fold seats MERCEDES-BENZ E320 BLUETEC 2007 W211 Owner's Manual

44 Getting startedAdjustingHead restraint adjusting
Manually adjust the head restraint. 
Push or pull on the upper edge of the
head restraint cushion to the desired
position.Comfort head restraint* adjusting
1Head restraint side adjustment
2Head restraint fore and aft adjustment
To adjust the head restraint sides:

Pull or push sides1 into desired posi-
tion.To move the head restraint forward or
backward:

Pull or push head restraint in direction
of arrow2.
For more information on seats, see “Seats”
(
page 129).
i
Adjust the head restraint in such a way that
it is as close to the head as possible.
Warning!
G
When folding back the side cushions, never
reach between the side cushion and the
mounting post. You could otherwise be
trapped.
i
Adjust the head restraint in such a way that
it is as close to the head as possible.

92 Safety and SecurityOccupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.Not foldable rear seat backrest
1Cover

Remove cover1 from anchorage
ring3 (
page 93).

Store cover1 in a convenient place
(e.g. glove box).

Guide tether strap between head re-
straint and top of the seat back.
Head restraint must be installed (if re-
movable) and positioned such that the
top tether strap can pass freely be-
tween the head restraint and the top of
the seat back.
Warning!
G
Infants and small children should never
share a seat belt with another occupant.
During an accident, they could be crushed
between the occupant and seat belt.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints
are not properly secured in the vehicle and
the child is not properly secured in the child
restraint.
Children too big for a toddler restraint must
ride in seats using regular seat belts. Posi-
tion shoulder belt across chest and shoul-
der, not face or neck. A booster seat may be
necessary to achieve proper seat belt posi-
tioning for children over 41 lb until they
reach a height where a lap/shoulder belt fits
properly without a booster.
When the child restraint is not in use, re-
move it from the vehicle or secure it with the
seat belt to prevent the child restraint from
becoming a projectile in the event of an ac-
cident.
Do not leave children unattended in the ve-
hicle, even if the children are secured in a
child restraint system. Unsupervised chil-
dren in a child restraint system may use ve-
hicle equipment and may cause an accident
and/or serious personal injury.

129 Controls in detailSeats
 Seats
For more information on seat adjustment,
see “Adjusting” (
page 41).
For more information on folding the seats,
see “Loading” (
page 273).
Front seat active head restraints
You cannot remove the active head re-
straint on the driver’s and front passen-
ger’s seats.For removal of the active head restraints
we recommend that you contact an autho-
rized Mercedes-Benz Center.
For information on head restraint adjust-
ment, see “Seat adjustment” (
page 43).
For information on active head restraints,
see “Active head restraints” (
page 87).
Rear seat head restraints
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
Adjust the head restraint in such a way that
it is as close to the head as possible.Warning!
G
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.i
The rear seat head restraints cannot be ad-
justed.

130 Controls in detailSeatsFolding head restraints back with
switch in the center console
The rear seat head restraints can be folded
backward for increased visibility.
1Head restraint release switch
Switch on the ignition (
page 37).

Press the symbol-side on switch1to
release the head restraints.
The head restraints will fold backward.Placing head restraints upright

Pull the head restraint forward until it
locks into position.Removing and installing rear seat head
restraints* (vehicles with split rear
bench seat* only)
1Release catch
Removing rear seat head restraints

Fold the backrest forward
(page 277).

Fold back head restraint (
page 130).

Press head restraint release catch1
and pull the head restraints out of the
guides.

Fold the backrest back to its original
position.
!
Make sure the head restraints engage when
placing them upright. Otherwise their protective
function cannot be assured.

277 Controls in detail
Loading
Folding the backrest forward
1Release handle
Pull release handle1.
The seat cushion automatically springs
upward slightly.1Seat cushion
2Seat backrest

Grip the back of seat cushion1 and
fold forward.

Push the rear seat head restraints all
the way in.

Pull the handle in the trunk.
The seat backrest is released and the
head restraints fold back.

Fold the seat backrest forward.
!
You must always release the seat cushion
and fold it up before folding the seat backrests
forward. The upholstery on the seat backrest
may otherwise be damaged.
i
If tall persons have occupied the driver’s and
front passenger seats, it may be necessary to
move these seats forward slightly in order to fold
the rear seat backrests forward.
i
If the rear center seat is to be occupied
while driving, it may be necessary to fold the seat
belt buckle up again.
!
Make sure the head restraints fit all the way
into the seat cushion pockets. This will prevent
the backrests from being damaged during load-
ing.

283 Controls in detail
Useful features
Storage compartment in the rear arm-
rest
Press the handle upwards and fold the
rear armrest lid up.Ruffled storage bags
Ruffled storage bags are located on the
back of the front seats.
Warning!
G
USA only: Do not place objects with a com-
bined weight of more than 4.4 lb (2 kg) into
the ruffled storage bag. Otherwise, the
Occupant Classification System OCS
(page 75) may not be able to properly
approximate the occupant weight category.
The ruffled storage bag is intended for stor-
ing light-weight items only.
Heavy objects, objects with sharp edges or
fragile objects may not be transported in the
ruffled storage bag. In an accident, during
hard braking, or sudden maneuvers, they
could be thrown around inside the vehicle
and cause injury to vehicle occupants.
The ruffled storage bag cannot protect
transported goods in the event of an acci-
dent.

508 IndexHead restraints 129
Comfort head restraint, Adjusting 44
Folding back 130
Front seat, Adjusting 43
Rear seat, Removing and
installing 130
Headlamp cleaning system* 198
Headlamp shut-off delay see Delayed
shut-off, Exterior lamps
Headlamps
Active Bi-Xenon headlamps* 137
Automatic headlamp mode 138
Bi-Xenon* 137
Cleaning lenses 372
Cleaning system* 198
Halogen 446
High beam see High beam flasher
High beam see High beam headlamps
Low beam see Low beam headlamps
Manual headlamp mode 138
Replacing bulbs 446
Switch 56
Headliner and shelf below rear window,
Cleaning and care of 376
Heated seats* 132Heated steering wheel
(Canada only) 289
Height adjustment
Vehicle level control 266
High beam flasher 57, 142
High beam headlamps 57, 137, 444
Indicator lamp 27, 142
Replacing bulbs 444
Switching on 142
High mounted brake lamp 445
High-performance brake system
(E 63 AMG only) 312
Hood 325
Message in display 430
Horn 25
HVAC see Climate control system
Hydroplaning 314
I
Identification labels 476
Identification Number, Vehicle (VIN) 477
Ignition 38
Immobilizer 106
Indicator lamps see Lamps, indicator and
warning
Infant and child restraint systems see Chil-
dren in the vehicleInflation pressure see Tires, Inflation pres-
sure
Inside door handle 119
Instrument cluster 26, 148
Illumination brightness 148
Lamps 380
Multifunction display 151
Instrument lighting see Instrument cluster,
Illumination brightness
Instrument panel see Instrument cluster
Instruments and controls see Cockpit
Interior lighting
Delayed shut-off 176
Interior rear view mirror 47
Auto-dimming mirrors 198
Interior storage spaces see Storage com-
partments
J
Jack 432
Jump starting 464
K
Key, Mechanical 436
Loss of 119
Valet locking 126