Engine.
The engine data is displa yed.
% The actual (maximum) values that can be ach-
ie ve dfo r engine output and engine torque
may deviate from the certi/ed values within
th e count ry-speci/c guidelines for permissible
to lerances (basis: UN-ECE No. 85 or count ry-
speci/c guidelines).
In0uencing variables that can in0uence this
are, forex ample:
R Sea le vel
R Fuelqu ality
R Outside temp erature
R Operating temp erature of the engine
% The values displa yed ser veonly as orienta-
tion. The values for engine output and engine
to rque shown on the media display may devi-
ate from the actual values. Calling up t
Calling up t
he fuel consump
he fuel consump tion indicat
tion indicator
or Multimedia system:
4 © 5
Info #
Select Consumption.
The cur rent and average fuel consum ption is
displa yed. A
A
ut
ut omatic tr
omatic tr ansmission
ansmission DIRECT SELECT lev
DIRECT SELECT lev
er
er F F
unction of t
unction of t he DIRECT SELECT lev he DIRECT SELECT lev er
er &
W
WARNING
ARNING Risk of accident due toincor-
re ct gearshiTing
If th e engine speed is higher than the idle
speed and you engage the transmission posi-
tion hork, theve hicle may accelerate
sharpl y. #
Ifyo u engage the transmission position
h ork when theve hicle is at a stand-
still, alw ays depress the brake pedal
/rmly and do not accelerate at the same
time. &
W
WARNING
ARNING Risk of accident and injury due
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c.
R operate vehicle equipment and become
trapped, forex ample.
In addition, thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. #
Keep theve hicle key out of there ach of
ch ildren. Driving and parking
189
189

T
T
ype 2 v
ype 2 v ehicle soc ket
ehicle soc ket 1
Locking status
2 Status of thech arging process Ov
Ov
er
ervie
vie w of t
w of t he loc
he loc king st
king st atus
atus Loc
Loc
king st
king st a-
a-
tus
tus 1
1 Displ
ay
Display Meaning
Meaning
% Lights up
whiteR
The vehi-
cle soc ket
is
unloc ked
R Connect
orremo ve
ch arging
cable Ov Ov
er
ervie
vie w of t
w of t he c
he char
harging pr
ging pr ocess st
ocess st atus
atus S
S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Displ
ay
Display Meaning
Meaning
# Flashes
orangeConnection is
being estab-
lished
# Flashesgreen Active energy
0ow S S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Display
Display
Meaning
Meaning
# Lights up
orangeInter
ruption in
ch arging
# Lights up
green Charging
process com-
ple
ted
# FlashesredA malfunction
has occur red
during charg-
ing. The indi-
cator lamp
goes out aTer
appr oximately
90 seconds. %
Ifth e indicator lamps are o., lock or unlock
th eve hicle using thekey. The indicator lamps
will then display the cur rent status of the
ch arging process. Driving and parking
207 207

#
In particular, do not park on dry grass-
land or har vested grain /elds. &
W
W ARNING
ARNING Risk of accident and injury due
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c.
R operate vehicle equipment and become
trapped, forex ample.
In addition, thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. #
Keep theve hicle key out of there ach of
ch ildren. *
N
NOOTE
TE Damage totheve hicle due toitro ll-
ing away #
Always secure theve hicle against rolling
awa y. *
N
NO
OTE
TE Damage due totheve hicle lo wering V
V
ehicles wit
ehicles wit h AIR BOD
h AIR BODY C
Y CONTR
ONTR OL or lev
OL or lev el
el
contr
contr ol:
ol:The vehicle can lo wer because of tem-
perature di.erences or longer non-operational
times. This can cause damage toparts of the
body. #
When stopping theve hicle and when
driving o., make sure that there are no
obstacles such as curbs under or in the
immediate vicinity of the body. #
Bring theve hicle toa standstill bypressing the
brake pedal. #
Ongradients, turn the front wheels so that the
ve hicle will rollto wa rdsth eke rb if it starts
moving. #
Apply the electric parking brake. Driving and parking
213 213

