MERCEDES-BENZ EQE SALOON 2022 Owners Manual

When Sound Experience is activated, di.erent
situations, forex ample thech arging cable
connector being inse rted and remo ved or the
beginning of thech arging process, are
accompanied byselected sounds. For infor-
mation on Sound Experience, please referto
th e Digital Owner's Manual.
V
V ehicles wit
ehicles wit h an electr
h an electr ic socke
ic soc ket
t0ap:
0ap: if acharging
cable is not connected totheve hicle aTer the
soc ket 0ap has been opened, the soc ket 0ap will
close again automaticall y.
When thech arging cable is connected totheve hi-
cle, theve hicle cann otbe star ted or mo ved.
At the start of thech arging process, thech arge
le ve l display is shown in the driver's display with a
ch arging prediction. The charging prediction
re fers to the time at which the high-voltage bat-
te ry will be fully charge d.
% When theve hicle is switched on, a lightning
symbol appears next tothech arge leve l dis-
play in the driver's display during thech arging
process. %
Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control). Ending t Ending t
he dir
he direct curr
ect curr ent c
ent char
harging pr
ging pr ocess (mode
ocess (mode
4)
4) R
R
eq
eq uir
uir ements:
ements:
R The distance between theke y and theve hicle
does not exceed 1 m. Combo 1 v
Combo 1 v ehicle socket
ehicle soc ket #
Press charging inter ruption button 2.
The charging process is ended. Status displ ay
1 lights up white. The vehicle soc ket is
unloc ked. #
Press and hold button 3onthech arging
cable connector and remo vethech arging
cable connector from theve hicle soc ket. 208
208
Driving and parking

%
Ifyo u cannot remo vethech arging cable con-
nector, unlock theve hicle and repeat the pro-
cedure. If thech arging cable connector is still
loc ked, contact a quali/ed specialist work-
shop.
% Status displ ay1 indicator lamp remains lit
fo r some time aTer thech arging cable con-
nector has been remo ved and then goes out. #
Insert soc ket co ver4 into the lo werve hicle
soc ket connection. #
Close the soc ket 0ap.
Fo rve hicles with an elect ric soc ket 0ap,
obser vethe no tes at the end of the section. Combo 2 v
Combo 2 v
ehicle socket
ehicle soc ket #
Press charging inter ruption button 2.
The charging process is ended. Status displ ay
1 lights up white. The vehicle soc ket is
unloc ked. #
Remo vecharging cable connector 3from
th eve hicle soc ket. %
Ifyo u cannot remo vethech arging cable con-
nector, unlock theve hicle and repeat the pro-
cedure. If thech arging cable connector is still
loc ked, contact a quali/ed specialist work-
shop.
% Status displ ay1 indicator lamp remains lit
fo r some time aTer thech arging cable con-
nector has been remo ved and then goes out. #
Insert soc ket co ver4 into the lo werve hicle
soc ket connection. #
Close the soc ket 0ap.
Fo rve hicles with an elect ric soc ket 0ap,
obser vethefo llowing no tes on closing the
soc ket 0ap.
The electric soc ket 0ap closes automatically in
th efo llowing situations:
R shortly aTer thech arging cable connector has
been remo ved
R aTer the soc ket 0ap has been tapped in the
direction toclose it
R aTer the transmission position i,hork
has been engaged Driving and parking
209
209

A
A
ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he electr
he electric
ic
soc ke
soc ket
t0ap
0ap
If an obstacle impedes the electric soc ket 0ap
during the closing process, the soc ket 0ap opens
again automatically and the driver's display sho ws
a cor responding display message. The automatic
re ve rsing function is only an aid and is not a sub-
stitute foryo ur attentiveness. #
When closing the soc ket 0ap, make sure that
no body parts or objects are in the closing
area. F
F
unction of t
unction of t he c
he charg
harg e lev
e lev el displa
el displa y in t
y in the dr
he dr iv
iver's
er's
display
display %
The data shown in the illust ration is example
data. 1
Range at cur rent charge level
2 Current state of charge ofthe high-voltage
battery
3 Maximum state of charge (depending on the
setting)
4 Time remaining until comple tely ch arge d (until
th e selected maximum charge leve l is
re ached)
5 Char geleve lre commended byRange Assis-
ta nt toreach the next destination
6 Dynamic charge leve l display
7 Current charging capacity %
Speci/ed remaining range 1may vary due to
di.erent factors, e.g. driving st yle or topog ra-
ph y.
When theve hicle is connected tothe mains sup-
ply and is switched o., the driver's display sho ws
th ech arge leve l display for appr oximately two
minutes.
% The value of cur rent charging capacity 7can
di.er from the display on thech arging station.
At ach arging capacity of 10 kW or highe r,the
va lue in thech arge leve l display is rounded o.
and shown without a decimal place.
The value in 4varies depending on the setting of
th ech arging process. It displ aysth ech arging pre-
diction, e.g. the time at which the selected charge
le ve l will be reached or thech arge leve l at the
pre-selected departure time. 210 210
Driving and parking

