engine MERCEDES-BENZ E-CLASS SALOON 2022 Manual PDF

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Until then, operate the high beam manuall y.
Hazard warning lamps mal-
functioning *T
he hazard warning lamp switch is malfunctioning. #
Consult a quali/ed specialist workshop. Climat Climat
e contr
e contr ol
ol Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
&
inoperative See Owner's
Man. *T
he stationary heater is temp orarily malfunctioning. #
When theve hicle is stationary on a le vel sur face and the engine has cooled down, make up tofour attem ptsto
switch on the stationary heater, waiting se veral minutes between each attem pt. #
Ifth e stationary heater does not switch on, consult a quali/ed specialist workshop.
&
inoperative Battery low *T
he on-board elect rical system voltage is too lo w.
The stationa ryheater has switched itself o.. #
Drive an extended distance until the battery has reached a su1cient charge leve l again. 424 424
Display message
s andwarning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
&
Pre-entry climate control
(via key) available again
after engine start *Y
ou ha veattem pted toswitch on pre-ent ryclimate cont rol more than twice with theve hicle switched o.. #
Start theve hicle forte n seconds.
Pre-entry clima tecont rol is operational again.
& Pre-entry climate control
(via key) inoperative HV-
battery low *T
hecharge ofthe high-voltage battery is too lo w.Pre-entry clima tecont rol cannot be switched on. #
Char gethe high-voltage battery (/ page 200).
When the high-voltage battery is su1ciently charge d, pre-ent ryclimate cont rolwill be operational again. 426 426
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Request service personnel from the operator of thech arging station via the emer gency call button or the emer-
ge ncy numbers attached tothech arging station.
Vehicle not currently being
charged Charging station
fault *A
malfunction has occur red in thech arging station or the RFID card is not recognised. #
Start thech arging process at a di.erent charging station.
or #
Have the RFID card checkedto ensure it is functioning.
Charging method currently
unavailable Please try
again or change charging
method *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Charging fault Please
change charging method
See Owner's Manual *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Only electric drive availa-
ble Power limited *T
he fuel tank is em pty and the combustion engine is switched o.. The output of your vehicle is limi ted because you
are driving in elect ric mode. 428 428
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Refuel immedia tely.
Subse quentl y,there may be temp orary restrictions in theav ailability of elect ric mode over a driving distance of
50 km.
If th ere is fuel in theve hicle, there is a fault with the combustion engine. #
Consult a quali/ed specialist workshop.
"Electric" drive program
currently unavailable *T
hecharge leve l of the high-voltage battery is not su1cient forth e Electric drive prog ram.
Char gethe high-voltage battery (/ page 200).
Reduced drive system per-
formance See Owner's
Manual *T
he drive system switches toemer gency ope ration mode due toa malfunction. #
Drive on carefull y. #
Consult a quali/ed specialist workshop.
Û
Battery overheated Stop,
everybody out! Outdoors if
possible *T
he high- voltage battery has overheated. There is a risk of /re. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
If possible, stop theve hicle in the open air and ensure that all vehicle occupants getout.
% Supporting vehicle functions may activate automaticall y,e.g. the air-recirculation mode as part of climate control. #
Do not continue driving. #
If smoke is present, lea vethe danger zone and call the /re service immediatel y. #
Consult a quali/ed specialist workshop even if there are no extern al signs of a /re. Displ
aymessages and warning/indicator lamps
429 429