#
Engage transmission position jin a station-
ary vehicle with the brake pedal depressed
(/ page 190). #
Switch o. theve hicle bypressing button 1.#
Release the service brake slo wly.#
Get out of theve hicle and lock it.
% When you park theve hicle, you can still oper-
ate the side windo wsand the sliding sunroof
fo r appr oximately four minutes if the driver's
door is closed.
% When you park theve hicle, you can still oper-
ate the side windo wsand the panoramic slid-
ing sunroof for appr oximately four minutes if
th e driver's door is closed. Electr
Electr
ic par
ic parking br
king br ake
ake F
F
unction of t
unction of t he electr
he electric par
ic parking br
king br ak
ake (appl
e (appl ying
ying
aut
aut omaticall
omaticall y)
y) &
W
WARNING
ARNING Risk of accident and injury due
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c.
R operate vehicle equipment and become
trapped, forex ample.
In addition, thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. #
Keep theve hicle key out of there ach of
ch ildren. The electr
The electr
ic par
ic parking br
king br ak
ake is applied if t
e is applied if t he tr
he trans-
ans-
mission is in position
mission is in position j
jand one of t
and one of t he f
he follo
ollowing
wing
conditions is
conditions is ful/lled:
ful/lled:
R The vehicle is switched o..
R The seat belt tongue is not inse rted in the seat
belt buckle of the driver's seat and the driver's
door is opened.
% Toprev ent application: pull the handle of the
electric parking brake (/ page 215).
In t
In t he f
he f ollo
ollowing situations, t
wing situations, t he electr
he electric par
ic parking
king
br
br ak
ak e is also applied:
e is also applied:
R The HOLD function is keeping theve hicle sta-
tionar y.
R Active Parking Assist is keeping theve hicle
stationar y.
R Active Distance Assist DISTRONIC is bringing
th eve hicle toa standstill. 214
214
Driving and parking

%
The electric parking brake is only securely
applied if there d! indicator lamp is lit
continuousl y.
R
R eleasing eleasing #
Switch on theve hicle. #
Pull handle 1.
The red! indicator lamp in the inst rument
clus ter goes out.
Emerg
Emerg ency br
ency br aking
aking #
Press and hold handle 1.
As long as theve hicle is in motion, the
Release parking brake message is displayed
and there d! indicator lamp 0ashes.
When theve hicle has been braked toa stand-
still, the electric parking brake is applied. The
re d! indicator lamp lights up in the inst ru-
ment clus ter. Inf
Inf
or
ormation on collision det
mation on collision det ection on a park
ection on a park ed
ed
v
v ehicle
ehicle If a collision is de
tected when theto w- awa y pro-
te ction is primed on a loc kedve hicle, you will re
ceive a noti/cation in the multimedia system
when you switch theve hicle on.
Yo u will receive information about thefo llowing
points:
R The area of theve hicle that may ha vebeen
damaged.
R The forc e of the impact.
The following situation can lead toinadver tent
activation:
R The par kedve hicle is mo ved, fore xamp le, in a
two-stor eygarage.
% Deactivate tow- awa y protection in order to
pr ev ent inadver tent activation. If you deacti-
va te to w-awa y protection, collision de tection
will also be deactivated.
Syst
Syst em limits em limits
De tection may be restric ted in thefo llowing situa-
tions:
R theve hicle is damaged without impact,
fo re xamp le, if an outside mir ror is torn o. or
th e paint is damaged byakey
R an impact occurs at low speed R
the electric parking brake is not applied
% You are responsible foryo ur vehicle. There-
fo re , alw ays make sure that your vehicle is
free of damage and is roadwor thy. N N
o
ot
tes on par
es on par king up t
king up the v
he vehicle
ehicle If
yo u lea vetheve hicle par ked up for longer than
six weeks, it may su.er damage thro ugh disuse.
The 12 V battery may also be impaired or dam-
aged byheavy discharging.
% Further information can be obtained at a
qu ali/ed specialist workshop. S S
t
tandb
andb y mode (e
y mode (e xt
xtension of t
ension of t he st
he start
arter batt
er batt er
ery's
y's
per
per iod out of use)
iod out of use) S
S
t
tandb
andb y mode function
y mode function
% This function is not available for all models.
If standby mode is activated, energy loss will be
minimised during extended periods of non-opera-
tion. 216
216
Driving and parking

