engine MERCEDES-BENZ EQA SUV 2021 Owner's Manual

R
R
egulat
egulat or
ory r
y r adio
adio identi/cation
identi/cation and not
and notes
es R
R
egulat
egulat or
ory r
y r adio
adio identi/cation
identi/cation of small com
of small compo-
po-
nents
nents Manufacturer information about
radio-based vehi-
cle components can be found using thekey
phrase "Regulatory radio identi/cation" in the Dig-
ital Owner's Manual in theve hicle, on the internet
and in the app. R
R
egulat
egulat or
ory r
y r adio
adio identi/cation
identi/cation – Indonesia
– Indonesia Manufacturer information about
radio-based vehi-
cle components can be found using thekey
phrase "Regulatory radio identi/cation – Indone-
sia" in the Digital Operator's Manual in theve hi-
cle, on the internet and in the app.
% These are not small components. Information
about small components can be found using
th eke y phrase "Regulatory radio identi/cation
of small components". F F
urt
urt her
her com
com ponent-speci/c
ponent-speci/c inf
inf or
ormation
mation Fu
rther component-speci/c information can be
fo und using theke y phrase "fur ther component-
speci/c information" in the Digital Owner's Man-
ual in theve hicle, on the internet and in the app. V
V
ehicle
ehicle identi/cation
identi/cation plat
plate, VIN and engine num-
e, VIN and engine num-
ber ov
ber overerview
view
V
V ehicle
ehicle identi/cation
identi/cation plate
plate Te
ch nical data
349
349

Ve
hicle identi/cation plate (e xample:Kuwa it)
1 Vehicle manu facturer
2 Place of manufacture
3 Manu facturing date
4 Vehicle model
5 VIN Ve
hicle identi/cation plate (e xample: all other
countries)
1 Vehicle manu facturer
2 EUgeneral ope rating permit number (only for
cer tain countries)
3 VIN (vehicle identi/cation number)
4 Maximum permissible gross vehicle weight
(kg) 5
Maximum permissible gross weight of vehicle
combination (kg) (only for speci/c countries)
6 Maximum permissible front axle load (kg)
7 Maximum permissible rear axle load (kg)
8 Paint code
% The data shown in the illust ration is example
data.
VIN in t
VIN in t he engine com
he engine com par
partment
tment
The VIN can be found on the crossmember in the
engine compartment. Further information can be
obtained at a quali/ed specialist workshop. 350
350
Te
ch nical data

Fu
rther information on appr oved operating 0uids
is available at thefo llowing locations:
R inthe Mercedes-Benz Speci/cations for Oper-
ating Fluids byentering the designation
- at https://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R at a quali/ed specialist workshop N
No
ot
tes on br
es on br ak
ake
e0uid
0uid No
tethe inst ructions about operating 0uids
(/ page 351). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant
Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 351). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the drive system tocool down
before youto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N
NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection.
Information on coolant is available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1
- Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N NOOTE
TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. 352
352
Te
ch nical data

#
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C)
R A maximum of 55% (antif reeze pr otection
down to-45°C) N
No ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 351). &
W
WARNING
ARNING Risk of /re and injury from
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. If it comes into contact with hot com-
ponents, it may ignite. #
Make sure that windscreen washer con-
cent rate is not spilled near tothe /ller
opening. *
N NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. Te
ch nical data
353
353

All
ot
All other models
her models
Char getime – mode 4
with app rox. 100 kW charging
capacity App
rox. 30
min
Char getime – mode 3
with 11 kW charging capacity
(depending on the condition of
th eve hicle body) App
rox. 5 h
45 min
Char getime – mode 2
with 3.7 kW charging capacity App
rox. 18 h
15 min
Char getime – mode 2
with 2.3 kW charging capacity App
rox. 30 h Charging times – modes 2 and 3 apply
toAC
ch arging from 10% to100% of the usable energy
content.
Charging time – mode 4 applies toDC charging
from 10% to80% of the usable energy content.
The time take nto charge the battery depends on
th ech arge status of the batter y,the ambient tem-
perature and thech arging capacity of the batter y.The
charging capacit y,in turn, depends on the
supply voltage, the cur rent intensity and the type
of po wer suppl y.
The nominal voltage range foryo ur vehicle can be
fo und on the information label in the soc ket co ver
( / page 163). T T
r
railer hitch
ailer hitch Gener
Gener
al not
al notes on t
es on t he tr
he trailer hitch
ailer hitch Modi/cations
tothe engine cooling system may
be necessar y,depending on theve hicle model.
The retro/tting of a trailer hitch is on lypermissi-
ble if a towing capacity is speci/ed in your vehicle
documents.
Fu rther information can be obtained at a quali/ed
specialist workshop. Mounting dimensions of t Mounting dimensions of t
he tr
he tr ailer hitch
ailer hitch 1
Fastening points
2 Overhang dimension
3 Rear axle cent reline 356
356
Te
ch nical data