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Û
Malfunction *T
he drive system is malfunctioning. A warning tone will also sound. #
Consult a quali/ed speciali stwo rkshop.
*T here is a serious malfunction if the display message and warning tone are repeated at short inter vals. You must stop
th eve hicle immediately in accordance with the tra1c conditions because the drive system is automatically deactiva-
te d. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Switch o. theve hicle and consult a quali/ed specialist workshop.
Û
Malfunction Visit workshop *T
he drive system is malfunctioning. #
Consult a quali/ed specialist workshop.
Without changing gear,
consult workshop *T
he drive system cann otbe restar ted due toa malfunction.
If th e transmission position is changed using the DIRECT SELECT le ver,th e drive system will be switched o. in park
position jor neutral i. #
Consult a quali/ed specialist workshop and do not change the transmission position.
Without starting engine
again, consult workshop *I
t is not possible torestart the drive system due toa malfunction. #
Do not switch o. the drive system; drive on tothe nearest quali/ed specialist workshop. 430 430
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
d
Malfunction *T
he drive system is malfunctioning. The output of your vehicle is restric ted. #
Consult a quali/ed specialist workshop.
d
Stop Switch engine off *T
he drive system is malfunctioning. #
Stop theve hicle immediately in accordance with the tra1c conditions and switch o. the drive system. Do not con-
tinue driving. #
Do not tow theve hicle, stop towing if necessar y. #
Consult a quali/ed specialist workshop.
d
Performance severely limi-
ted *T
he drive system is outside the normal operating temp erature range, e.g. due toextremely low or high outside temp er-
atures.
The output is se verely re stricted.
Once the operating temp erature of the drive system returns tonormal, the full output will be available again. The dis-
play message will disappear.
*I fth e drive system po wer output is still reduced, there is a fault in the drive system. #
Drive on carefull y. #
Consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
431 431

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
6
Please wait Depressurising
tank *V
Vehicles wit ehicles wit h pe
h petr
trol engines:
ol engines: the pressure in the fuel tank is reduced before the fuel /ller 0ap is opened. The pressure
re duction can take up to15 minutes.
6 Tank is depressurised
Ready for refuelling *V
Vehicles wit ehicles wit h pe
h petr
trol engines:
ol engines: the pressure in the fuel tank is released and the fuel /ller 0ap opens.
6
Tank ventilation Malfunc-
tion Consult workshop *V
Vehicles wit
ehicles wit h pe
h petr
trol engines:
ol engines: There is a malfunction in the fuel system. #
Consult a quali/ed specialist workshop. 432
432
Displ
aymessages and warning/indicator lamps

V
V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
d
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Operation only possible in
transmission position P *T
he ball neck will not swivel because transmission position h,kor neutral iis selected. #
Depress the brake pedal. #
Engage park position j.
ï Trailer coupling extending… *T
he ball neck is retracting/extending.
Do not attem pttospeed up, slow down or initiate the swivel mo vement using your hand, foot or other aids. During the
swivel mo vement, do not couple a trailer.
When the ball neck has reached an operational position, the display message will disappear. Display messages and
warning/indicator lamps
433 433

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
M *T
he bonn etis open. &
W
WARNING
ARNING Risk of accident due todriving with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine bonnet is loc ked. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Close the bonnet.
N *T
he boot lid is open. &
D
DAN
AN GER
GER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust gases such as carbon monoxide. Exhaust gases can enter theve hicle
interior if the boot lid is open when the engine is running, especially if theve hicle is in motion. #
Always switch o. the engine before opening the boot lid. #
Never drive with the boot lid open. #
Close the boot lid. Display messages and
warning/indicator lamps
437
437

Engine
Engine
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
To switch off the engine,
press the Start/Stop but-
ton for at least 3 seconds
or 3 times. *Y
ou ha vepressed the start/s top button while theve hicle is in motion. #
Information about switching o. theve hicle while driving (/ page 171).
Cannot start engine See
Owner's Manual *T
hevehicle cann otbe star ted. #
Switch theve hicle o. and switch it back on #
Ifth e display message still appears, consult a quali/ed specialist workshop.
+
Top up coolant See Own-
er’s Manual *T
he coolant le vel is too lo w.
* N NO
OTE
TE Engine damage due toinsu1cient coolant #
Avoid long journe yswith insu1cient coolant. #
Add coolant (/ page 346). #
Have the engine cooling system checked at a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
439
439