Syst
Syst
em se
em se ttings
ttings Ov
Ov
er
ervie
vie w of t
w of t he sy
he syst
stem se
em se ttings menu
ttings menu In
the system settings menu, you can make set-
tings in thefo llowing menus and control ele-
ments:
R Displa y:
- Styles
- Instrument lighting
- Display brightness
- Edge lighting
- Day/night design
R Control elements:
- Keyboard language and handwriting recog-
nition
- Sensitivity of theto uchpad
- Sensitivity of theTo uch Controls
R LINGU ATRO NIC
R Sound
- Enter tainment
- Navigation and tra1c announcements -
Telephone
- Voice ampli/cation tothere ar
R Connectivity:
- Wi-Fi, Blue tooth ®
, NFC
R Time & date
R Language
R Units for distance
R SoTware updates
R Data import/export
R PIN pr otection
R System reset Inf
Inf
or
ormation on im
mation on im port
portant syst
ant syst em updat
em updat es
es Impor
tant system updates may be necessary for
th e security of your multimedia system's data.
Install these updates, or else the security of your
multimedia system cannot be ensured.
A system update consists of thre e steps:
R Downloading or copying of the data requ ired
fo r installation
R Installation of the downloaded system update R
Activation of the downloaded system update
by restarting the system
% If automatic soTware updates are activated,
th e system updates will be downloaded auto-
maticall y.
The multimedia system pr ovides a message when
a system update is available.
Yo u ha vethefo llowing selection options:
R Accept and install
The system update will be downloaded in the
background.
R Information
Information about the pending system update
is displa yed.
R Later
The system update can be downloaded man-
ually at a later time.
Deep syst Deep syst em updat
em updates
es
Deep system updates access vehicle or system
settings and can therefore only be car ried out
when theve hicle is stationary and the ignition is
switched o.. MBUX multimedia system
303
303

If
th e download of a deep system update is com-
ple teand the downloaded system update is ready
fo r installation, you will be informed of this aTer
th e next ignition cycle, forex ample.
% Park theve hicle safely in a suitable location
before starting the installation.
Re quirements forth e installation:
R The ignition is switched o..
R Notes and warnings ha vebeen read and
accep ted.
R The electric parking brake has been applied.
If all requ irements ha vebeen ful/lled, the down-
loaded system update is installed. The multimedia
system cannot be operated while the downloaded
system update is being installed and vehicle func-
tions are restric ted.
If errors should occur during the installation, the
multimedia system automatically attem ptsto
re store the pr evious version. If restoration of the
pr ev ious version is not possible, a symbol appears
on the media displa y.Consult a quali/ed special-
ist workshop toresol vethe problem. Se
Se
tting up a W
tting up a W i-F
i-Fi ho
i ho tspot
tspot R
R
eq
eq uir
uir ements:
ements:
R T
To se
o se t up t
t up t he W
he Wi-F
i-Fi connection of t
i connection of t he multime-
he multime-
dia sy
dia sy st
stem wit
em wit h e
h ext
xter
er nal ho
nal ho tspo
tspots:
ts:your vehicle
does not ha vea permanent lyinstalled com-
munication module.
R The device tobe connected supports at least
one of the types of connection described.
Multimedia system: 4 © 5
Settings 5
System
5 Wi-Fi & Bluetooth
A
A ctiv
ctiv ating/deactiv
ating/deactiv ating W
ating Wi-Fi
i-Fi #
Select Wi-Fi.
Connecting t
Connecting t he multimedia syst
he multimedia syst em wit
em with an e
h an ext
xter-
er-
nal ho
nal ho tspo
tspot using W
t using W i-Fi
i-Fi
The type of connection established must be selec-
te d on the multimedia system and on the device
to be connected.
% The connection procedure may di.er depend-
ing on the device. Follow the inst ructions that
are shown in the displa y.Fu rther information can be
found in the manufacturer's operating
inst ructions. #
Select Internet settings . #
Select Connect via Wi-Fi . #
Select Add hotspot.
Connecting using a QR code
Connecting using a QR code #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using QR code. #
Scan the displa yed QR code with the device to
be connected.
The Wi-Fi connection is established.
Connecting using a secur Connecting using a secur itykey
ity key #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using security key. #
Have the security key displa yed on the device
to be connected (see the manufacturer's oper-
ating inst ructions). #
Enter this security key on the multimedia sys-
te m. 304
304
MBUX multimedia system