Con/gur
Con/gur
ing
ingt
the c
he c har
harging se
ging se ttings
ttings Multimedia system:
4 © 5
EQ 5
Charging
Se
Se tting t
tting t he c
he char
harging pr
ging pr ogr
ogram
am #
Select Home, WorkorStandard.
Opening t Opening t he socke
he soc ket
t 0ap 0ap #
Press Open socket flap.
The soc ket 0ap opens.
% Further no tes on charging with alternating
cur rent: (/ page 201) or direct cur rent:
(/ page 205).
U
Unloc nloc king t
king t he c
he char
harging cable (mode 3 or 4)
ging cable (mode 3 or 4)
When the function is active, thech arging cable is
unloc ked when the maximum charge leve l is
re ached. #
Select HomeorWork. #
Activate or deactivate Unlock charging cable.
A
A ctiv
ctiv ating or deactiv
ating or deactiv ating location-based c
ating location-based c har
harging ging #
Select Charge at home orCharge at work . #
Activate or deactivate Select based on loca-
tion .
When the function is activated, theve hicle's cur-
re nt position is sa ved as one of the selected
options. When the address is reached again, the
ch arging prog ram is automatically switched over
as soon as parking position jis engaged.
A
A ctiv
ctiv ating or deactiv
ating or deactiv ating EC
ating ECO c
O char
harging
ging #
Activate or deactivate the function.
The ECO charging function limits thech arging
vo ltage at charging stations toconser vetheve hi-
cle's batter y.
Se
Se tting t
tting t he depar
he depar tur
tur e time
e time
The set depa rture times are used forth eve hicle's
pre-ent ryclimate cont rol and for predictions
re ga rding the appr oximate state of charge and
ra nge at the time selected. The charging process
alw ays starts immediatel y,irre specti veofthe next
departure time. #
Select Departure time.
The following charging times can be selected:
R individual charging times R
OnWeek profile
Se
Se tting an individual depar
tting an individual depar tur
ture time
e time #
Select Add new time and set a new departure
time.
or #
Select ´and adapt an existing departure
time.
Se
Se tting t
tting t he r
he repeat da ys
epeat da ys #
Select Add new time and set a new depa rture
time. #
Mark there leva nt we ekda ysfor which the
departure time will apply and con/ rmwith
a.
or #
Select ´and edit existing repeat da ys.
Se
Se tting a br
tting a br eak in t
eak in the c
he char
harging pr
ging process ocess
Up tofour breaks in thech arging process can be
set during which theve hicle is not charge d, even
if it is connected toach arging station. #
Select Charging interruptions . Driving and parking
211
211

#
Select Add new time andthen set and sa ve
th e times forth e beginning and end of the
break. #
Activate or deactivate thech arging breaks that
ha ve been set.
Set charging breaks can be edited with the´
button or dele ted with theE button. P
P
ar
ar king
king P
P
ar
ar king t
king t he v
he vehicle
ehicle &
W
WARNING
ARNING Risk of accident and injury
caused byan insu1ciently secured vehi-
cle rolling away
If th eve hicle is not securely par ked su1-
cient ly,it can rollawa y in an uncontrolled way
eve n at a slight downhill gradient. #
On uphill or downhill gradients, turn the
front wheels so that theve hicle rolls
to wa rdsth eke rb if it starts moving. #
apply the parking brake. #
Switch the transmission toposition j. &
W
WARNING
ARNING Risk of accident and inju rydue
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c.
R operate vehicle equipment and become
trapped, forex ample.
In addition, thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. #
Keep theve hicle key out of there ach of
ch ildren. *
N
NOOTE
TE Damage totheve hicle due toitro ll-
ing away #
Always secure theve hicle against rolling
awa y. *
N
NO
O TE
TE Damage caused byvehicle being
lo we red V
V
ehicles AIRMA
ehicles AIRMA TIC:
TIC:Thevehicle can be lo w-
ered due todi.erences in temp erature or
ex tended non-operational times. This can
cause damage toparts of the body. #
When stopping theve hicle and when
driving o., make sure that there are no
obstacles such as kerbs under or in the
immediate vicinity of the body. %
Ifyo u park theve hicle for a long period,
obser vethefo llowing no tes:
R Make sure the high-voltage battery has a
su1cient state of charge , especially at
ve ry low outside temp eratures. In this way
yo u can avoid any problems when the
ve hicle is subsequently star ted. 212
212
Driving and parking