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Á
Key not detected (white dis-
play message) *T
hekey is cur rently unde tected. #
Change the location of theke y in theve hicle. #
Ifth eke y is still not recognised, place it in the slot for starting with theke y (/ page 151).
Á Key not detected (red dis-
play message) *T
hekey cann otbe de tected and may no longer be in theve hicle.
The key is no lon ger in theve hicle and you switch o. theve hicle:
R You can no longer start theve hicle.
R You cannot centrally lock theve hicle. #
Ensu rethat theke y is in theve hicle.
If th eke y de tection function has a malfunction due toa st rong radio signal source: #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Place theke y in the slot for starting the engine with theke y (/ page 151).
Á Key being initialised Please
wait *T
hevehicle is processing in order to teach in the new key. #
Wait until processing is comple te. Display messages and
warning/indicator lamps
363
363

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Place the key in the
marked space See Owner's
Manual *K
eydetection is malfunctioning. #
Change the location of theke y in theve hicle. #
Place theke y in the slot for starting the engine with theke y (/ page 151). Lights Lights
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
:
Left dipped beam (examp le) *T
he cor responding light source is defecti ve. #
Drive on carefull y. #
Consult a quali/ed specialist workshop immediatel y.
% LED light sources: the display message forth e cor responding light appears only when all the light-emitting diodes
in the light are faulty.
: Malfunction See Owner's
Manual *T
heexterior lighting is malfunctioning. #
Consult a quali/ed specialist workshop.
*V Vehicles wit ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:a fuse may ha veblown. #
Stop theve hicle in accordance with the tra1c conditions. #
Check the fuses and replace them if necessary (/ page 328).364
364
Display messages and
warning/indicator lamps

Climat
Climat
e contr
e contr ol
ol Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
&
inoperative High-voltage
battery charging incom-
plete *T
he high- voltage battery is charging. Pre-ent ryclimate cont rol cannot be switched on. #
Wait until thech arging process has achie ved a minimum charge.
&
inoperative Charge HV bat-
tery *T
hecharge ofthe high-voltage battery is too lo w.Pre-entry clima tecont rol cannot be switched on. #
Char gethe high-voltage batter y.
& Pre-entry climate control
(via key) available again
after engine start *Y
ou ha veattem pted toswitch on pre-ent ryclimate cont rol more than thre e times with theve hicle switched o.. #
Start theve hicle forte n seconds.
Pre-entry clima tecont rol is operational again. 366 366
Display message
s andwarning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Drive on carefull y. #
Consult a quali/ed specialist workshop.
v
Towing not permitted See
Owner's Manual *T
he drive system is malfunctioning. #
Have theve hicle transpo rted only using a transpor ter or trailer (/ page 323).
ò Acoustic presence indica-
tor inoperative *T
he sound generator (acoustic vehicle warning system) is malfunctioning. No driving noises are being produced. The
ve hicle may not be heard by otherroad users. #
Drive with particular care. #
Consult a quali/ed specialist workshop.
To switch off the engine,
press the Start/Stop but-
ton for at least 3 seconds
or 3 times. *Y
ou ha vepressed the start/s top button while theve hicle is in motion. #
Toswitch o. the drive system while theve hicle is in motion (/ page 151).368 368
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
+
Top up coolant See Own-
er’s Manual *T
he coolant le vel is too lo w.
* N
N O OTE
TE Damage tothe drive system due toinsu1cient coolant #
Avoid long journe yswith insu1cient coolant. #
Have the cooling system of the drive system checked at a quali/ed specialist workshop.
ÿ
Coolant Stop vehicle
Switch engine off *T
he coolant is too hot. #
Stop theve hicle immediately in accordance with the tra1c conditions and switch o. the drive system. &
W WARNING ARNING Risk of injury due tooverheated vehicle
If yo u open the bonnet in theev ent of an overheated vehicle or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Intheev ent of overheating or /re in the engine compartment, keep the bonnet closed and call the /re
service. #
Allow theov erheated vehicle tocool down /r stifyo u need toopen the bonnet. #
Wait until the drive system has cooled down. #
Make sure that the air supply totheve hicle radiator is not obstructed. Display messages and
warning/indicator lamps
369
369