#
Con/ rmthe entry with ¡.
Connecting using a WPS PIN
Connecting using a WPS PIN #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using WPS PIN input .
The multimedia system generates an eight-
digit PIN. #
Enter this PIN on the device tobe connected. #
Con/rm the entr y.
Connecting using a butt
Connecting using a butt on
on#
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect via WPS PBC. #
Select "Connect via WPS PBC" in the options
on the device tobe connected (see the manu-
fa cturer's operating instructions). #
Press the WPS button on the device tobe con-
nected. #
Select Continue inthe multimedia system. A
A
ctiv
ctiv ating aut
ating aut omatic connection
omatic connection #
Select Connect via Wi-Fi. #
Select the options rofthe desired Wi-Fi
networ k. #
Activate Permanent Internet connection .
Connecting wit
Connecting wit h a kno
h a known W
wn Wi-F
i-Fi ne
i ne tw
twork
ork #
Select Connect via Wi-Fi. #
Select a Wi-Fi networ k.
The connection is established again.
Con/gur
Con/gur ing
ingt
the multimedia syst
he multimedia syst em as a W
em as a Wi-F
i-Fi ho
i ho t-
t-
spo
spo t f
t for e
or e xt
xter
er nal de
nal de vices
vices
The type of connection established depends on
th e device tobe connected. The function must be
suppor tedby the multimedia system and bythe
device tobe connected. The type of connection
established must be selected on the multimedia
system and on the device tobe connected. #
Select Vehicle hotspot. #
Select Connect device to vehicle hotspot .
Connecting using WPS PIN g Connecting using WPS PIN g ener
eneration
ation #
Select Connect using WPS PIN generation. #
Enter the PIN shown in the media display on
th e device tobe connected and con/ rm.
Connecting using WPS PIN entry
Connecting using WPS PIN entry #
Select Connect using WPS PIN input. #
Enter the PIN that is shown on theex tern al
device's displ ayon the multimedia system.
Connecting using a butt
Connecting using a butt on
on #
Select Connect via WPS PBC. #
Press the push button on the device tobe
connected (see the manufacturer's operating
inst ructions). #
Select Continue .
Connecting using a secur
Connecting using a secur itykey
ity key #
Select Connect device to vehicle hotspot.
A secu rity key is displa yed. #
Select theve hicle from the device tobe con-
nected. The vehicle is displ ayed with the
DIRECT-MBUX XXXXX network name. #
Enter the security key which is shown in the
media display on the device tobe connected. #
Con/rm the entr y. MBUX multimedia system
305
305

Connecting using NFC
Connecting using NFC
#
Select Connect via NFC. #
Activate NFC on the mobile device (see the
manufacturer's operating instructions). #
Hold the device tobe connected at theve hi-
cle's NFC inter face. #
Select Finished.
The mobile device is now connected tothe
multimedia system hotspot via NFC.
Gener
Gener ating a ne
ating a ne w secur
w securitykey
ity key #
Select Vehicle hotspot. #
Select Generate security key.
A connection will be established wi th the
ne wly created security key.#
T
To sav
o sav e a secur
e a secur itykey
ity key :
:select Save.
When a new security key is sa ved, all existing
Wi -Fi connections are then disconnected. If
th eWi -Fi connections are being re-estab-
lished, the new security key must be en tere d. Syst
Syst
em language
em language N
No
ot
tes on t
es on t he syst
he syst em language
em language
This function allo wsyouto determ ine the lan-
guage forth e menu displa ysand the navigation
announcements. The selected language a.ects
th ech aracters available for entr y.The navigation
announcements are not available in all languages.
If a language is not available, the navigation
announcements will be in English.
Se
Se tting t tting t he syst
he syst em language
em language
Multimedia system:
4 © 5
Settings 5
System
5 ® Language #
Set the language.
% Ifyo u are using Arabic map data, thete xt
information can also be shown in Arabic on
th e navigation map. Todo so, select 

#
Ensure there is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The 360° Camera or there ve rsing camera is
switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation and heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid could
open unintentionall y.
R For car washes with a con veyor system: -
Neutral iis engaged.
- Ifyo uwo uld like tolea vetheve hicle while
it is being washed, make sure theke y is
located in theve hicle. The park position
j isotherwise automatically engaged.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W
WARNING
ARNING Risk of an accident when using
high-pressure cleaners with round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. To
avo id damage toyour vehicle, obser vethefo l-
lowing when using a high-pressure cleaner:
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid could
open unintentionall y.
R Maintain a distance of at least 30 cm tothe
ve hicle.
R V Vehicles wit
ehicles with decor h decorativ
ative f
e foil:
oil: Parts of your
ve hicle are co vered with a decorative foil.
Maintain a distance of at least 70 cm between
th efo il-co vered parts of theve hicle and the
nozzle of the high-pressure cleaner. Mo vethe
high-pressure cleaner nozzle around whilst
cleaning. The waterte mp erature of the high-
pressure cleaner must not exceed 60°C.
R Obser vethe information on the cor rect dis-
ta nce in the equipment manufacturer's opera-
to r manual.
R Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tyres, gaps, electrical component parts, bat-
te ries, illuminants and louvres. Maintenance and care
349 349