R
If possible, avoid parking spaces in direct
sunlight.
Obser vethe no tes on charging the high-volt-
age battery (/ page 193). Ve
hicles with cent ral display Ve
hicles with MBUX Hyperscreen #
Bring theve hicle toa standstill bypressing the
brake pedal. #
Ongradients, turn the front wheels so that the
ve hicle will rollto wa rdsth eke rb if it starts
moving. #
Apply the electric parking brake. #
Engage transmission position jin a station-
ary vehicle with the brake pedal depressed
(/ page 192). #
Switch o. theve hicle bypressing button 1. #
Release the service brake slo wly. #
Get out of theve hicle and lock it.
% When you park theve hicle, you can still oper-
ate the side windo wsand the panoramic slid-
ing sunroof for appr oximately four minutes if
th e driver's door is closed. Driving and parking
213
213

Electr
Electr
ic par
ic parking br
king br ake
ake F
F
unction of t
unction of t he electr
he electric par
ic parking br
king br ak
ake (appl
e (appl ying
ying
aut
aut omaticall
omaticall y)
y) &
W
WARNING
ARNING Risk of accident and injury due
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c.
R operate vehicle equipment and become
trapped, forex ample.
In addition, thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. #
Keep theve hicle key out of there ach of
ch ildren. The electr
The electr
ic par
ic parking br
king br ak
ake is applied if t
e is applied if t he tr
he trans-
ans-
mission is in position
mission is in position j
jand one of t
and one of t he f
he follo
ollowing
wing
conditions is
conditions is ful/lled:
ful/lled:
R The vehicle is switched o..
R The seat belt tongue is not inse rted in the seat
belt buckle of the driver's seat and the driver's
door is opened.
% Toprev ent application: pull the handle of the
electric parking brake (/ page 215).
In t
In t he f
he f ollo
ollowing situations, t
wing situations, t he electr
he electric par
ic parking
king
br
br ak
ak e is also applied:
e is also applied:
R The HOLD function is keeping theve hicle sta-
tionar y.
R Active Parking Assist is keeping theve hicle
stationar y.
R Active Distance Assist DISTRONIC is bringing
th eve hicle toa standstill. R
In addition, one of t
In addition, one of t he f
he follo
ollowing conditions
wing conditions
mus
mus t be
t be ful/lled:
ful/lled:
- The vehicle is switched o..
- The seat belt tongue is not inse rted in the
seat belt buckle of the driver's seat and
th e driver's door is opened.
- There is a system malfunction.
- The po wer supply is insu1cient.
- The vehicle is stationary for a lengt hy
period.
When the electric parking brake is applied, the
re d! indicator lamp lights up in the driver's
displa y.
F
F unction of t
unction of t he electr
he electric par
ic parking br
king br ak
ake (r
e (r eleasing
eleasing
aut
aut omaticall
omaticall y)
y)
The electr
The electr ic par
ic parking br
king br ak
ake is r
e is r eleased when t
eleased when t he
he
f
f ollo
ollo wing conditions ar
wing conditions ar e
eful/lled:
ful/lled:
R The driver's door is closed.
R The vehicle has been star ted.
R The transmission is in position hork and
yo u depress the accelerator pedal or you shiT 214
214
Driving and parking

from transmission position
jtoh ork
when on le velgr ound.
R Ifth e transmission is in position k,the boot
lid must be closed.
R The seat belt tongue is inse rted into the seat
belt buckle of the driver's seat.
If th e seat belt tongue is not inse rted into the
seat belt buckle of the driver's seat, one of the
fo llowing conditions must be ful/lled:
- You shiT from transmission position j.
or
- You ha veprev iously driven at speeds
gr eater than 3 km/h.
When the electric parking brake is released, the
re d! indicator lamp in the driver's display
goes out. Appl
Appl ying/r
ying/r eleasing t
eleasing t he electr
he electric par
ic parking br
king br ake
ake
manually
manually
Appl Appl ying
ying #
Push handle 1.
The red! indicator lamp lights up in the
driver's displa y. %
The electric parking brake is only securely
applied if there d! indicator lamp is lit
continuousl y.
R R eleasing eleasing #
Switch on theve hicle. #
Pull handle 1.
The red! indicator lamp in the driver's
display goes out.
Emerg
Emerg ency br
ency br aking
aking #
Press and hold handle 1.
As long as theve hicle is driving, theRelease
parking brake message is displa yed and the
re d! indicator lamp 0ashes.
When theve hicle has been braked toa stand-
still, the electric parking brake is applied. The
re d! indicator lamp lights up in the driv-
er's displa y. Inf
Inf
or
ormation on collision det
mation on collision det ection on a park
ection on a parked
ed
v
v ehicle
ehicle If a collision is de
tected when theto w- awa y pro-
te ction is primed on a loc kedve hicle, you will Driving and parking
215
215

re
ceive a noti/cation in the multimedia system
when you switch theve hicle on.
Yo u will receive information about thefo llowing
points:
R The area of theve hicle that may ha vebeen
damaged.
R The forc e of the impact.
The following situation can lead toinadver tent
activation:
R The par kedve hicle is mo ved, fore xamp le, in a
two-stor eygarage.
% Deactivate tow- awa y protection in order to
pr ev ent inadver tent activation. If you deacti-
va te to w-awa y protection, collision de tection
will also be deactivated.
Yo u can permanently deactivate collision
de tection via the multimedia system
(/ page 216). Syst Syst
em limits em limits
De tection may be restric ted in thefo llowing situa-
tions:
R theve hicle is damaged without impact,
fo re xamp le, if an outside mir ror is torn o. or
th e paint is damaged byakey
R an impact occurs at low speed
R the electric parking brake is not applied
% You are responsible foryo ur vehicle. There-
fo re , alw ays make sure that your vehicle is
free of damage and is roadwor thy. Se
Se
tting collision det
tting collision det ection on a park
ection on a park ed v
ed vehicle
ehicle Multimedia system:
4 © 5
Settings 5
Vehicle
5 Open/close 5
Vehicle protection #
Activate or deactivate the function via Colli-
sion notification.
% A maximum of thre e incidents can be regis-
te re d. Up to15 pho tos are take nfo rev ery
incident. In theev ent of ano ther incident, thepho
tos of the /rst incident will be overwritten
if th ey have not been dele ted already.
A
A ctiv
ctiv ating or deactiv
ating or deactiv ating t
ating t he collision phot
he collision phot os
os
function
function
No tepossible legal restrictions in some count ries
re ga rding automatic recording of theve hicle sur-
ro undings. #
Activate or deactivate Take photos.
T T r
ransf
ansf err
erring t
ing t he collision phot
he collision phot os wit
os with t
h the
he
Mer
Mer cedes me App
cedes me App #
Select Upload to Mercedes me . #
Select Upload automatically . #
Scan thege nerated QR code on the central
display with the Mercedes me App.
The encryp ted collision pho tos will then be
uploaded toMercedes me.
% Any device that can scan QR codes can be
used toview the collision pho tos in the
Mercedes me App.
Cop
Cop ying t
ying t he collision phot
he collision phot os t
os to a USB
o a USB 0ash
0ashdr
drive
ive #
Connect a USB 0ash drive . 216
216
Driving and parking

#
Select Manage collision photos .#
Select Copy (USB) .
All collision ph otos are copied tothe USB
0ash drive.
% Toensure secure operation, only use with
FA T32 or exFA Tfo rm atted USB storage devi-
ces.
Dele
Dele ting collision phot
ting collision phot os
os #
Select Manage collision photos .#
Select Delete.
All collision pho tos will be dele ted. Dr
Dr
iving and dr
iving and dr iving safe
iving safety sy
ty syst
stems
ems Dr
Dr
iving syst
iving syst ems and y
ems and y our r
our r esponsibility
esponsibility Yo
ur vehicle is equipped with driving systems
which assist you in driving, parking and manoeu-
vring theve hicle. The driving systems are only
aids. They are not a substitute foryo u paying
attention toyour sur roundings and do not relie ve
yo u of your responsibility per taining toroad tra1c
la w. The driver is alw aysre sponsible for maintain-
ing a safe distance totheve hicle in front, forve hi- cle speed,
for braking in good time and for st aying
in lane. Pay attention tothe tra1c conditions at
all times and inter vene when necessar y.Be awa re
of the limitations rega rding the safe use of these
systems.
Driving systems can neither reduce therisk of
accident if youfa ilto adapt your driving style nor
ove rride the la wsof ph ysics. They cannot alw ays
ta ke into account road, weather or tra1c condi-
tions. Inf Inf
or
ormation on v
mation on v ehicle sensor
ehicle sensor s and camer
s and cameras
as Some driving and driving saf
ety sy stems use cam-
eras as well as radar or ultrasonic sensors to
monitor the area in front of, behind or next tothe
ve hicle. 1
Multifunction camera
2 Cameras in the outside mir rors
3 Front radar
4 Front camera Driving and parking
217
217